EF Logo

Bobcat · Filters

Bobcat Fault Code 01‑17

Air filter plugged

What does Bobcat code 01-17 mean?

The air filter restriction switch says the filter is clogged. Left alone it leads to smoke and loss of power from the starved engine. Urgency: check soon - the machine may derate or limit a function. Check first: check that the replacement element is the correct part number and sits fully in its seal.

FaultCheck01-17Bobcat · Filters

Can I keep running with it?

Check soon

The machine may derate or limit a function. Find the cause before the next shift.

What should I check first?

Check that the replacement element is the correct part number and sits fully in its seal

Then 3 more checks
Code shows hereFAULT01-17

Where this code shows

On touchscreen R-series machines, touch the screen and pick Service Codes from the menu.

Checks

0 of 4 done

Causes

  • Switch stuck in the closed position
  • Pre-cleaner or dust ejector blocked
  • Primary filter element loaded with dust
  • Intake hose collapsed or clamp crushed

How it failed

You'll notice: The air filter restriction warning is on, meaning the intake is partly blocked.

Real conditionRead from how the source describes the code

The sensor reading is valid but outside the allowed range - the problem may be real.

allowed rangetime
The reading against the band the controller allows.
Meter test
Check the real value with a separate gauge or thermometer before blaming the sensor.
Good result
If the gauge agrees with the display, fix the machine, not the sensor.

When to stop

Most sensor and wiring faults can be traced with a multimeter and the wiring diagram. Disconnect the battery before unplugging controllers; if the controller itself is suspect or needs programming, that needs the dealer’s service tool.

Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Same part, other failures: Air, hydraulic and fuel filters

7 other codes on this part are also real condition (M0117, M0144, M0145, H9144 and more). When they show together, start at the wiring and connector they share.

Show the other 16 codes
All 25 Air, hydraulic and fuel filters codes on one page

Source

Bobcat S205 Operation & Maintenance Manual, service codes list

This source lists 01-17 and its meaning. The guidance on this page is general, not taken from it.

The source covers: Older Bobcat skid-steer and track loaders using the two-digit service codes (S205 manual, similar models).

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.