EF Logo

motor gradermade by KomatsuUAE, Global

Komatsu GD655-7Specs, weight and dimensions

Weight
19.7 t
19,730 kg
Horsepower
218 hp
163 kW
Est. new price
~AED 1.54M

Quick answer

The Komatsu GD655-7 is a 19.7-tonne motor grader with a Komatsu SAA6D107E-3 engine rated at 163 kW (218 hp). It travels at up to 44.3 km/h. It suits levelling road bases, cutting slopes and ditches and spreading and grading material. Its rivals include the Cat 140 (18.7 t) and the Cat 160 (19.7 t).

Komatsu GD655-7 (illustration)

How much does a Komatsu GD655-7 weigh?

The Komatsu GD655-7 weighs 19.7 tonnes (19,730 kg, 43,498 lb) in working order, with fuel, operator and standard attachment. That is 5% heavier than the Cat 140 (18.7 t). The figures are from Komatsu GD655-7 Tier 4 Final brochure, Australia and New Zealand specifications. Options and attachments change the figure, so check the plate of the machine in front of you.

What engine is in the Komatsu GD655-7?

The Komatsu GD655-7 has a Komatsu SAA6D107E-3 engine rated at 163 kW (218 hp) net, gears 7-8, at 2,100 rpm (SAE J1349). It displaces 6.7 L (408 in3) and makes 941 Nm (694 lb-ft) of torque. Emissions: U.S. EPA Tier 4 Final / EU Stage 4. The fuel tank holds 390 L (103 gal) and the engine takes 23 L (6.1 gal) of oil.

How wide is the Komatsu GD655-7's moldboard?

The Komatsu GD655-7 travels at up to 44.3 km/h. In imperial units the blade width is 14 ft 2 in. The sheet notes: standard moldboard; the sheet lists its dimensions as 4,230 x 660 x 25 mm under Moldboard; 3,710 mm optional. On the same row of their sheets, the Cat 140 shows 3.7 m and the Cat 160 shows 3.7 m.

What are the Komatsu GD655-7 dimensions?

The Komatsu GD655-7 is 10.88 m (35 ft 8 in) long, 2.68 m (8 ft 10 in) wide and 3.20 m (10 ft 6 in) high. As it stands it is too big for the door of a standard shipping container. The Cat 140 is 10.30 m long, 2.52 m wide and 3.45 m high.

Komatsu GD655-7 vs Cat 140: what is the difference?

The Komatsu GD655-7 is 5% heavier than the Cat 140: 19.7 t against 18.7 t. The Komatsu GD655-7 carries more fuel (390 L against 371 L) and turns tighter (7.4 m against 7.5 m). The Cat 140 has more torque (1,070 Nm against 941 Nm), is faster (48.3 km/h against 44.3 km/h) and is narrower to transport (2.521 m against 2.68 m).

Komatsu GD655-7 dimensions

Komatsu GD655-7, side view with dimensions (illustration)3.2 m10.9 m
Side view
Komatsu GD655-7, front view (illustration)2.68 m
Front view
Overall height
3.2 m
Overall length
10.9 m
Overall width
2.68 m

Illustration; figures from the maker's sheet.

How big is the Komatsu GD655-7?

Drawn to one scale from the maker’s dimension drawing, on one ground line.

Komatsu GD655-7 drawn to scale beside a person, a pickup truck and a 40 ft container. The Komatsu GD655-7 is 10.88 m long - 89% of a forty-foot container's length - and 3.2 m tall, 1.8 times a person's height.Komatsu GD655-710.88 × 3.2 mPerson1.75 m tallPickup truck5.3 × 1.8 m40 ft container12.19 × 2.59 m
The Komatsu GD655-7 is 10.88 m long - 89% of a forty-foot container's length - and 3.2 m tall, 1.8 times a person's height.

Komatsu GD655-7 specifications

Every figure is the maker's, with the document and page it came from. Sheet last updated 17 November 2026.

93 figures in 10 groups, each with its source

Dimensions

Dimensions, part 1 of 2
FigureValue (metric)Source
Overall length10.875 mwith rear ripper[1] p.18
Front tyre to rear bumper9.51 m[1] p.18
Centre of tandem to back of ripper3.065 mrear ripper, optional[1] p.18
Wheelbase (front axle to centre of tandem)6.495 m[1] p.18
Cutting edge to centre of front axle2.58 m[1] p.18
Tandem axle spacing1.525 m[1] p.18
Centre of front axle to pusher0.93 mpush plate, optional[1] p.18
Dimensions, part 2 of 2
FigureValue (metric)Source
Overall height (low-profile cab)3.2 m[1] p.18
Width over tyres2.68 m17.5R25 tyres[1] p.18
Tread (front)2.07 m[1] p.18
Tread (rear)2.06 m[1] p.18
Blade width4.32 mstandard moldboard; the sheet lists its dimensions as 4,230 x 660 x 25 mm under Moldboard; 3,710 mm optional[1] p.18
Ripper beam width2.305 moptional[1] p.18
Ground clearance at front axle pivot0.62 m[1] p.16

