EF Logo

JLG · Engine

JLG Fault Code 4‑3

Engine fault

What does JLG code 4-3 mean?

Covers engine help messages: high engine temp, air filter bypassed, no alternator output (battery still under 12.5 V after 15 s running), low oil pressure, oil/coolant/fuel sensor shorts, Ford ECM codes passed through, and lost RS-485 link to a Ford ECM. Urgency: check soon - the machine may derate or limit a function. Check first: read the Help message to see the exact engine item named.

FaultCheck4-3JLG · Engine

Can I keep running with it?

Check soon

The machine may derate or limit a function. Find the cause before the next shift.

What should I check first?

Read the Help message to see the exact engine item named

Then 4 more checks
Code shows hereFAULT4-3

Where this code shows

Turn the key on and watch the fault lamp or platform display.

Checks

0 of 5 done

Causes

  • Low oil level or a failed oil pressure sender (Deutz low pressure shows under about 8 PSI)
  • Alternator not charging or the belt slipping
  • Air filter restriction switch tripped by a clogged filter
  • Sensor wiring shorted to ground or battery on oil, coolant or fuel inputs
1 more cause
  • Ford ECM fault code stored, or the RS-485 link to the ECM lost

How it failed

You'll notice: An engine warning from the controller shows with the lamp flashing 4-3, and the Help text names the item.

OtherRead from how the source describes the code

The source does not say how this one failed.

Meter test
Read the code with the service tool and note which other codes are active with it.
Good result
Codes that appear together usually share one cause - start with the wiring they share.

When to stop

Let the engine cool before opening the cooling system; a hot cap releases scalding coolant. Running on with an overheat warning risks a head gasket or seized engine.

Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Same part, other failures: Engine speed, temperature, oil pressure, fuel level and ECM

Source

JLG 600S/600SJ/660SJ/600A/AJ Service and Maintenance Manual 3120840, section 6 (Tables 6-3, 6-5)

This source lists 4-3 and its meaning. The guidance on this page is general, not taken from it.

The source covers: JLG boom lifts with the JLG Control System (600S, 600SJ, 660SJ, 600A/AJ, 450A, 510A, 400S, 1200/1350SJP families).

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.