EF Logo

J1939 · Turbo

SPN 2795 Fault Code

VTG turbocharger actuator position

What does SPN 2795 mean?

Position of the variable-geometry turbocharger vanes as set by the actuator. How urgent it is depends on the FMI after SPN 2795 - pick it below. Check first: command the actuator in the service tool and watch the vane position follow.

FaultActiveSPN 2795FMI --J1939 engine ECU
SPN 2795
VTG turbocharger actuator position
FMI ?
How it failed - the number after the SPN

Can I keep running with it?

Depends on the FMI

How urgent it is depends on the FMI after SPN 2795 - pick it below.

What should I check first?

Command the actuator in the service tool and watch the vane position follow

Then 4 more checks
Plug the service tool in hereDiagnosticport, 9-pin

Where to read it

Connect a J1939-capable scan tool to the 9-pin diagnostic port.

Which FMI shows after SPN 2795?

You'll notice: Boost control is off, so the engine may lose power, smoke or overboost.

Find the number shown after SPN 2795 on your display.

  • 1SPN 2795 FMI 1: VTG turbocharger actuator position is below the normal range, most severe levelReal conditionPACCAR MX-13
  • 2SPN 2795 FMI 2: VTG turbocharger actuator position data is erratic, intermittent or incorrectErratic or implausiblePACCAR MX-13
  • 7SPN 2795 FMI 7: The VTG turbocharger actuator position is not responding or is out of adjustmentPart or controllerPACCAR MX-13
  • 19SPN 2795 FMI 19: Network data received for the VTG turbocharger actuator position is in errorLost messagePACCAR MX-13

Checks

0 of 5 done

When to stop

Most sensor and wiring faults can be traced with a multimeter and the wiring diagram. Disconnect the battery before unplugging controllers; if the controller itself is suspect or needs programming, that needs the dealer’s service tool.

How urgent SPN 2795 is depends on its FMI and whether the engine has derated. Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Causes

  • Vanes sticking with soot
  • Actuator linkage worn
  • Actuator motor failed
  • Data link fault

Source

PACCAR MX-13 2013-2016 fault codes list (Diesel Laptops)

This list names SPN 2795 and the FMIs above for the engines it covers. The guidance on this page is general, not taken from it.

The source covers: PACCAR MX-13; same SPN on other J1939 engines.

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.