J1939 · Aftertreatment - DPF
SPN 5018 Fault Code
Aftertreatment 1 diesel oxidation catalyst face plugged
What does SPN 5018 mean?
A detection that the DOC front face is blocked, usually by soot, oil or fuel deposits, seen as a pressure or temperature anomaly. It is used to flag a restricted catalyst. How urgent it is depends on the FMI after SPN 5018 - pick it below. Check first: inspect the DOC face for soot and oil build-up.
- SPN 5018
- Aftertreatment 1 diesel oxidation catalyst face plugged
- FMI ?
- How it failed - the number after the SPN
Can I keep running with it?
Depends on the FMI
How urgent it is depends on the FMI after SPN 5018 - pick it below.
What should I check first?
Inspect the DOC face for soot and oil build-up
Then 4 more checksWhere to read it
Connect a J1939-capable scan tool to the 9-pin diagnostic port.
Which FMI shows after SPN 5018?
You'll notice: The face of the diesel oxidation catalyst is plugged, so exhaust flow and heat generation are poor.
Find the number shown after SPN 5018 on your display.
- 11SPN 5018 FMI 11: A fault exists but the ECM cannot identify its causeOtherCummins ISX15
- 18SPN 5018 FMI 18: The DOC efficiency check failedReal conditionDetroit DD15, Detroit DD13, Detroit DD13 Gen 5, Detroit DD15 Gen 5
Checks
0 of 5 done
When to stop
Repeated aftertreatment faults lead to an engine derate. Parked regenerations and dosing tests are run with the service tool; do not remove or bypass DPF or SCR parts.
How urgent SPN 5018 is depends on its FMI and whether the engine has derated. Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Causes
- DOC face blocked with soot, oil or fuel residue
- Excess unburnt fuel or oil reaching the DOC from an injector, doser or turbo seal leak
- Temperature or pressure sensor fault giving a false plugged reading
- DOC damaged or contaminated by coolant after a head gasket or EGR cooler leak
Other Aftertreatment - DPF codes
- SPN 5298Diesel oxidation catalyst conversion efficiency
- SPN 4796Diesel oxidation catalyst missing
- SPN 81DPF intake pressure
- SPN 3242DPF intake temperature sensor
- SPN 3245DPF outlet temperature
- SPN 3246DPF outlet temperature sensor
- SPN 3249DPF intake temperature
- SPN 3250Diesel oxidation catalyst outlet temperature
Source
Cummins ISX15 2013-2018 fault codes list (Diesel Laptops)
This list names SPN 5018 and the FMIs above for the engines it covers. The guidance on this page is general, not taken from it.
The source covers: Cummins ISX15 (2013-2018) and X15; same SPN on other J1939 engines.
Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
