EF Logo

Cat 12M vs Cat 140

The Cat 140 is the heavier machine, at 18.7 t against 18.4 t.

The Cat 12M is ahead on: bigger fuel tank, narrower to transport, lower to transport. The Cat 140 is ahead on: more torque, faster, turns tighter.

Below, every figure both makers publish sits side by side, with the Cat 12M and the Cat 140 drawn to the same scale from their dimension drawings.

  1. Cat · motor grader

    Cat 12M

    Full specsPDF

  2. Cat · motor grader

    Cat 140

    Full specsPDF

  3. Add a model

At a glance

Bold is the machine ahead on each figure, with its lead.

FigureCat 12MCat 140
Operating weight18,400 kg18,748 kg
Max torqueHigher is better1,052 Nm1,070 Nm+2%
Fuel tankHigher is better416 L+12%371 L
Top speedHigher is better46.6 km/h48.3 km/h+4%
Turning radius (outside front tyres)Lower is better7.6 m7.5 m+1%
Width over tyresLower is better2.511 m2.521 m
Overall height (to top of cab)Lower is better3.308 m+4%3.454 m
Overall length10.136 m10.297 m

All specifications

Every figure the makers publish. Search for one, or show only those that differ.

Dimensions

Overall length10.136 mpush plate to ripper10.297 mpush plate to ripper
Overall length, ripper raised9.818 mpush plate to ripper, retracted9.963 mpush plate to raised ripper
Front tyre to rear of machine8.754 m8.911 mnon-AWD
Wheelbase6.123 mfront axle to mid tandem6.136 mfront axle to rear axle (mid tandem)
Front axle to moldboard2.552 m2.564 m
Tandem axle spacing1.523 mlength between tandem axles1.498 mlength between tandem axles
Overall height (to top of cab)3.308 m3.378 m with Product Link3.454 m
Height to top of exhaust3.076 m3.313 m
Height to top of cylinders3.04 m3.044 m
Height to front axle centre0.596 m0.612 m
Ground clearance0.339 mat rear axle0.333 mat rear axle
Tread width2.14 mtyre centre lines2.087 mrear tyre centre lines
Width over rear tyres2.511 m2.532 m
Width over tyres2.511 moutside front tyres2.521 m
Front axle to articulation hitchNot published5.292 m
Rear axle to articulation hitchNot published0.844 m
Rear axle to rear of machineNot published2.099 m
Width inside rear tyresNot published1.642 m

Weight

Operating weight18,400 kg18,748 kg
Base weight16,231 kgNot published
Maximum gross vehicle weight22,045 kgNot published

Engine

Engine modelCat C7 ACERTCat C7.1
EmissionsEquivalent to U.S. EPA Tier 3 / EU Stage IIIAU.S. EPA Tier 3 / Stage IIIA equivalent (also offered as Tier 4 Final / Stage V)
Cylinders66
Displacement7.2 L7 L
Net power136 kW (183 hp)base power, 1st gear (ISO 9249)94-174 kW
Net power, VHP Plus range136-159 kWNot published
Max torque1,052 NmVHP Plus, at 1,000 rpm1,070 Nmtandem (AWD 1159 N·m)
Rated speed2,000 rpm2,000 rpm

Performance

Top speed46.6 km/hforward48.3 km/hforward
Top speed, reverse36.8 km/h38.1 km/h
Turning radius (outside front tyres)7.6 m7.5 m
Steering range, left/right48°50°
Articulation angle, left/right20°20°

Transmission and hydraulics

TransmissionDirect drive, power shift, countershaft; 8 forward / 6 reverseDirect drive powershift; 9 forward (including finish gear) / 6 reverse
Pump flow210 L/minvariable piston pump, at 2,150 rpm0-148 L/min
Max pressure24 150 kPa25 500 kPa

Moldboard and blade range

Blade width3.7 m3.7 m12 ft moldboard (14 ft 4.3 m optional)
Moldboard height610 mm610 mm
Moldboard thickness22 mm22 mm
Arc radius413 mm413 mm
Throat clearance166 mm125 mm
Blade pull10,810 kgbase GVW (maximum GVW 13 685 kg)Not published
Down pressure7,244 kgbase GVW (maximum GVW 11 739 kg)Not published
Circle centreshift, right728 mm740 mmwith 14 ft moldboard
Circle centreshift, left695 mm724 mmwith 14 ft moldboard
Moldboard sideshift, right660 mm947 mmstandard, with 17.5R25 tyres
Moldboard sideshift, left510 mm821 mmstandard, with 17.5R25 tyres
Maximum blade position angle90°104° left / 101.7° right
Blade tip range, forward40°50°
Blade tip range, backward5°5°
Max shoulder reach outside tyres, right1,978 mm1,948 mmnon-AWD, standard, 12 ft moldboard
Max shoulder reach outside tyres, left1,790 mm1,830 mmnon-AWD, standard, 12 ft moldboard
Max lift above ground480 mm447 mmstandard
Max depth of cut715 mm640 mm
Ripping depth, maximum428 mmNot published

Tyres

Tyres14.00R24 on multi-piece rims14.0R24

Service capacities

Fuel tank416 L371 L
Cooling system40 L43 L
Hydraulic tank64 LNot published
Engine oil25 L20 Lengine crankcase
Transmission, differential and final drives64 LNot published
Tandem housing, each64 L70 L
Circle drive housing7 L7 L
DEF tankNot published17 LTier 4 Final/Stage V build
Hydraulic systemNot published60 L
Transmission and differentialNot published68 L

Service intervals

Coolant12,000 hours12,000 hours

Sources: Cat 12M/140M/140M AWD/160M/160M AWD Motor Graders specalog AEHQ7232-02 (03-2018) · Cat 140 Motor Grader Technical Specifications AEXQ4475-00 (10-2025), build 16A (Global), as Zeppelin (Cat dealer, Czech Republic) publishes it

Drawn to scale

Side views measured off each maker's dimension drawing, front edges and ground lined up.

0 m1 m2 m3 m4 m5 m6 m7 m8 m9 m10 m
Cat 12MCat 140Same scale, front edges and ground lined up.

Cat 12M vs Cat 140: questions

Which is bigger, the Cat 12M or Cat 140?

By operating weight the Cat 140 is the biggest at 18.7 t, then the Cat 12M at 18.4 t.

Which has the bigger fuel tank, the Cat 12M or Cat 140?

The Cat 12M: Cat 12M 416 L, Cat 140 371 L (fuel tank), a 12% difference.

Which turns tighter, the Cat 12M or Cat 140?

The Cat 140: Cat 12M 7.6 m, Cat 140 7.5 m (turning radius (outside front tyres)), a 1% difference.

Which is narrower to transport, the Cat 12M or Cat 140?

The Cat 12M: Cat 12M 2.511 m, Cat 140 2.521 m (width over tyres), a 0% difference.

Where do these figures come from?

Each model's own published spec sheet or brochure, linked under the table. Builds differ by market and year, so confirm the figures for a particular machine with its dealer.

Can I rent or buy these machines in the UAE?

Each model's page lists the ones for hire and for sale on EquipmentsFinder now, with typical prices in AED.

More comparisons

EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.