Weight

Weight
FigureValue (metric)Source
Operating weight19,730 kgwith rear ripper and front push plate, 17.5R25 tyres[1] p.17
Operating weight, front wheels5,722 kg[1] p.17
Operating weight, rear wheels14,008 kg[1] p.17

Engine

Engine, part 1 of 2
FigureValue (metric)Source
Engine modelKomatsu SAA6D107E-3[1] p.16
EmissionsU.S. EPA Tier 4 Final / EU Stage 4[1] p.16
AspirationTurbocharged, aftercooled, cooled EGR; water-cooled, 4-cycle, direct injection[1] p.16
Cylinders6[1] p.16
Bore107 mm[1] p.16
Stroke124 mm[1] p.16
Displacement6.7 L[1] p.16
Gross power165 kW (221 hp)gears 7-8, at 2,100 rpm[1] p.16
Net power163 kW (218 hp)gears 7-8, at 2,100 rpm (SAE J1349)[1] p.16
Engine, part 2 of 2
FigureValue (metric)Source
Net power, gears 4-6150 kW (200 hp)P-mode, at 2,000 rpm[1] p.16
Net power, gears 1-3135 kW (180 hp)P-mode; E-mode gears 1-6, at 2,000 rpm[1] p.16
Gross power, gears 4-6151 kW (203 hp)P-mode, at 2,000 rpm[1] p.16
Gross power, gears 1-3137 kW (183 hp)P-mode; E-mode gears 1-6, at 2,000 rpm[1] p.16
Max torque941 Nmat 1,450 rpm[1] p.16
Torque rise30%[1] p.16
Max fan speed1,450 rpm[1] p.16
Air cleaner2-stage, dry type[1] p.16
Electrical system24 V, 2 x 12 V 140 Ah batteries, 140 A alternator[1] p.19

Performance

Performance, part 1 of 2
FigureValue (metric)Source
Top speed44.3 km/hforward, 8th gear[1] p.16
Top speed, reverse40.3 km/h4th gear[1] p.16
Turning radius (minimum)7.4 m[1] p.16
Performance, part 2 of 2
FigureValue (metric)Source
Steering range, left/right49°[1] p.16
Articulation angle, left/right25°[1] p.18

Transmission

Transmission, part 1 of 2
FigureValue (metric)Source
TransmissionFull power shift with lock-up torque converter (integral free-wheeling stator); 8 forward / 4 reverse; auto shift with stall prevention[1] p.16
Forward gear 13.4 km/h[1] p.16
Forward gear 25 km/h[1] p.16
Forward gear 37 km/h[1] p.16
Forward gear 410.2 km/h[1] p.16
Forward gear 515.4 km/h[1] p.16
Forward gear 622.3 km/h[1] p.16
Transmission, part 2 of 2
FigureValue (metric)Source
Forward gear 730.6 km/h[1] p.16
Forward gear 844.3 km/h[1] p.16
Reverse gear 14.5 km/h[1] p.16
Reverse gear 29.2 km/h[1] p.16
Reverse gear 320.3 km/h[1] p.16
Reverse gear 440.3 km/h[1] p.16

Frame and axles

Frame and axles, part 1 of 2
FigureValue (metric)Source
Front axleSolid bar, welded steel sections[1] p.16
Front wheel lean angle, left/right16°[1] p.16
Front axle oscillation, total32°[1] p.16
Rear axleAlloy steel, heat-treated, full-floating, with lock/unlock differential[1] p.16
Tandem driveOscillating welded box section 520 x 202 mm; side walls 22 mm inner, 19 mm outer[1] p.16
Frame and axles, part 2 of 2
FigureValue (metric)Source
Tandem oscillation11 deg forward, 13 deg reverse[1] p.16
Front frame section300 x 300 mm; 16/32 mm side walls, 25 mm upper and lower[1] p.16
DrawbarA-shaped, 210 x 22 mm frame with replaceable drawbar ball[1] p.16
BrakesFoot-operated sealed oil disc brakes on the four tandem wheels; spring-applied, hydraulically released parking caliper[1] p.16

Hydraulics

Hydraulics
FigureValue (metric)Source
Pump flow200 L/minvariable displacement piston pump, load-sensing closed centre, at rated engine speed[1] p.17
Standby pressure34 bar3.4 MPa[1] p.17
Max pressure206 bar20.6 MPa[1] p.17

