Cummins · Aftertreatment - SPN 4334 FMI 2
Cummins Fault Code 3596
DEF pressure sensor data erratic or implausible
What does Cummins code 3596 mean?
The ECM does not trust the DEF pressure sensor reading because it drifts, jumps or disagrees with other sensors. The circuit tests inside limits, so the fault is usually intermittent or the sensor is out of step with reality. Urgency: check soon - the machine may derate or limit a function. Check first: run the DEF system test and watch the pressure curve for swings.
Can I keep running with it?
Check soon
The machine may derate or limit a function. Find the cause before the next shift.
What should I check first?
Run the DEF system test and watch the pressure curve for swings
Then 4 more checksWhere to read it
Connect INSITE or another J1939-capable scan tool to the 9-pin diagnostic port.
Checks
0 of 5 done
Causes
- DEF pump head pressure sensor drifting inside the pump
- Air in the DEF line giving erratic pressure
- Dosing nozzle partly blocked by crystals making pressure swing
- DEF filter restricted
How it failed
You'll notice: The DEF dosing system cannot confirm line pressure, which can stop dosing and lead to a SCR derate.
Erratic or implausibleRead from how the source describes the code
The reading jumps, drifts or disagrees with the sensors around it.
- Meter test
- Watch the live value on the service tool while you flex the harness and tap the connector.
- Good result
- A steady value that tracks the real condition. A jump while flexing is the loose pin or wire.
When to stop
Repeated aftertreatment faults lead to an engine derate. Parked regenerations and dosing tests are run with the service tool; do not remove or bypass DPF or SCR parts.
Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Same part, other failures: DEF quality and DEF pressure
3 other codes on this part are also erratic or implausible (3868, 3878, 4277). When they show together, start at the wiring and connector they share.
- 3571DEF pressure sensor signal voltage highShorted highCheck soon
- 3572DEF pressure sensor signal voltage lowShorted lowCheck soon
- 3574DEF pressure too low - moderately severeReal conditionCheck soon
- 3575DEF pressure - above normal - moderately severeReal conditionCheck soon
- 3596DEF pressure sensor data erratic or implausibleErratic or implausibleCheck soon
- 3866DEF quality - below normal - most severeReal conditionCheck soon
- 3867DEF quality below normal - moderately severeReal conditionCheck soon
- 3868DEF quality - abnormal update rateErratic or implausibleCheck soon
- 3878DEF quality - data erratic or incorrectErratic or implausibleCheck soon
Show the other 14 codesHide the other codes
- 1685DEF quality sensor circuit - voltage lowShorted lowCheck soon
- 1686DEF quality sensor circuit - voltage highShorted highCheck soon
- 1714DEF quality out of calibrationPart or controllerCheck soon
- 1715DEF quality - root cause not knownOtherInformation
- 3543NOx limit exceeded - insufficient DEF qualityShorted highCheck soon
- 4277DEF quality - abnormal update rateErratic or implausibleCheck soon
- 4768DEF property - root cause not knownOtherInformation
- 4842DEF quality - above normal - least severeReal conditionInformation
- 5935DEF pressure - mechanical fault or not respondingPart or controllerCheck soon
- 5936DEF pressure - above normal - least severeReal conditionInformation
- 6245NOx limits exceeded due to insufficient reagent quality - condition existsReal conditionInformation
- 6765DEF property - above normal - moderately severeReal conditionCheck soon
- 6766DEF property - below normal - moderately severeReal conditionCheck soon
- 6767DEF property - condition existsOtherInformation
Related on Equipments Finder
Source
Cummins ISX15 (2013-2018) Fault Codes List (Diesel Repair)
This source lists 3596 and its meaning. The guidance on this page is general, not taken from it.
The source covers: Cummins ISX15/X15/ISB6.7/B6.7/L9 engines (J1939 SPN 4334, FMI 2); same code list used in trucks, buses and machines with these engines.
Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
