JLG · Engine
JLG Fault Code 4‑3
Engine fault
What does JLG code 4-3 mean?
Covers engine help messages: high engine temp, air filter bypassed, no alternator output (battery still under 12.5 V after 15 s running), low oil pressure, oil/coolant/fuel sensor shorts, Ford ECM codes passed through, and lost RS-485 link to a Ford ECM. Urgency: check soon - the machine may derate or limit a function. Check first: read the Help message to see the exact engine item named.
Can I keep running with it?
Check soon
The machine may derate or limit a function. Find the cause before the next shift.
What should I check first?
Read the Help message to see the exact engine item named
Then 4 more checksWhere this code shows
Turn the key on and watch the fault lamp or platform display.
Checks
0 of 5 done
Causes
- Low oil level or a failed oil pressure sender (Deutz low pressure shows under about 8 PSI)
- Alternator not charging or the belt slipping
- Air filter restriction switch tripped by a clogged filter
- Sensor wiring shorted to ground or battery on oil, coolant or fuel inputs
1 more causeFewer causes
- Ford ECM fault code stored, or the RS-485 link to the ECM lost
How it failed
You'll notice: An engine warning from the controller shows with the lamp flashing 4-3, and the Help text names the item.
OtherRead from how the source describes the code
The source does not say how this one failed.
- Meter test
- Read the code with the service tool and note which other codes are active with it.
- Good result
- Codes that appear together usually share one cause - start with the wiring they share.
When to stop
Let the engine cool before opening the cooling system; a hot cap releases scalding coolant. Running on with an overheat warning risks a head gasket or seized engine.
Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Same part, other failures: Engine speed, temperature, oil pressure, fuel level and ECM
- 4-2Engine over temperatureReal conditionStop now
- 4-3Engine faultOtherCheck soon
- 5-5Engine RPM / speed sensor problemOtherCheck soon
- 0031Fuel level low - engine shutdownLost messageCheck soon
- 431Fuel Sensor - short to batteryShorted highCheck soon
- 432Fuel Sensor - short to groundShorted lowCheck soon
- 433Oil Pressure - short to batteryShorted highCheck soon
- 434Oil Pressure - short to groundShorted lowCheck soon
- 435Coolant Temperature - short to groundShorted lowCheck soon
Show the other 6 codesHide the other codes
Other JLG codes: Engine
Related on Equipments Finder
Source
JLG 600S/600SJ/660SJ/600A/AJ Service and Maintenance Manual 3120840, section 6 (Tables 6-3, 6-5)
This source lists 4-3 and its meaning. The guidance on this page is general, not taken from it.
The source covers: JLG boom lifts with the JLG Control System (600S, 600SJ, 660SJ, 600A/AJ, 450A, 510A, 400S, 1200/1350SJP families).
Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
