Volvo/Mack · MID 130 transmission ECU
Volvo/Mack Fault Code MID 130 PID 177 FMI 0
Transmission oil temperature high
What does Volvo/Mack code MID 130 PID 177 FMI 0 mean?
Transmission oil is overheating. The control unit has three levels: above 100 C (212 F) for 18000 s, above 120 C (248 F) for 600 s and above 140 C (284 F) for 30 s. Urgency: stop now - shut down and fix before working on. Check first: stop and let the transmission cool if the red lamp is on.
- MID 130
- Which control unit reports it
- PID 177
- Parameter at fault
- FMI 0
- Data above normal, most severe
Can I keep running with it?
Stop now
Shut down and fix before working on. Running on risks damage or the machine locks out.
What should I check first?
Stop and let the transmission cool if the red lamp is on
Then 4 more checksWhere to read it
Connect the Premium Tech Tool or a J1939/J1587 scan tool to the diagnostic socket and read the codes for every module, not only the engine.
Checks
0 of 5 done
Causes
- Transmission oil cooler blocked or low airflow
- Low or overfilled transmission oil level
- Heavy load or sustained climbing in too high a gear
- Engine coolant system overheating
How it failed
You'll notice: The yellow lamp is sent and the high transmission oil temperature symbol lights; at the highest level the red stop lamp lights.
Real conditionRead from FMI 0: data above normal, most severe
The sensor reading is valid but outside the allowed range - the problem may be real.
- Meter test
- Check the real value with a separate gauge or thermometer before blaming the sensor.
- Good result
- If the gauge agrees with the display, fix the machine, not the sensor.
When to stop
Tilt, load and interlock cutouts are what keep a lift or telehandler from tipping. Never bypass or bridge one to keep working; get the fault found before anyone goes up or lifts again.
Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Same part, other failures: Transmission oil temperature
- MID 130 PID 177 FMI 0Transmission oil temperature highReal conditionStop now
- MID 130 PID 177 FMI 4Transmission oil temperature sensor low or shortedShorted lowCheck soon
Other Volvo/Mack codes: MID 130 transmission ECU
- MID 130 PSID 1 FMI 3PWM valve quick engagement shorted high
- MID 130 PSID 1 FMI 5PWM valve quick engagement open circuit
- MID 130 PSID 22 FMI 3Counter shaft brake valve shorted high - brake applied
- MID 130 PSID 25 FMI 11First gear cannot engage
- MID 130 PSID 25 FMI 12Reverse gear cannot engage
- MID 130 PSID 27 FMI 0Clutch disengages unintentionally
- MID 130 PSID 27 FMI 11Clutch drag
Related on Equipments Finder
Source
This source lists MID 130 PID 177 FMI 0 and its meaning. The guidance on this page is general, not taken from it.
The source covers: Mack CHU, CXU, GU and TD trucks with the mDRIVE automated transmission (MID 130 transmission control unit).
Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
