J1939 · Aftertreatment - SCR/DEF
SPN 3057 Fault Code
SCR outlet NOx sensor
What does SPN 3057 mean?
NOx sensor downstream of the SCR catalyst. It tells the control module how much NOx got through, which is how SCR efficiency is judged. How urgent it is depends on the FMI after SPN 3057 - pick it below. Check first: compare outlet NOx with inlet NOx at a steady load; outlet higher than inlet means a bad sensor or a failed catalyst.
- SPN 3057
- SCR outlet NOx sensor
- FMI ?
- How it failed - the number after the SPN
Can I keep running with it?
Depends on the FMI
How urgent it is depends on the FMI after SPN 3057 - pick it below.
What should I check first?
Compare outlet NOx with inlet NOx at a steady load; outlet higher than inlet means a bad sensor or a failed catalyst
Then 4 more checksWhere to read it
Connect a J1939-capable scan tool to the 9-pin diagnostic port.
Which FMI shows after SPN 3057?
You'll notice: SCR efficiency cannot be proven, so efficiency codes can follow and, left alone, an inducement derate.
Find the number shown after SPN 3057 on your display.
- 2SPN 3057 FMI 2: SCR outlet NOx sensor data is erratic, intermittent or incorrectErratic or implausibleDetroit DD15, Detroit DD13, Detroit DD13 Gen 5, Detroit DD15 Gen 5
Checks
0 of 5 done
When to stop
Repeated aftertreatment faults lead to an engine derate. Parked regenerations and dosing tests are run with the service tool; do not remove or bypass DPF or SCR parts.
How urgent SPN 3057 is depends on its FMI and whether the engine has derated. Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Causes
- Aged outlet sensor probe reading high or stuck
- Ammonia slip fouling the sensor probe
- Sensor connector filled with water
- Real catalyst failure that makes the outlet NOx truly high
Other Aftertreatment - SCR/DEF codes
Source
Detroit Diesel DD15 2017-2020 fault codes list (Diesel Laptops)
This list names SPN 3057 and the FMIs above for the engines it covers. The guidance on this page is general, not taken from it.
The source covers: Detroit DD13, Detroit DD15; same SPN on other J1939 engines.
Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
