EF Logo

motor gradermade by CatUAE, Global

Cat 14 (14M3)Specs, weight and dimensions

Weight
26 t
25,968 kg
Horsepower
238 hp
178 kW
Est. new price
~AED 2.73M

Quick answer

The Cat 14 is a 26-tonne motor grader with a Cat C13 VHP (Variable Horsepower Plus) engine rated at 178 kW (238 hp). It travels at up to 50.5 km/h. It suits levelling road bases, cutting slopes and ditches and spreading and grading material. Its rivals include the Cat 12M (18.4 t) and the Komatsu GD655-7 (19.7 t).

Cat 14 (illustration)

How much does a Cat 14 weigh?

The Cat 14 weighs 26 tonnes (25,968 kg, 57,250 lb) in working order, with fuel, operator and standard attachment. That is 41% heavier than the Cat 12M (18.4 t) and 32% heavier than the Komatsu GD655-7 (19.7 t). The figures are from Cat 14 Motor Grader specalog AEHQ7821-04 (10-2019), build 15A (Tier 4 Final / Stage V, Tier 3 / Stage IIIA equivalent, Tier 2 / Stage II equivalent).

What engine is in the Cat 14?

The Cat 14 has a Cat C13 VHP (Variable Horsepower Plus) engine rated at 178 kW (238 hp) net, base power, 1st gear, ISO 9249 (241 hp metric). It displaces 12.5 L (763 in³) and makes 1,542 Nm (1,137 lbf-ft) of torque. The fuel tank holds 416 L (109.9 gal) and the engine takes 30 L (7.9 gal) of oil.

Cat fault codes

How wide is the Cat 14's moldboard?

The Cat 14 travels at up to 50.5 km/h. In imperial units the blade width is 14 ft. The sheet notes: standard; 4166 mm without end bits, 4290 mm with end bits; optional 4.9 m (16 ft). On the same row of their sheets, the Cat 12M shows 3.7 m and the Komatsu GD655-7 shows 4.32 m.

What are the Cat 14 dimensions?

The Cat 14 is 10.90 m (35 ft 9 in) long, 3.05 m (10 ft) wide and 3.57 m (11 ft 8 in) high. As it stands it is too big for the door of a standard shipping container. The Cat 12M is 10.14 m long, 2.51 m wide and 3.31 m high.

Cat 14 vs Cat 12M: what is the difference?

The Cat 14 is 41% heavier than the Cat 12M: 26 t against 18.4 t. The Cat 14 has more power (178 kW against 136 kW), has more torque (1,542 Nm against 1,052 Nm) and has more hydraulic flow (257 L/min against 210 L/min). Both sets of figures are the makers’ own, for the builds on our sheets.

These figures are for the 14 (formerly 14M3). The 14M, 14H and 14G are not covered here and have figures of their own, so check the serial plate before using these for one.

Cat 14 dimensions

Cat 14, side view with dimensions (illustration)3.57 m10.9 m
Side view
Cat 14, front view (illustration)3.05 m
Front view
Overall height
3.57 m
Overall length
10.9 m
Overall width
3.05 m

Illustration; figures from the maker's sheet.

How big is the Cat 14?

Drawn to one scale from the maker’s dimension drawing, on one ground line.

Cat 14 drawn to scale beside a person, a pickup truck and a 40 ft container. The Cat 14 is 10.9 m long - 89% of a forty-foot container's length - and 3.57 m tall, 2 times a person's height.Cat 1410.9 × 3.57 mPerson1.75 m tallPickup truck5.3 × 1.8 m40 ft container12.19 × 2.59 m
The Cat 14 is 10.9 m long - 89% of a forty-foot container's length - and 3.57 m tall, 2 times a person's height.

Cat 14 specifications

Every figure is the maker's, with the document and page it came from. Sheet last updated 16 November 2026.

97 figures in 9 groups, each with its source

Dimensions

Dimensions, part 1 of 2
FigureValue (metric)Source
Overall length10.901 mCounterweight to ripper, raised[1] p.24
Front tyre to rear of machine9.6 m[1] p.24
Wheelbase6.559 mFront axle to mid tandem[1] p.24
Front axle to moldboard2.84 m[1] p.24
Tandem axle spacing1.656 mLength between tandem axles[1] p.24
Overall height (to top of cab)3.566 m[1] p.24
Height to top of exhaust3.468 m[1] p.24
Dimensions, part 2 of 2
FigureValue (metric)Source
Height to top of cylinders2.91 m[1] p.24
Height to front axle centre0.762 m[1] p.24
Ground clearance0.373 mAt rear axle[1] p.24
Tread width2.516 mTyre centre lines[1] p.24
Width over rear tyres3.05 mOutside rear tyres[1] p.24
Width over tyres3.05 mOutside front tyres[1] p.24