Moldboard and blade range

Moldboard and blade range, part 1 of 2
FigureValue (metric)Source
Moldboard height660 mm[1] p.17
Moldboard thickness25 mm[1] p.17
Arc radius432 mm[1] p.17
Cutting edge152 x 16 mm[1] p.17
Side edges156 x 16 x 456 mm, replaceable and reversible[1] p.17
Blade pull12,607 kgbase GVM with ripper (maximum GVM 14,697 kg)[1] p.17
Down pressure9,491 kgbase GVM with ripper (maximum GVM 11,066 kg)[1] p.17
Circle diameter (outside)1,530 mm[1] p.17
Circle rotation360°[1] p.17
Moldboard and blade range, part 2 of 2
FigureValue (metric)Source
Moldboard sideshift, right820 mm[1] p.17
Moldboard sideshift, left820 mm[1] p.17
Max shoulder reach outside rear tyres, right2,000 mmframe straight[1] p.17
Max shoulder reach outside rear tyres, left2,000 mmframe straight[1] p.17
Max lift above ground480 mm[1] p.17
Max depth of cut615 mm[1] p.17
Maximum blade position angle90°right or left[1] p.17
Blade tip range, forward40°[1] p.17
Blade tip range, backward5°[1] p.17

Ripper and scarifier

Ripper and scarifier, part 1 of 2
FigureValue (metric)Source
Ripping depth, maximum425 mm[1] p.17
Ripper shank holders5[1] p.17
Ripper shank holder spacing534 mm[1] p.17
Ripper penetration force9,390 kg[1] p.17
Ripper pryout force17,600 kg[1] p.17
Ripper and scarifier, part 2 of 2
FigureValue (metric)Source
Machine length increase, ripper beam raised690 mm[1] p.17
Rear scarifier working width2,186 mm[1] p.17
Rear scarifier depth, maximum165 mm[1] p.17
Rear scarifier shank holders9, at 267 mm spacing[1] p.17

Tyres

Tyres
FigureValue (metric)Source
Tyres17.5R25 tubeless radial on 14 in three-piece rims (optional 14.00-24 radial on 10 in three-piece rims)[1] p.16

Build: Komatsu GD655-7 (SAA6D107E-3, U.S. EPA Tier 4 Final / EU Stage 4, 4.3 m moldboard, 17.5R25 tyres, rear ripper and front push plate) from Komatsu's Australia and New Zealand specification sheet. Komatsu's US sheet describes a lighter build (14 ft moldboard, 13 in one-piece rims); differences are listed under conflicts.

  1. [1]Komatsu GD655-7 Tier 4 Final brochure, Australia and New Zealand specifications
  2. [2]Komatsu GD655-7 brochure, North American specifications (SMS Equipment)

Komatsu GD655-7 service

What each system holds and when Komatsu says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.

Service capacities

Fuel tank
390 L103 gal
DEF tank
37 L9.8 gal
Cooling system
30 L7.9 gal
Engine oil
23 L6.1 gal
Transmission
45 L11.9 gal
Final drive
17 L4.5 gal
Tandem housing, each
57 L15.1 gal
Hydraulic system
69 L18.2 gal
Circle reverse housing
7 L1.8 gal

Komatsu GD655-7 against its rivals

The motor graders nearest in weight from other makers, figure by figure, each shown at the same scale.

Komatsu GD655-7, Cat 140, Cat 160, Cat 12M: specifications side by side
FigureKomatsu GD655-7this pageCat 140 specsCat 160 specsCat 12M specs
Operating weight19,730 kg18,748 kg19,715 kg18,400 kg
Net power163 kW (218 hp)not on its sheet159 kW (213 hp)136 kW (183 hp)
Max torque941 Nm1,070 Nm1,237 Nm1,052 Nm
Pump flow200 L/minnot on its sheet210 L/min210 L/min
Fuel tank390 L371 L416 L416 L
Top speed44.3 km/h48.3 km/h47.4 km/h46.6 km/h
Turning radius (outside front tyres)7.4 m7.5 m7.6 m7.6 m
Width over tyres2.68 m2.521 m2.511 m2.511 m
Overall height (to top of cab)not on its sheet3.454 m3.308 m3.308 m
Every figureFull sheet

Underlined: the figure that leads its row. Weight has no better way, so it is never marked. All figures are the makers' own.

  • Pick the Komatsu GD655-7 if you need more power (163 kW) and a tighter turn (7.4 m).
  • Pick the Cat 140 if you need more speed (48.3 km/h).
  • Pick the Cat 160 if you need more torque (1,237 Nm).
  • Pick the Cat 12M if the lightest machine matters: at 18.4 t it weighs the least of the 4, and it leads no other figure here.

Komatsu GD655-7 prices and listings in the UAE

Asking prices on EquipmentsFinder, in AED, refreshed daily.

A new Komatsu GD655-7 costs about AED 1,540,000, base machine before options, freight and tax - an estimate from published estimates, checked November 2026. Sources: equipbook.ai.

