EF Logo

Cummins · Air handling - SPN 412 FMI 15

Cummins Fault Code 2961

EGR temperature high - least severe

What does Cummins code 2961 mean?

The EGR gas temperature after the cooler is above the first limit. The cooler is not removing as much heat as expected. Urgency: check soon - the machine may derate or limit a function. Check first: check the coolant level and for air in the system.

FaultCheck2961Cummins · Air handling - SPN 412 FMI 15

Can I keep running with it?

Check soon

The machine may derate or limit a function. Find the cause before the next shift.

What should I check first?

Check the coolant level and for air in the system

Then 4 more checks
Plug the service tool in hereDiagnosticport, 9-pin

Where to read it

Connect INSITE or another J1939-capable scan tool to the 9-pin diagnostic port.

Checks

0 of 5 done

Causes

  • EGR cooler fouled with soot inside
  • Low coolant flow through the EGR cooler
  • Coolant level low or air trapped
  • EGR temperature sensor reading high

How it failed

You'll notice: Possible amber lamp, a slight power loss and more smoke under load.

OtherRead from how the source describes the code

The source does not say how this one failed.

Meter test
Read the code with the service tool and note which other codes are active with it.
Good result
Codes that appear together usually share one cause - start with the wiring they share.

When to stop

Repeated aftertreatment faults lead to an engine derate. Parked regenerations and dosing tests are run with the service tool; do not remove or bypass DPF or SCR parts.

Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Same part, other failures: EGR sensors and ECM temperature

Source

Cummins ISX15 (2013-2018) Fault Codes List (Diesel Repair)

This source lists 2961 and its meaning. The guidance on this page is general, not taken from it.

The source covers: Cummins ISX15/X15/ISB6.7/B6.7/L9 engines (J1939 SPN 412, FMI 15); same code list used in trucks, buses and machines with these engines.

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.