Weight

Weight, part 1 of 2
FigureValue (metric)Source
Operating weight25,968 kgTypically equipped, construction: 4.3 m moldboard, 20.5R25 tyres, pushblock, ripper, belly guard, full fluids; mining configuration 26 174 kg[1] p.23
Base weight23,124 kgStandard configuration, 20.5 R25 tyres, ROPS cab, full fuel tank, operator[1] p.22
Maximum gross vehicle weight30,835 kgMaximum tested[1] p.22
Weight, part 2 of 2
FigureValue (metric)Source
Front axle load6,915 kgTypically equipped; base 6344 kg; maximum 9867 kg[1] p.22
Rear axle load19,053 kgTypically equipped; base 16 780 kg; maximum 20 968 kg[1] p.22

Engine

Engine, part 1 of 2
FigureValue (metric)Source
Engine modelCat C13 VHP (Variable Horsepower Plus)[1] p.20
EmissionsU.S. EPA Tier 4 Final / EU Stage V, China Nonroad Stage III (Tier 3 / Stage IIIA equivalent), or Tier 2 / Stage II equivalent, by country[1] p.20
Cylinders6[1] p.20
Displacement12.5 L[1] p.20
Bore130 mm[1] p.20
Stroke157 mm[1] p.20
Net power178 kW (238 hp)Base power, 1st gear, ISO 9249 (241 hp metric)[1] p.20
Net power, VHP range178-213 kWRises by gear; 8th forward 213 kW (285 hp)[1] p.20
Engine, part 2 of 2
FigureValue (metric)Source
Engine power (ISO 14396)228 kW (306 hp)Tier 4 Final / Stage V and China III, at 1,850 rpm[1] p.20
Max torque1,542 NmISO 9249[1] p.20
Torque rise41%[1] p.20
Rated speed1,850 rpm[1] p.20
Fan speed550 rpm minimum, 1,600 rpm maximum[1] p.20
Ambient capability50 °C (122 °F)Standard[1] p.20
Altitude without derating3,673 mTier 4 Final / Stage V and Tier 2 equivalent; Tier 3 equivalent 4374 m (14,349 ft)[1] p.20
Electrical system24 V; maintenance-free heavy-duty batteries, 1,125 CCA; 150 A sealed alternator[1] p.25

Performance

Performance, part 1 of 2
FigureValue (metric)Source
Top speed50.5 km/hForward, 8th gear, 20.5 R25 L-3 tyres[1] p.21
Top speed, reverse39.9 km/h6th gear[1] p.21
Turning radius (outside front tyres)8 m[1] p.21
Steering range, left/right50°[1] p.21
Articulation angle, left/right20°[1] p.21
Speed, gear 1 forward4.4 km/h[1] p.21
Speed, gear 2 forward6 km/h[1] p.21
Speed, gear 3 forward8.7 km/h[1] p.21
Speed, gear 4 forward12 km/h[1] p.21
Performance, part 2 of 2
FigureValue (metric)Source
Speed, gear 5 forward18.6 km/h[1] p.21
Speed, gear 6 forward25.2 km/h[1] p.21
Speed, gear 7 forward34.7 km/h[1] p.21
Speed, gear 1 reverse3.5 km/h[1] p.21
Speed, gear 2 reverse6.5 km/h[1] p.21
Speed, gear 3 reverse9.5 km/h[1] p.21
Speed, gear 4 reverse14.7 km/h[1] p.21
Speed, gear 5 reverse27.4 km/h[1] p.21

Transmission and hydraulics

Transmission and hydraulics, part 1 of 2
FigureValue (metric)Source
TransmissionDirect drive, power shift, countershaft; 8 forward / 6 reverse[1] p.20
Service brakesHydraulic, multiple disc, oil-cooled[1] p.20
Dynamic brake torque per wheel24,518 Nm[1] p.20
Parking brakeSpring apply, hydraulic release[1] p.20
Hydraulic circuitElectro-hydraulic load sensing, closed centre, variable piston pump[1] p.20
Transmission and hydraulics, part 2 of 2
FigureValue (metric)Source
Pump flow257 L/minAt high idle 1,950 rpm[1] p.20
Max pressure241 barMaximum system pressure 24 100 kPa[1] p.20
Standby pressure59 bar[1] p.20
BrakesHydraulic, multiple oil disc service brakes (dynamic brake torque 24 518 Nm per wheel); spring-applied, hydraulically released parking brake; dual-circuit secondary control[1] p.20

