J1939 · Aftertreatment - DPF
SPN 3711 Fault Code
DPF regeneration blocked by low exhaust temperature
What does SPN 3711 mean?
A regeneration request that is being held back because exhaust temperature is too low to start it safely. How urgent it is depends on the FMI after SPN 3711 - pick it below. Check first: run the engine under load so the exhaust warms, then request the regeneration again.
- SPN 3711
- DPF regeneration blocked by low exhaust temperature
- FMI ?
- How it failed - the number after the SPN
Can I keep running with it?
Depends on the FMI
How urgent it is depends on the FMI after SPN 3711 - pick it below.
What should I check first?
Run the engine under load so the exhaust warms, then request the regeneration again
Then 4 more checksWhere to read it
Connect a J1939-capable scan tool to the 9-pin diagnostic port.
Which FMI shows after SPN 3711?
You'll notice: Active regeneration will not start, so soot is not burned off and the DPF lamp may come on.
Find the number shown after SPN 3711 on your display.
- 31SPN 3711 FMI 31: The condition behind the DPF regeneration blocked by low exhaust temperature fault exists and is activeReal conditionCummins ISX15, Detroit DD15, Detroit DD13, Detroit DD13 Gen 5 and 1 more
Checks
0 of 5 done
When to stop
Repeated aftertreatment faults lead to an engine derate. Parked regenerations and dosing tests are run with the service tool; do not remove or bypass DPF or SCR parts.
How urgent SPN 3711 is depends on its FMI and whether the engine has derated. Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Causes
- Engine running at idle or light load so the exhaust stays cool
- Exhaust temperature sensor reading low
- Doser or air problem keeping temperature down
- Cold ambient
Other Aftertreatment - DPF codes
- SPN 3703DPF regeneration blocked by inhibit
- SPN 3716DPF high-idle regeneration coolant temperature
- SPN 81DPF intake pressure
- SPN 3242DPF intake temperature sensor
- SPN 3245DPF outlet temperature
- SPN 3246DPF outlet temperature sensor
- SPN 3249DPF intake temperature
- SPN 3250Diesel oxidation catalyst outlet temperature
Source
Cummins ISX15 2010-2012 fault code list (Diesel Laptops)
This list names SPN 3711 and the FMIs above for the engines it covers. The guidance on this page is general, not taken from it.
The source covers: Cummins ISX15, Detroit DD13, Detroit DD15; same SPN on other J1939 engines.
Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
