Cummins · Engine protection - SPN 1569 FMI 15
Cummins Fault Code 6255
Engine protection torque derate - least severe level
What does Cummins code 6255 mean?
The ECM has started the first, mildest step of a torque derate. It is the early warning of a problem that will get worse if it is left, and the real fault is stored under another code. Urgency: check soon - the machine may derate or limit a function. Check first: read all active codes with INSITE and look for the one with the earliest time stamp.
Can I keep running with it?
Check soon
The machine may derate or limit a function. Find the cause before the next shift.
What should I check first?
Read all active codes with INSITE and look for the one with the earliest time stamp
Then 4 more checksWhere to read it
Connect INSITE or another J1939-capable scan tool to the 9-pin diagnostic port.
Checks
0 of 5 done
Causes
- Early stage of a coolant temperature, oil pressure, boost or fuel rail problem
- Aftertreatment fault, for example a SCR or DEF warning, that has started a gradual derate
- Low DEF or DEF quality problem in its first inducement stage
- Sensor fault reading wrongly and tripping the protection logic
How it failed
You'll notice: A small loss of power under load with the amber lamp on.
OtherRead from how the source describes the code
The source does not say how this one failed.
- Meter test
- Read the code with the service tool and note which other codes are active with it.
- Good result
- Codes that appear together usually share one cause - start with the wiring they share.
When to stop
Tilt, load and interlock cutouts are what keep a lift or telehandler from tipping. Never bypass or bridge one to keep working; get the fault found before anyone goes up or lifts again.
Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Same part, other failures: Engine protection derate and SCR operator inducement
- 3712SCR operator inducement - most severe (DEF related shutdown/derate)OtherStop now
- 3714Engine protection torque derate - most severe conditionOtherCheck soon
- 6254SCR operator inducement - moderate severityOtherCheck soon
- 6255Engine protection torque derate - least severe levelOtherCheck soon
Related on Equipments Finder
Source
Cummins ISX15 (2013-2018) Fault Codes List (Diesel Repair)
This source lists 6255 and its meaning. The guidance on this page is general, not taken from it.
The source covers: Cummins ISX15/X15/ISB6.7/B6.7/L9 engines (J1939 SPN 1569, FMI 15); same code list used in trucks, buses and machines with these engines.
Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
