Cummins · Air handling - SPN 412 FMI 15
Cummins Fault Code 2961
EGR temperature high - least severe
What does Cummins code 2961 mean?
The EGR gas temperature after the cooler is above the first limit. The cooler is not removing as much heat as expected. Urgency: check soon - the machine may derate or limit a function. Check first: check the coolant level and for air in the system.
Can I keep running with it?
Check soon
The machine may derate or limit a function. Find the cause before the next shift.
What should I check first?
Check the coolant level and for air in the system
Then 4 more checksWhere to read it
Connect INSITE or another J1939-capable scan tool to the 9-pin diagnostic port.
Checks
0 of 5 done
Causes
- EGR cooler fouled with soot inside
- Low coolant flow through the EGR cooler
- Coolant level low or air trapped
- EGR temperature sensor reading high
How it failed
You'll notice: Possible amber lamp, a slight power loss and more smoke under load.
OtherRead from how the source describes the code
The source does not say how this one failed.
- Meter test
- Read the code with the service tool and note which other codes are active with it.
- Good result
- Codes that appear together usually share one cause - start with the wiring they share.
When to stop
Repeated aftertreatment faults lead to an engine derate. Parked regenerations and dosing tests are run with the service tool; do not remove or bypass DPF or SCR parts.
Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Same part, other failures: EGR sensors and ECM temperature
- 2273EGR valve delta pressure sensor circuit - voltage high (shorted to a high source)Shorted highCheck soon
- 2274EGR valve delta pressure sensor circuit - voltage low (shorted to a low source)Shorted lowCheck soon
- 2375EGR temperature sensor circuit - voltage high (shorted to a high source)Shorted highCheck soon
- 2376EGR temperature sensor circuit - voltage low (shorted to a low source)Shorted lowCheck soon
- 2961EGR temperature high - least severeOtherCheck soon
- 2962EGR temperature high - moderately severeLost messageCheck soon
- 3136Engine EGR outlet pressure sensor circuit - voltage high (shorted to a high source)Shorted highCheck soon
- 3137Engine EGR outlet pressure sensor circuit - voltage low (shorted to a low source)Shorted lowCheck soon
- 3138Engine EGR outlet pressure - data erratic or incorrectErratic or implausibleCheck soon
Show the other 6 codesHide the other codes
- 697Engine ECU temperature sensor circuit - voltage high (shorted to a high source)Shorted highCheck soon
- 698Engine ECU temperature sensor circuit - voltage low (shorted to a low source)Shorted lowCheck soon
- 699Engine ECU temperature - data erratic or incorrectErratic or implausibleCheck soon
- 1866EGR delta pressure - data erratic or incorrectErratic or implausibleCheck soon
- 1867EGR temperature - data erratic or incorrectErratic or implausibleCheck soon
- 7935Engine EGR 1 temperature - abnormal rate of changeErratic or implausibleCheck soon
Other Cummins codes: Air handling - SPN 412 FMI 15
Related on Equipments Finder
Source
Cummins ISX15 (2013-2018) Fault Codes List (Diesel Repair)
This source lists 2961 and its meaning. The guidance on this page is general, not taken from it.
The source covers: Cummins ISX15/X15/ISB6.7/B6.7/L9 engines (J1939 SPN 412, FMI 15); same code list used in trucks, buses and machines with these engines.
Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
