EF Logo

J1939 · Aftertreatment - DPF

SPN 3936 Fault Code

Aftertreatment 1 diesel particulate filter system

What does SPN 3936 mean?

An overall check of DPF system health: whether the filter is trapping, regenerating and flowing as expected. The ECM uses it to raise high-level DPF warnings. How urgent it is depends on the FMI after SPN 3936 - pick it below. Check first: read the soot load, ash load and differential pressure in the service tool.

FaultActiveSPN 3936FMI --J1939 engine ECU
SPN 3936
Aftertreatment 1 diesel particulate filter system
FMI ?
How it failed - the number after the SPN

Can I keep running with it?

Depends on the FMI

How urgent it is depends on the FMI after SPN 3936 - pick it below.

What should I check first?

Read the soot load, ash load and differential pressure in the service tool

Then 4 more checks
Plug the service tool in hereDiagnosticport, 9-pin

Where to read it

Connect a J1939-capable scan tool to the 9-pin diagnostic port.

Which FMI shows after SPN 3936?

You'll notice: The diesel particulate filter system is not working as expected, so the ECM sets a DPF fault.

Find the number shown after SPN 3936 on your display.

  • 0SPN 3936 FMI 0: Value is above the normal range, most severe levelReal conditionMack MP8, Mack MP7, Volvo D13
  • 1SPN 3936 FMI 1: Value is below the normal range, most severe levelReal conditionMack MP8, Mack MP7, Volvo D13
  • 2SPN 3936 FMI 2: Data is erratic, intermittent or incorrectErratic or implausibleCummins ISX15
  • 7SPN 3936 FMI 7: The mechanical part is not responding or is out of adjustmentPart or controllerCummins ISX15
  • 14SPN 3936 FMI 14: A special-instruction condition defined by the engine maker appliesOtherCummins ISX15
  • 15SPN 3936 FMI 15: Value is above the normal range, least severe levelReal conditionCummins ISX15
  • 16SPN 3936 FMI 16: Value is above the normal range, moderately severe levelReal conditionCummins ISX15
  • 18SPN 3936 FMI 18: DPF pressure or filtration efficiency is low, or soot level is low or mediumReal conditionDetroit DD15, Detroit DD13, Detroit DD13 Gen 5, Detroit DD15 Gen 5 and 1 more

Checks

0 of 5 done

When to stop

Repeated aftertreatment faults lead to an engine derate. Parked regenerations and dosing tests are run with the service tool; do not remove or bypass DPF or SCR parts.

How urgent SPN 3936 is depends on its FMI and whether the engine has derated. Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Causes

  • Filter plugged with soot or ash and not clearing on regeneration
  • Filter cracked or damaged, so efficiency is low
  • Pressure or temperature sensor fault giving a false filter reading
  • Regeneration blocked by a fault elsewhere in the aftertreatment system

Source

Cummins ISX15 2013-2018 fault codes list (Diesel Laptops)

This list names SPN 3936 and the FMIs above for the engines it covers. The guidance on this page is general, not taken from it.

The source covers: Cummins ISX15 (2013-2018) and X15; same SPN on other J1939 engines.

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.