Cat 140 specs
Cat 140 dimensions
| Letter | Dimension | Metric and imperial |
|---|---|---|
| 7 | Overall length | 10.297 m405.4 in |
| 15 | Overall length, ripper raised | 9.963 m392.2 in |
| 6 | Front tyre to rear of machine | 8.911 m350.8 in |
| 5 | Wheelbase | 6.136 m241.6 in |
| 17 | Front axle to articulation hitch | 5.292 m208.3 in |
| 19 | Rear axle to rear of machine | 2.099 m82.6 in |
| 4 | Front axle to moldboard | 2.564 m100.9 in |
| 3 | Tandem axle spacing | 1.498 m59.0 in |
| 1 | Overall height (to top of cab) | 3.454 m136.0 in |
| 10 | Height to top of exhaust | 3.313 m130.4 in |
| 9 | Height to top of cylinders | 3.044 m119.8 in |
| 2 | Height to front axle centre | 0.612 m24.1 in |
| 8 | Ground clearance | 0.333 m13.1 in |
| 11 | Tread width | 2.087 m82.2 in |
| 16 | Width inside rear tyres | 1.642 m64.6 in |
| 12 | Width over rear tyres | 2.532 m99.7 in |
| 13 | Width over tyres | 2.521 m99.3 in |
Cat 140 specifications
Current Cat 140 (build 16A, global, 2025) with the Cat C7.1, non-AWD tandem with lever (LVR) controls and 3.7 m (12 ft) moldboard, in its U.S. EPA Tier 3 / Stage IIIA-equivalent build (a Tier 4 Final / Stage V build also exists); not the 140 GC.
34 figures in 7 groups
Dimensions
- Rear axle to articulation hitch
- 0.844 m
Weight
- Operating weight
- 18,748 kg
Engine
- Engine model
- Cat C7.1
- Emissions
- U.S. EPA Tier 3 / Stage IIIA equivalent (also offered as Tier 4 Final / Stage V)
- Cylinders
- 6
- Displacement
- 7 L
- Net power
- 94-174 kW
- Max torque
- 1,070 Nmtandem (AWD 1159 N·m)
- Rated speed
- 2,000 rpm
Performance
- Top speed
- 48.3 km/hforward
- Top speed, reverse
- 38.1 km/h
- Turning radius (outside front tyres)
- 7.5 m
- Steering range, left/right
- 50°
- Articulation angle, left/right
- 20°
Transmission and hydraulics
- Transmission
- Direct drive powershift; 9 forward (including finish gear) / 6 reverse
- Pump flow
- 0-148 L/min
- Max pressure
- 25 500 kPa
Moldboard and blade range
- Blade width
- 3.7 m12 ft moldboard (14 ft 4.3 m optional)
- Moldboard height
- 610 mm
- Moldboard thickness
- 22 mm
- Arc radius
- 413 mm
- Throat clearance
- 125 mm
- Circle centreshift, right
- 740 mmwith 14 ft moldboard
- Circle centreshift, left
- 724 mmwith 14 ft moldboard
- Moldboard sideshift, right
- 947 mmstandard, with 17.5R25 tyres
- Moldboard sideshift, left
- 821 mmstandard, with 17.5R25 tyres
- Maximum blade position angle
- 104° left / 101.7° right
- Blade tip range, forward
- 50°
- Blade tip range, backward
- 5°
- Max shoulder reach outside tyres, right
- 1,948 mmnon-AWD, standard, 12 ft moldboard
- Max shoulder reach outside tyres, left
- 1,830 mmnon-AWD, standard, 12 ft moldboard
- Max lift above ground
- 447 mmstandard
- Max depth of cut
- 640 mm
Tyres
- Tyres
- 14.0R24
Cat 140 service
What each system holds and when Cat says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.
Loading the 3D machine...
Drag to turn · scroll to zoom · built from the maker's drawing; markers show where each system is
- Engine oil
- 20 L
Fluid: Cat DEO-ULS SAE 15W-40 (rated -10 to 50 °C) (Caterpillar Machine Fluids Recommendations SEBU6250-30 (Dec 2020))
Cat groups the daily service points on the left-hand side of the machine.
The engine sits right behind the cab in the heat of its enclosure; Gulf heat and blade dust age the oil fastest, so do not stretch the change.
Confirm fluid grades in your machine's operator's manual: they vary by build year and climate.
Service capacities
- Fuel tank
- 371 L98.0 gal
- DEF tank
- 17 L4.5 gal
- Cooling system
- 43 L11.4 gal
- Hydraulic system
- 60 L15.9 gal
- Engine oil
- 20 L5.3 gal
- Transmission and differential
- 68 L18.0 gal
- Tandem housing, each
- 70 L18.5 gal
- Circle drive housing
- 7 L1.8 gal
Service intervals
- Coolant
- 12,000 hours
Compare the Cat 140
The machines nearest in size, each drawn beside this one at the same scale.
Moving a Cat 140
A first look from the sheet. Your haulier or forwarder confirms the load.
- Length
- 10.3m
- Width
- 2.52m
- Height
- 3.45m
- Weight
- 18.7t
- RoadA 3 or 4-axle lowbed
- SeaA 40 ft flat rack, out of gauge (over-width, over-height): expect a surcharge
Cat 140 prices and listings in the UAE
Asking prices on EquipmentsFinder, in AED, refreshed daily.
Typical hire, per daymedian of 7
AED 1,500 /day
No priced Cat 140 for hire yet: this is all motor graders
About the Cat 140
The Cat 140 is a 18.7-tonne motor grader with a Cat C7.1 engine rated at 94-174 kW.
It travels at up to 48.3 km/h.
For transport it measures 10.297 m long and 2.521 m wide, and its tank holds 371 L of fuel.
A motor grader: a long machine with an adjustable blade between its axles, used to cut and level ground to an exact grade.
Typical jobs: levelling road bases, cutting slopes and ditches, spreading and grading material, maintaining unpaved roads.
Cat 140 questions
How much does a Cat 140 weigh?
18,748 kg (41,332.3 lb) in working order, with fuel, operator and standard attachment.
How wide is the Cat 140's moldboard?
3.7 m (12.1 ft).
What are the Cat 140's dimensions?
10.30 m long, 2.52 m wide and 3.45 m high, from Cat's dimension drawing.
How do you transport a Cat 140?
Road: a 3 or 4-axle lowbed. Sea: a 40 ft flat rack, out of gauge (over-width, over-height): expect a surcharge.
What is the Cat 140's fuel tank capacity?
371 L (98.0 gal).
How much oil does a Cat 140 take?
Engine oil: 20 L (5.3 gal). Hydraulic oil: 60 L (15.9 gal).
What are the Cat 140's main competitors?
The machines nearest it in size are the Cat 12M, the Cat 160, the Cat 140H. Each has a side-by-side comparison on EquipmentsFinder.
Is the Cat 140 sold in the UAE?
Yes. The Cat 140 is sold in the UAE and the Gulf, the USA, other markets worldwide; builds can differ by market, so check emissions and options with the dealer.
What is a Cat 140 used for?
A motor grader: a long machine with an adjustable blade between its axles, used to cut and level ground to an exact grade. Typical jobs: levelling road bases, cutting slopes and ditches, spreading and grading material, maintaining unpaved roads.
Need a Cat 140 on site?
Post the job - where, when and for how long. Suppliers with a machine contact you directly. Free to post.
