EF Logo

J1939 · Aftertreatment - SCR/DEF

SPN 4346 Fault Code

DEF line heater 4

What does SPN 4346 mean?

Electric heater on the fourth heated DEF hose in the line set, switched by the aftertreatment control module in cold weather. How urgent it is depends on the FMI after SPN 4346 - pick it below. Check first: measure resistance across the heater pins and compare it with the figure for that line in the manual.

FaultActiveSPN 4346FMI --J1939 engine ECU
SPN 4346
DEF line heater 4
FMI ?
How it failed - the number after the SPN

Can I keep running with it?

Depends on the FMI

How urgent it is depends on the FMI after SPN 4346 - pick it below.

What should I check first?

Measure resistance across the heater pins and compare it with the figure for that line in the manual

Then 4 more checks
Plug the service tool in hereDiagnosticport, 9-pin

Where to read it

Connect a J1939-capable scan tool to the 9-pin diagnostic port.

Which FMI shows after SPN 4346?

You'll notice: A cold-weather fault: that hose may stay frozen, dosing stops and an SCR efficiency warning can appear after the engine has run a while.

Find the number shown after SPN 4346 on your display.

  • 3SPN 4346 FMI 3: DEF line heater 4 signal voltage is above normal, or the circuit is shorted to a high sourceShorted highCummins ISX15
  • 5SPN 4346 FMI 5: Current in the DEF line heater 4 circuit is below normal, or the circuit is openOpen circuitCummins ISX15
  • 19SPN 4346 FMI 19: Network data received for the DEF line heater 4 is in errorLost messagePACCAR MX-13

Checks

0 of 5 done

When to stop

Repeated aftertreatment faults lead to an engine derate. Parked regenerations and dosing tests are run with the service tool; do not remove or bypass DPF or SCR parts.

How urgent SPN 4346 is depends on its FMI and whether the engine has derated. Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Causes

  • Cracked heater lead at a hose bend where it flexes with engine movement
  • Open element in the fourth heater segment
  • Loose or backed-out pin in the heater connector
  • Shared heater feed fuse blown, taking out several line heaters

Source

Cummins ISX15 2010-2012 fault code list (Diesel Laptops)

This list names SPN 4346 and the FMIs above for the engines it covers. The guidance on this page is general, not taken from it.

The source covers: Cummins ISX15, PACCAR MX-13; same SPN on other J1939 engines.

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.