EF Logo

JLG · Engine

JLG Fault Code 4‑2

Engine over temperature

What does JLG code 4-2 mean?

Engine coolant is hotter than the limit (above about 117 C on Ford engines, above 130 C on Deutz). If engine shutdown is configured the engine stops. Urgency: stop now - shut down and fix before working on. Check first: let the engine cool, then check the coolant level and look for leaks around the radiator and hoses.

FaultStop4-2JLG · Engine

Can I keep running with it?

Stop now

Shut down and fix before working on. Running on risks damage or the machine locks out.

What should I check first?

Let the engine cool, then check the coolant level and look for leaks around the radiator and hoses

Then 4 more checks
Code shows hereFAULT4-2

Where this code shows

Turn the key on and watch the fault lamp or platform display.

Checks

0 of 5 done

Causes

  • Coolant low from a leak or a loose hose clamp
  • Radiator fins or oil cooler blocked with dirt and chaff
  • Fan belt slipping or broken, or an electric fan that is not running
  • Thermostat stuck closed so the coolant does not circulate
1 more cause
  • Coolant temperature sender reading too high

How it failed

You'll notice: The engine coolant temperature warning shows and, if shutdown is set up, the engine stops.

Real conditionRead from how the source describes the code

The sensor reading is valid but outside the allowed range - the problem may be real.

allowed rangetime
The reading against the band the controller allows.
Meter test
Check the real value with a separate gauge or thermometer before blaming the sensor.
Good result
If the gauge agrees with the display, fix the machine, not the sensor.

When to stop

Let the engine cool before opening the cooling system; a hot cap releases scalding coolant. Running on with an overheat warning risks a head gasket or seized engine.

Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Same part, other failures: Engine speed, temperature, oil pressure, fuel level and ECM

Source

JLG 600S/600SJ/660SJ/600A/AJ Service and Maintenance Manual 3120840, section 6 (Tables 6-3, 6-5)

This source lists 4-2 and its meaning. The guidance on this page is general, not taken from it.

The source covers: JLG boom lifts with the JLG Control System (600S, 600SJ, 660SJ, 600A/AJ, 450A, 510A, 400S, 1200/1350SJP families).

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.