J1939 · Aftertreatment - DPF
SPN 3251 FMI 0
DPF differential pressure high, most severe
What does SPN 3251 FMI 0 mean?
The pressure drop across the DPF is far above the limit, the most severe level. The filter is badly plugged with soot or ash and the engine will derate until it is cleaned. Urgency: stop now - shut down and fix before working on. Check first: read soot load, ash load and differential pressure against engine speed in the service tool.
- FMI 0
- Data above normal, most severe
Can I keep running with it?
Stop now
Shut down and fix before working on. Running on risks damage or the machine locks out.
What should I check first?
Read soot load, ash load and differential pressure against engine speed in the service tool
Then 4 more checksWhere to read it
Connect a J1939-capable scan tool to the 9-pin diagnostic port.
Checks
0 of 5 done
Causes
- Filter plugged with soot or ash after failed or skipped regenerations
- Doser or injector fault so regeneration never reached temperature
- Delta-P hose or sensor fault giving a false high reading
- Exhaust restriction after the filter, such as a crushed pipe or silencer
How it failed
You'll notice: The pressure drop across the DPF is far above the limit, the most severe level.
Real conditionRead from FMI 0: data above normal, most severe
The sensor reading is valid but outside the allowed range - the problem may be real.
- Meter test
- Check the real value with a separate gauge or thermometer before blaming the sensor.
- Good result
- If the gauge agrees with the display, fix the machine, not the sensor.
When to stop
Tilt, load and interlock cutouts are what keep a lift or telehandler from tipping. Never bypass or bridge one to keep working; get the fault found before anyone goes up or lifts again.
Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Other SPN 3251 codes
- SPN 3251Aftertreatment 1 diesel particulate filter differential pressure - every FMI
- SPN 3251 FMI 2DPF differential pressure erratic
- SPN 3251 FMI 3DPF differential pressure sensor voltage high
- SPN 3251 FMI 4DPF differential pressure sensor voltage low
- SPN 3251 FMI 10DPF differential pressure abnormal rate of change
- SPN 3251 FMI 16DPF differential pressure high, moderately severe
- SPN 3251 FMI 21DOC inlet/outlet pressure implausible
Source
Cummins ISX15 2013-2018 fault codes list (Diesel Laptops)
This list shows SPN 3251 with FMI 0. The guidance on this page is general, not taken from it.
Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