Frame and axles

Frame and axles, part 1 of 2
FigureValue (metric)Source
Circle diameter1.822 mOuter diameter[1] p.21
Blade beam thickness50 mm[1] p.21
Front frame structure419 mm high, 336 mm wide, 16 mm side/top plates[1] p.21
Drawbar203 mm high, 76 mm wide[1] p.21
Front axle wheel lean, left/right17°[1] p.21
Frame and axles, part 2 of 2
FigureValue (metric)Source
Front axle oscillation per side32°Total[1] p.21
Tandem oscillation, front up15°[1] p.21
Tandem oscillation, front down25°[1] p.21
Tandem case616 mm high, 214 mm wide, 20 mm sidewalls, 57.15 mm drive chain pitch[1] p.21

Moldboard and blade range

Moldboard and blade range, part 1 of 2
FigureValue (metric)Source
Blade width4.3 mStandard; 4166 mm without end bits, 4290 mm with end bits; optional 4.9 m (16 ft)[1] p.22
Moldboard height585 mm631 mm with cutting edge[1] p.22
Moldboard thickness25 mm[1] p.22
Arc radius413 mm[1] p.22
Throat clearance117 mm[1] p.22
Cutting edge203 mm high x 19 mm thick, 2131 mm wide (two sections)[1] p.22
End bit452 mm high x 15 mm thick, 152 mm wide[1] p.22
Blade pull15,102 kgBase GVW; maximum GVW 18 871 kg; 0.9 traction coefficient[1] p.22
Down pressure11,188 kgBase GVW; maximum GVW 17 402 kg[1] p.22
Circle centreshift, right520 mm[1] p.21
Circle centreshift, left650 mm[1] p.21
Moldboard sideshift, right790 mm[1] p.21
Moldboard sideshift, left740 mm[1] p.21
Moldboard and blade range, part 2 of 2
FigureValue (metric)Source
Maximum blade position angle90 deg (AccuGrade / cross slope); 360 deg standard[1] p.21
Blade tip range, forward40°[1] p.21
Blade tip range, backward5°[1] p.21
Max shoulder reach outside tyres, right2,004 mm[1] p.21
Max shoulder reach outside tyres, left1,870 mm[1] p.21
Max lift above ground419 mm[1] p.21
Max depth of cut593 mm[1] p.21
Ripping depth, maximum404 mmRipper with 7 shank holders[1] p.22
Ripper penetration force13,116 kg[1] p.22
Ripper pryout force21,228 kg[1] p.22
Ripper shank holder spacing373 mm minimum, 472 mm maximum[1] p.22
Machine length increase, ripper beam raised766 mm[1] p.22

Tyres

Tyres
FigureValue (metric)Source
Tyres20.5 R25 on 17x25 multi-piece rimsOptions: Bridgestone VJT, Bridgestone VKT, Michelin XHA, Michelin X SNO Plus (all 1 star)[1] p.24

Sound

Sound
FigureValue (metric)Source
Operator sound pressure level72 dB(A)ISO 6396:2008, cab closed[1] p.22
Exterior sound power level108 dB(A) Stage V; 110 dB(A) Tier 2 and Tier 3 equivalentISO 6395:2008[1] p.22

Build: Cat 14 motor grader (the renamed 14M3; C13 VHP, 8 forward / 6 reverse powershift, 4.3 m moldboard, 20.5 R25 tyres), typically equipped construction machine, from the 14 Motor Grader specalog AEHQ7821-04 (10-2019), build 15A. Covers the Tier 4 Final / Stage V, Tier 3-equivalent and Tier 2-equivalent C13 builds; the earlier 14M, 14H and 14G are not covered.

  1. [1]Cat 14 Motor Grader specalog AEHQ7821-04 (10-2019), build 15A (Tier 4 Final / Stage V, Tier 3 / Stage IIIA equivalent, Tier 2 / Stage II equivalent)
  2. [2]Cat 14 Motor Grader key features AEXQ1749-07 (01-2024), build 15A
  3. [3]Cat 14M3 Motor Grader key features AEXQ1749-02 (06-2016) (AME, Indonesia, NACD)
  4. [4]Cat Machine Fluids Recommendations, Operation and Maintenance Manual (all machines) - coolant service life

Cat 14 service

What each system holds and when Cat says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.

Service capacities

Fuel tank
416 L109.9 gal
Diesel exhaust fluid tank
22 L5.8 gal
Cooling system
60 L15.9 gal
Hydraulic system
125 L33 gal
Hydraulic tank
60 L15.9 gal
Engine oil
30 L7.9 gal
Transmission, differential and final drives
89 L23.5 gal
Tandem housing, each
100 L26.4 gal
Front wheel spindle bearing housing
0.9 L0.24 gal
Circle drive housing
7 L1.8 gal

Service intervals

Coolant
12,000 hours

Cat 14 against its rivals

The motor graders nearest in weight from other makers, figure by figure, each shown at the same scale.