No Komatsu GD655-7 is listed in the UAE on EquipmentsFinder right now. The prices below are for all motor graders, and a request reaches the suppliers who have one.

Typical hire, per daymedian of 8

AED 1,500 /day

No priced Komatsu GD655-7 for hire yet: this is all motor graders

Low AED 1,000High AED 1,600

No Komatsu GD655-7 for rent listed right now.

Request a Komatsu GD655-7

Who is asking for motor graders in the UAE

Contractors posted 9 requests for motor graders on the EquipmentsFinder Inquiry Board in the last 12 months. Most were for Abu Dhabi (6) and Dubai (3). Requests name a kind of machine, not a model, so this counts every motor grader, the Komatsu GD655-7 among them.

Requests, last 12 months
9
For Abu Dhabi
6
For Dubai
3
  • Motor Grader Required For rent URGENTLYAbu Dhabi / 19 November 2026
  • Motor Grader Required For RentDubai / 17 November 2026
  • Motor Grader Required For RentDubai / 16 November 2026

Open motor grader requests on the Inquiry BoardPost a request for a Komatsu GD655-7

Does a Komatsu GD655-7 fit in a shipping container?

The machine as it stands on the sheet. Your haulier or forwarder confirms the load.

No. As it stands on the sheet the Komatsu GD655-7 is 2.68 m wide against a 2.34 m door opening and 3.20 m high against a 2.28 m door of a standard container, so it ships on a flat rack, by RoRo or as break-bulk unless it is stripped down.

Length
10.88 m
Width
2.68 m
Height
3.2 m
Weight
19.7 t

Container figures: door opening 2.34 m wide by 2.28 m high, 5.9 m inside a 20 ft box and 12.03 m inside a 40 ft one (Hapag-Lloyd container specification). A size check only: payload is on each container's plate. Trailer class and road permits depend on the haulier and the route, so they are not given here.

Tools for a Komatsu GD655-7

For the people who run one: codes, charts and calculators that fit a motor grader.

Ranked: Motor graders by blade width

By blade width, widest-blade first. The Komatsu GD655-7 is 1 of 8; every figure is the maker's.

  1. 1Komatsu GD655-7This page4.32 m
  2. 2Cat 144.3 m
  3. 3Cat 1203.7 m
  4. 4Cat 12M3.7 m
  5. 5Cat 1403.7 m
  6. 6Cat 1603.7 m
  7. 7John Deere 672G3.66 m
  8. 8Cat 140H3.66 m

Komatsu GD655-7 fault codes and serial number

All Komatsu fault codesFind the year from a Komatsu serial number

More Komatsu GD655-7 questions

How much horsepower does the Komatsu GD655-7 have?

218 hp (163 kW) net, gears 7-8, at 2,100 rpm (SAE J1349).

How deep can a Komatsu GD655-7 cut?

Its maximum depth of cut is 615 mm (24.2 in).

How tall is a Komatsu GD655-7?

3.20 m (10 ft 6 in) overall.

How high can the blade on a Komatsu GD655-7 lift?

480 mm (18.9 in) above ground.

How wide is a Komatsu GD655-7?

2.68 m (8 ft 10 in) overall.

How much torque does a Komatsu GD655-7 have?

941 Nm (694 lb-ft), at 1,450 rpm.

How deep can the ripper on a Komatsu GD655-7 dig?

425 mm (16.7 in).

What is the articulation angle of a Komatsu GD655-7?

25°.

What are the Komatsu GD655-7's main competitors?

The machines nearest it in size are the Cat 160, the Cat 140 and the Cat 12M. Each has a side-by-side comparison on EquipmentsFinder.

Is the Komatsu GD655-7 sold in the UAE?

Yes. The Komatsu GD655-7 is sold in the UAE and other markets worldwide; builds can differ by market, so check emissions and options with the dealer.

What is a Komatsu GD655-7 used for?

A motor grader: a long machine with an adjustable blade between its axles, used to cut and level ground to an exact grade. Typical jobs: levelling road bases, cutting slopes and ditches, spreading and grading material, maintaining unpaved roads.

Embed this spec card

The Komatsu GD655-7's key figures as a small card for your own page. Copy the code and paste it where the card should go; the card stays up to date with the sheet here.

<iframe src="https://www.equipmentsfinder.com/embed/models/komatsu-gd655" title="Komatsu GD655-7 specs" width="100%" height="480" style="border:0;max-width:480px" loading="lazy"></iframe>
<p style="font-size:12px"><a href="https://www.equipmentsfinder.com/models/komatsu-gd655">Komatsu GD655-7 specs</a> by <a href="https://www.equipmentsfinder.com">EquipmentsFinder</a></p>

Calculators and other cards to embed are in the embed kit.

Need a Komatsu GD655-7 on site?

Post the job: where, when and for how long. Suppliers with a machine contact you directly. Free to post.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.