EF Logo

J1939 · Aftertreatment - DPF

SPN 3245 Fault Code

DPF outlet temperature

What does SPN 3245 mean?

Exhaust temperature after the DPF, used to control regeneration and protect the filter from overheating. How urgent it is depends on the FMI after SPN 3245 - pick it below. Check first: read the sensor and compare it with ambient on a cold engine; they should be close.

FaultActiveSPN 3245FMI --J1939 engine ECU
SPN 3245
DPF outlet temperature
FMI ?
How it failed - the number after the SPN

Can I keep running with it?

Depends on the FMI

How urgent it is depends on the FMI after SPN 3245 - pick it below.

What should I check first?

Read the sensor and compare it with ambient on a cold engine; they should be close

Then 4 more checks
Plug the service tool in hereDiagnosticport, 9-pin

Where to read it

Connect a J1939-capable scan tool to the 9-pin diagnostic port.

Which FMI shows after SPN 3245?

You'll notice: The controller may reduce regeneration or derate to protect the DPF.

Find the number shown after SPN 3245 on your display.

  • 0SPN 3245 FMI 0: DPF outlet temperature is above the normal range, most severe levelReal conditionMack MP8, Mack MP7, Volvo D13
  • 2SPN 3245 FMI 2: DPF outlet temperature data is erratic, intermittent or incorrectErratic or implausibleMack MP8, Mack MP7, Volvo D13
  • 4SPN 3245 FMI 4: DPF outlet temperature signal voltage is below normal, or the circuit is shorted to a low sourceShorted lowMack MP8, Mack MP7, Volvo D13
  • 5SPN 3245 FMI 5: Current in the DPF outlet temperature circuit is below normal, or the circuit is openOpen circuitMack MP8, Mack MP7, Volvo D13
  • 15SPN 3245 FMI 15: DPF outlet temperature is above the normal range, least severe levelReal conditionMack MP8, Mack MP7, Volvo D13

Checks

0 of 5 done

When to stop

Repeated aftertreatment faults lead to an engine derate. Parked regenerations and dosing tests are run with the service tool; do not remove or bypass DPF or SCR parts.

How urgent SPN 3245 is depends on its FMI and whether the engine has derated. Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Causes

  • Sensor failed or its wiring damaged
  • Sensor lead cooked against the DPF shell
  • Sensor tip fouled
  • Real overheating of the DPF

Source

Mack MP8 2010-2013 fault code list (Diesel Laptops)

This list names SPN 3245 and the FMIs above for the engines it covers. The guidance on this page is general, not taken from it.

The source covers: Mack MP7, Mack MP8, Volvo D13; same SPN on other J1939 engines.

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.