Volvo/Mack · MID 130 transmission ECU
Volvo/Mack Fault Code MID 130 PSID 27 FMI 14
Clutch cannot disengage - engine shut down
What does Volvo/Mack code MID 130 PSID 27 FMI 14 mean?
The clutch system cannot disengage the clutch. The red stop lamp lights and the engine is shut down because gears cannot be selected. Urgency: stop now - shut down and fix before working on. Check first: do not keep driving; arrange a tow if needed before you replace any parts.
- MID 130
- Which control unit reports it
- PSID 27
- Maker component at fault
- FMI 14
- Special instructions
Can I keep running with it?
Stop now
Shut down and fix before working on. Running on risks damage or the machine locks out.
What should I check first?
Do not keep driving; arrange a tow if needed before you replace any parts
Then 3 more checksWhere to read it
Connect the Premium Tech Tool or a J1939/J1587 scan tool to the diagnostic socket and read the codes for every module, not only the engine.
Checks
0 of 4 done
Causes
- Clutch actuator or valve assembly failure
- Mechanical clutch fault
- Loss of air supply to the clutch cylinder
How it failed
You'll notice: Red stop lamp lit, the engine shuts down and you cannot shift gears or engage neutral.
OtherRead from FMI 14: special instructions
The source does not say how this one failed.
- Meter test
- Read the code with the service tool and note which other codes are active with it.
- Good result
- Codes that appear together usually share one cause - start with the wiring they share.
When to stop
Most sensor and wiring faults can be traced with a multimeter and the wiring diagram. Disconnect the battery before unplugging controllers; if the controller itself is suspect or needs programming, that needs the dealer’s service tool.
Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Same part, other failures: Clutch operation
- MID 130 PSID 27 FMI 0Clutch disengages unintentionallyReal conditionCheck soon
- MID 130 PSID 27 FMI 11Clutch dragOtherCheck soon
- MID 130 PSID 27 FMI 12Clutch slippingPart or controllerCheck soon
- MID 130 PSID 27 FMI 14Clutch cannot disengage - engine shut downOtherStop now
Other Volvo/Mack codes: MID 130 transmission ECU
Related on Equipments Finder
Source
This source lists MID 130 PSID 27 FMI 14 and its meaning. The guidance on this page is general, not taken from it.
The source covers: Mack CHU, CXU, GU and TD trucks with the mDRIVE automated transmission (MID 130 transmission control unit).
Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
