EF Logo

Volvo/Mack · MID 144 vehicle ECU

Volvo/Mack Fault Code MID 144 PSID 25 FMI 14

Air leakage - flow too high

What does Volvo/Mack code MID 144 PSID 25 FMI 14 mean?

The air flow is too high at a speed above 50 km/h. The VECU sees an air leak in the air system. Urgency: check soon - the machine may derate or limit a function. Check first: check the air system for leaks with the engine stopped and listen at fittings.

FaultCheckMID 144PSID 25FMI 14Volvo/Mack · MID 144 vehicle ECU
MID 144
Which control unit reports it
PSID 25
Maker component at fault
FMI 14
Special instructions

Can I keep running with it?

Check soon

The machine may derate or limit a function. Find the cause before the next shift.

What should I check first?

Check the air system for leaks with the engine stopped and listen at fittings

Then 3 more checks
Plug the service tool in hereDiagnosticport, 9-pin

Where to read it

Connect the Premium Tech Tool or a J1939/J1587 scan tool to the diagnostic socket and read the codes for every module, not only the engine.

Checks

0 of 4 done

Causes

  • Air leakage in the brake or suspension air circuit
  • Leaking air dryer or purge valve
  • Worn air compressor running too much

How it failed

You'll notice: A small leak lights the info lamp and a large leak lights the service lamp.

Real conditionRead from FMI 14: special instructions

The sensor reading is valid but outside the allowed range - the problem may be real.

allowed rangetime
The reading against the band the controller allows.
Meter test
Check the real value with a separate gauge or thermometer before blaming the sensor.
Good result
If the gauge agrees with the display, fix the machine, not the sensor.

When to stop

Most sensor and wiring faults can be traced with a multimeter and the wiring diagram. Disconnect the battery before unplugging controllers; if the controller itself is suspect or needs programming, that needs the dealer’s service tool.

Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Source

Mack Group 36 Vehicle Electronic Control Unit (MID 144) Diagnostic Trouble Code Guide, PV776-88951780

This source lists MID 144 PSID 25 FMI 14 and its meaning. The guidance on this page is general, not taken from it.

The source covers: Mack and Volvo trucks with the MID 144 vehicle ECU (VECU), built from 2007; guide written for Mack, same VECU family as Volvo VN/VNL.

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.