EF Logo

J1939 · Lubrication

SPN 175 Fault Code

Engine oil temperature 1

What does SPN 175 mean?

Engine oil temperature, read by a sensor in the oil circuit. The ECM uses it for warm-up strategy, protection and idle control. How urgent it is depends on the FMI after SPN 175 - pick it below. Check first: compare the oil temperature with the coolant temperature after a cold overnight soak; they should be within a few degrees.

FaultActiveSPN 175FMI --J1939 engine ECU
SPN 175
Engine oil temperature 1
FMI ?
How it failed - the number after the SPN

Can I keep running with it?

Depends on the FMI

How urgent it is depends on the FMI after SPN 175 - pick it below.

What should I check first?

Compare the oil temperature with the coolant temperature after a cold overnight soak; they should be within a few degrees

Then 4 more checks
Plug the service tool in hereDiagnosticport, 9-pin

Where to read it

Connect a J1939-capable scan tool to the 9-pin diagnostic port.

Which FMI shows after SPN 175?

You'll notice: Oil temperature reads wrong, so the ECM may leave cold-engine limits on or apply an oil-heat derate it does not need, and you see a gauge fault, a lamp or reduced power.

Find the number shown after SPN 175 on your display. 2 of them have their own page with causes and checks.

  • 0SPN 175 FMI 0: Value is above the normal range, most severe levelReal conditionCummins ISX15, Detroit DD15, Detroit DD13, Detroit DD13 Gen 5 and 4 more
  • 2SPN 175 FMI 2: Data is erratic, intermittent or incorrectErratic or implausibleCummins ISX15, Detroit DD13 Gen 5, Detroit DD15 Gen 5, Mack MP8 and 3 more
  • 3SPN 175 FMI 3: Signal voltage is above normal, or the circuit is shorted to a high sourceShorted highCummins ISX15, Detroit DD15, Detroit DD13, PACCAR MX-13
  • 4SPN 175 FMI 4: Signal voltage is below normal, or the circuit is shorted to a low sourceShorted lowCummins ISX15, Detroit DD15, Detroit DD13, Detroit DD13 Gen 5 and 5 more
  • 5SPN 175 FMI 5: Current is below normal, or the circuit is openOpen circuitMack MP8, Mack MP7, Volvo D13
  • 11SPN 175 FMI 11: Oil temperature data is erratic or incorrectErratic or implausiblePACCAR MX-13
  • 13SPN 175 FMI 13: The value is out of calibrationPart or controllerMack MP8, Mack MP7, Volvo D13
  • 14SPN 175 FMI 14: Oil temperature has drifted out of range, high or lowErratic or implausibleDetroit DD15
  • 15SPN 175 FMI 15: Oil temperature high pre-warningReal conditionDetroit DD15, Detroit DD13, Detroit DD13 Gen 5, Detroit DD15 Gen 5
  • 16SPN 175 FMI 16: Value is above the normal range, moderately severe levelReal conditionCummins ISX15, Mack MP8, Mack MP7, PACCAR MX-13 and 1 more
  • 17SPN 175 FMI 17: Value is below the normal range, least severe levelReal conditionMack MP8, Mack MP7, Volvo D13
  • 18SPN 175 FMI 18: Oil temperature rises too slowly during warm-up or not at allReal conditionDetroit DD15, Detroit DD13, Detroit DD13 Gen 5, Detroit DD15 Gen 5 and 1 more
  • 20SPN 175 FMI 20: Oil temperature signal is not plausibleErratic or implausibleDetroit DD15, Detroit DD13, Detroit DD13 Gen 5, Detroit DD15 Gen 5

Checks

0 of 5 done

When to stop

Let the engine cool before opening the cooling system; a hot cap releases scalding coolant. Running on with an overheat warning risks a head gasket or seized engine.

How urgent SPN 175 is depends on its FMI and whether the engine has derated. Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Causes

  • Reads cold: an open circuit or a short to supply in the engine oil temperature sensor wiring, which the ECM reads as an extremely low temperature
  • Reads hot: signal wire shorted to ground or the engine oil temperature sensor element shorted, which the ECM reads as an extremely high temperature
  • Real condition: oil cooler restricted or oil level wrong, giving a real over-temperature
  • Real condition: thermostat on the oil cooler stuck so oil never warms or overheats
1 more cause
  • Sensor: oil-soaked connector seal letting the signal drift as the oil warms

Source

Cummins ISX15 2013-2018 fault codes list (Diesel Laptops)

This list names SPN 175 and the FMIs above for the engines it covers. The guidance on this page is general, not taken from it.

The source covers: Cummins ISX15 (2013-2018) and X15; same SPN on other J1939 engines.

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.