EF Logo

Kubota · Engine ECU system (E:91xx)

Kubota Fault Code E:9118

Engine oil pressure system error

What does Kubota code E:9118 mean?

The engine oil pressure is low or the sensor circuit reports a fault. Stop the engine if the pressure is really low. Urgency: stop now - shut down and fix before working on. Check first: stop the engine and check the oil level on the dipstick.

FaultStopE:9118Kubota · Engine ECU system (E:91xx)

Can I keep running with it?

Stop now

Shut down and fix before working on. Running on risks damage or the machine locks out.

What should I check first?

Stop the engine and check the oil level on the dipstick

Then 4 more checks
Code shows hereFAULTE:9118

Where this code shows

Watch the meter panel: a warning lamp comes on and the E: code scrolls on the display.

Checks

0 of 5 done

Causes

  • Low oil level
  • Oil pump or pickup worn or blocked
  • Oil pressure sensor failed
  • Wiring fault

How it failed

You'll notice: Oil pressure lamp and E:9118 lit; stop the engine at once to avoid damage.

OtherRead from how the source describes the code

The source does not say how this one failed.

Meter test
Read the code with the service tool and note which other codes are active with it.
Good result
Codes that appear together usually share one cause - start with the wiring they share.

When to stop

Low oil pressure can wreck bearings in minutes. Stop the engine and check the level before restarting; if the level is right, do not run it again until the pressure is checked with a gauge.

Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Same part, other failures: Coolant, intake air temperature, oil pressure and overheat

Source

CodeReady - Kubota Skid Steer Loader Error Codes (SSV65, SSV75, SVL65-2, SVL75-3, SVL97-2), error code table

This source lists E:9118 and its meaning. The guidance on this page is general, not taken from it.

The source covers: Kubota SSV65, SSV75, SVL65-2, SVL75-3, SVL97-2 loaders (the models the source lists).

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.