J1939 · Aftertreatment - SCR/DEF
SPN 520329 Fault Code
DEF flow quantity
What does SPN 520329 mean?
DEF quantity actually delivered compared with what the control module commanded; it is below normal when too little fluid reaches the doser. How urgent it is depends on the FMI after SPN 520329 - pick it below. Check first: check DEF pump pressure with the service tool against the target during a dosing test.
- SPN 520329
- DEF flow quantity
- FMI ?
- How it failed - the number after the SPN
Can I keep running with it?
Depends on the FMI
How urgent it is depends on the FMI after SPN 520329 - pick it below.
What should I check first?
Check DEF pump pressure with the service tool against the target during a dosing test
Then 4 more checksWhere to read it
Connect a J1939-capable scan tool to the 9-pin diagnostic port.
Which FMI shows after SPN 520329?
You'll notice: Dosing is too weak, so NOx output rises and an SCR warning may appear.
Find the number shown after SPN 520329 on your display.
- 31SPN 520329 FMI 31: The condition behind the DEF flow quantity fault exists and is activeReal conditionDetroit DD15, Detroit DD13, Detroit DD13 Gen 5, Detroit DD15 Gen 5
Checks
0 of 5 done
When to stop
Repeated aftertreatment faults lead to an engine derate. Parked regenerations and dosing tests are run with the service tool; do not remove or bypass DPF or SCR parts.
How urgent SPN 520329 is depends on its FMI and whether the engine has derated. Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Causes
- Clogged DEF suction filter
- Crystallised dosing nozzle
- Worn DEF pump
- Air or frozen DEF in the line
Other Aftertreatment - SCR/DEF codes
Source
Detroit Diesel DD15 2017-2020 fault codes list (Diesel Laptops)
This list names SPN 520329 and the FMIs above for the engines it covers. The guidance on this page is general, not taken from it.
The source covers: Detroit DD13, Detroit DD15; same SPN on other J1939 engines.
Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
