EF Logo

J1939 · Aftertreatment - DPF

SPN 3716 Fault Code

DPF high-idle regeneration coolant temperature

What does SPN 3716 mean?

Coolant has not reached the temperature needed for a high-idle regeneration, so the regeneration was stopped. How urgent it is depends on the FMI after SPN 3716 - pick it below. Check first: watch the coolant temperature climb at high idle and note where it levels off.

FaultActiveSPN 3716FMI --J1939 engine ECU
SPN 3716
DPF high-idle regeneration coolant temperature
FMI ?
How it failed - the number after the SPN

Can I keep running with it?

Depends on the FMI

How urgent it is depends on the FMI after SPN 3716 - pick it below.

What should I check first?

Watch the coolant temperature climb at high idle and note where it levels off

Then 4 more checks
Plug the service tool in hereDiagnosticport, 9-pin

Where to read it

Connect a J1939-capable scan tool to the 9-pin diagnostic port.

Which FMI shows after SPN 3716?

You'll notice: The parked regeneration stops early and the soot load stays high.

Find the number shown after SPN 3716 on your display.

  • 31SPN 3716 FMI 31: The condition behind the DPF high-idle regeneration coolant temperature fault exists and is activeReal conditionDetroit DD15, Detroit DD13, Detroit DD13 Gen 5, Detroit DD15 Gen 5

Checks

0 of 5 done

When to stop

Repeated aftertreatment faults lead to an engine derate. Parked regenerations and dosing tests are run with the service tool; do not remove or bypass DPF or SCR parts.

How urgent SPN 3716 is depends on its FMI and whether the engine has derated. Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Causes

  • Thermostat stuck open
  • Very cold ambient
  • Coolant shutters or winter front missing
  • Fan staying on

Source

Detroit Diesel DD15 2017-2020 fault codes list (Diesel Laptops)

This list names SPN 3716 and the FMIs above for the engines it covers. The guidance on this page is general, not taken from it.

The source covers: Detroit DD13, Detroit DD15; same SPN on other J1939 engines.

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.