EF Logo

Bobcat · Filters

Bobcat Fault Code M0117

Air filter plugged

What does Bobcat code M0117 mean?

The air filter restriction switch is telling the controller the intake is clogged. Left alone it leads to smoke, power loss and a derate (see M0144, M0145). Urgency: check soon - the machine may derate or limit a function. Check first: clean the dust ejector and pre-cleaner so they can pass dirt out of the housing.

FaultCheckM0117Bobcat · Filters

Can I keep running with it?

Check soon

The machine may derate or limit a function. Find the cause before the next shift.

What should I check first?

Clean the dust ejector and pre-cleaner so they can pass dirt out of the housing

Then 3 more checks
Code shows hereFAULTM0117

Where this code shows

On touchscreen R-series machines, touch the screen and pick Service Codes from the menu.

Checks

0 of 4 done

Causes

  • Switch stuck in the closed position
  • Wrong or poor quality filter fitted
  • Pre-cleaner or dust ejector blocked
  • Intake hose collapsed or clamp crushed

How it failed

You'll notice: The controller says the air filter is restricted.

Real conditionRead from how the source describes the code

The sensor reading is valid but outside the allowed range - the problem may be real.

allowed rangetime
The reading against the band the controller allows.
Meter test
Check the real value with a separate gauge or thermometer before blaming the sensor.
Good result
If the gauge agrees with the display, fix the machine, not the sensor.

When to stop

Most sensor and wiring faults can be traced with a multimeter and the wiring diagram. Disconnect the battery before unplugging controllers; if the controller itself is suspect or needs programming, that needs the dealer’s service tool.

Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Same part, other failures: Air, hydraulic and fuel filters

7 other codes on this part are also real condition (01-17, M0144, M0145, H9144 and more). When they show together, start at the wiring and connector they share.

Show the other 16 codes
All 25 Air, hydraulic and fuel filters codes on one page

Source

Bobcat Service Code List (rev. 10-20, M-Series/R-Series loaders and M-Series excavators)

This source lists M0117 and its meaning. The guidance on this page is general, not taken from it.

The source covers: M-Series loaders S450-S850 and T450-T870.

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.