J1939 · Aftertreatment - DPF
SPN 3251 FMI 2
DPF differential pressure erratic
What does SPN 3251 FMI 2 mean?
The DPF differential pressure sensor data jumps around or disagrees with related readings, so the ECM flags it erratic. Urgency: check soon - the machine may derate or limit a function. Check first: log the DPF differential pressure sensor reading over a short run; spikes or dropouts with no change in the machine point to wiring or the sensor.
- FMI 2
- Erratic or incorrect data
Can I keep running with it?
Check soon
The machine may derate or limit a function. Find the cause before the next shift.
What should I check first?
Log the DPF differential pressure sensor reading over a short run; spikes or dropouts with no change in the machine point to wiring or the sensor
Then 4 more checksWhere to read it
Connect a J1939-capable scan tool to the 9-pin diagnostic port.
Checks
0 of 5 done
Causes
- Terminal fretting inside the DPF differential pressure sensor plug breaking contact intermittently
- Broken inner strands in the DPF differential pressure sensor wire, which open and close as the harness flexes
- Soot or condensate in a pressure hose making the reading pulse
- Hose fitting loose and moving with the exhaust pulses
How it failed
You'll notice: The ECM cannot read soot load, so regeneration timing is wrong and the filter can load up, with the DPF lamp on and power cut back when pressure readings are false.
Erratic or implausibleRead from FMI 2: erratic or incorrect data
The reading jumps, drifts or disagrees with the sensors around it.
- Meter test
- Watch the live value on the service tool while you flex the harness and tap the connector.
- Good result
- A steady value that tracks the real condition. A jump while flexing is the loose pin or wire.
When to stop
Repeated aftertreatment faults lead to an engine derate. Parked regenerations and dosing tests are run with the service tool; do not remove or bypass DPF or SCR parts.
Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Other SPN 3251 codes
- SPN 3251Aftertreatment 1 diesel particulate filter differential pressure - every FMI
- SPN 3251 FMI 0DPF differential pressure high, most severe
- SPN 3251 FMI 3DPF differential pressure sensor voltage high
- SPN 3251 FMI 4DPF differential pressure sensor voltage low
- SPN 3251 FMI 10DPF differential pressure abnormal rate of change
- SPN 3251 FMI 16DPF differential pressure high, moderately severe
- SPN 3251 FMI 21DOC inlet/outlet pressure implausible
Source
Cummins ISX15 2013-2018 fault codes list (Diesel Laptops)
This list shows SPN 3251 with FMI 2. The guidance on this page is general, not taken from it.
Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
