JLG · Engine
JLG Fault Code 4‑2
Engine over temperature
What does JLG code 4-2 mean?
Engine coolant is hotter than the limit (above about 117 C on Ford engines, above 130 C on Deutz). If engine shutdown is configured the engine stops. Urgency: stop now - shut down and fix before working on. Check first: let the engine cool, then check the coolant level and look for leaks around the radiator and hoses.
Can I keep running with it?
Stop now
Shut down and fix before working on. Running on risks damage or the machine locks out.
What should I check first?
Let the engine cool, then check the coolant level and look for leaks around the radiator and hoses
Then 4 more checksWhere this code shows
Turn the key on and watch the fault lamp or platform display.
Checks
0 of 5 done
Causes
- Coolant low from a leak or a loose hose clamp
- Radiator fins or oil cooler blocked with dirt and chaff
- Fan belt slipping or broken, or an electric fan that is not running
- Thermostat stuck closed so the coolant does not circulate
1 more causeFewer causes
- Coolant temperature sender reading too high
How it failed
You'll notice: The engine coolant temperature warning shows and, if shutdown is set up, the engine stops.
Real conditionRead from how the source describes the code
The sensor reading is valid but outside the allowed range - the problem may be real.
- Meter test
- Check the real value with a separate gauge or thermometer before blaming the sensor.
- Good result
- If the gauge agrees with the display, fix the machine, not the sensor.
When to stop
Let the engine cool before opening the cooling system; a hot cap releases scalding coolant. Running on with an overheat warning risks a head gasket or seized engine.
Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Same part, other failures: Engine speed, temperature, oil pressure, fuel level and ECM
2 other codes on this part are also real condition (438, 4323). When they show together, start at the wiring and connector they share.
- 4-2Engine over temperatureReal conditionStop now
- 4-3Engine faultOtherCheck soon
- 5-5Engine RPM / speed sensor problemOtherCheck soon
- 0031Fuel level low - engine shutdownLost messageCheck soon
- 431Fuel Sensor - short to batteryShorted highCheck soon
- 432Fuel Sensor - short to groundShorted lowCheck soon
- 433Oil Pressure - short to batteryShorted highCheck soon
- 434Oil Pressure - short to groundShorted lowCheck soon
- 435Coolant Temperature - short to groundShorted lowCheck soon
Show the other 6 codesHide the other codes
Other JLG codes: Engine
Related on Equipments Finder
Source
JLG 600S/600SJ/660SJ/600A/AJ Service and Maintenance Manual 3120840, section 6 (Tables 6-3, 6-5)
This source lists 4-2 and its meaning. The guidance on this page is general, not taken from it.
The source covers: JLG boom lifts with the JLG Control System (600S, 600SJ, 660SJ, 600A/AJ, 450A, 510A, 400S, 1200/1350SJP families).
Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