Cat 14, Cat 12M, Komatsu GD655-7, John Deere 672G: specifications side by side
FigureCat 14this pageCat 12M specsKomatsu GD655-7 specsJohn Deere 672G specs
Operating weight25,968 kg18,400 kg19,730 kg17,140 kg
Net power178 kW (238 hp)136 kW (183 hp)163 kW (218 hp)190 kW (255 hp)
Max torque1,542 Nm1,052 Nm941 Nm1,292 Nm
Pump flow257 L/min210 L/min200 L/min212 L/min
Fuel tank416 L416 L390 L416.5 L
Top speed50.5 km/h46.6 km/h44.3 km/h45.5 km/h
Turning radius (outside front tyres)8 m7.6 m7.4 mnot on its sheet
Width over tyres3.05 m2.511 m2.68 mnot on its sheet
Overall height (to top of cab)3.566 m3.308 mnot on its sheet3.18 m
Every figureFull sheet

Underlined: the figure that leads its row. Weight has no better way, so it is never marked. All figures are the makers' own.

  • Pick the Cat 14 if you need more torque (1,542 Nm), more hydraulic flow (257 L/min) and more speed (50.5 km/h).
  • Pick the Cat 12M if you need a narrower machine to move (2.511 m).
  • Pick the Komatsu GD655-7 if you need a tighter turn (7.4 m).
  • Pick the John Deere 672G if you need more power (190 kW), a bigger fuel tank (416.5 L) and a lower machine to move (3.18 m).

Cat 14 prices and listings in the UAE

Asking prices on EquipmentsFinder, in AED, refreshed daily.

A new Cat 14 costs about AED 2,645,000 to AED 2,810,000, base machine before options, freight and tax - an estimate from nearly new units for sale, checked November 2026. Sources: equipbook.ai, contractorshotline.com.

Cat 14 on EquipmentsFinder in the UAE now: 5 listed for rent, 1 listed for sale. Too few carry a price to give a Cat 14 range, so the figure below is for all motor graders.

Who is asking for motor graders in the UAE

Contractors posted 9 requests for motor graders on the EquipmentsFinder Inquiry Board in the last 12 months. Most were for Abu Dhabi (6) and Dubai (3). Requests name a kind of machine, not a model, so this counts every motor grader, the Cat 14 among them.

Requests, last 12 months
9
For Abu Dhabi
6
For Dubai
3
  • Motor Grader Required For rent URGENTLYAbu Dhabi / 19 November 2026
  • Motor Grader Required For RentDubai / 17 November 2026
  • Motor Grader Required For RentDubai / 16 November 2026

Open motor grader requests on the Inquiry BoardPost a request for a Cat 14

Does a Cat 14 fit in a shipping container?

The machine as it stands on the sheet. Your haulier or forwarder confirms the load.

No. As it stands on the sheet the Cat 14 is 3.05 m wide against a 2.34 m door opening and 3.57 m high against a 2.28 m door of a standard container, so it ships on a flat rack, by RoRo or as break-bulk unless it is stripped down.

Length
10.9 m
Width
3.05 m
Height
3.57 m
Weight
26 t

Container figures: door opening 2.34 m wide by 2.28 m high, 5.9 m inside a 20 ft box and 12.03 m inside a 40 ft one (Hapag-Lloyd container specification). A size check only: payload is on each container's plate. Trailer class and road permits depend on the haulier and the route, so they are not given here.

Tools for a Cat 14

For the people who run one: codes, charts and calculators that fit a motor grader.

Ranked: Motor graders by blade width

By blade width, widest-blade first. The Cat 14 is 2 of 8; every figure is the maker's.

  1. 1Komatsu GD655-74.32 m
  2. 2Cat 14This page4.3 m
  3. 3Cat 1203.7 m
  4. 4Cat 12M3.7 m
  5. 5Cat 1403.7 m
  6. 6Cat 1603.7 m
  7. 7John Deere 672G3.66 m
  8. 8Cat 140H3.66 m

Popular Cat motor grader models

Cat 14 fault codes and serial number

All Cat fault codesFind the year from a Cat serial number

More Cat 14 questions

How much horsepower does the Cat 14 have?

238 hp (178 kW) net, Base power, 1st gear, ISO 9249 (241 hp metric).

How deep can a Cat 14 cut?

Its maximum depth of cut is 593 mm (23.3 in).

How tall is a Cat 14?

3.57 m (11 ft 8 in) overall.

How high can the blade on a Cat 14 lift?

419 mm (16.5 in) above ground.

How wide is a Cat 14?

3.05 m (10 ft) overall.

How much torque does a Cat 14 have?

1,542 Nm (1,137 lbf-ft).

How deep can the ripper on a Cat 14 dig?

404 mm (15.9 in), ripper with 7 shank holders.

What is the articulation angle of a Cat 14?

20°.

What are the Cat 14's main competitors?

The machines nearest it in size are the Komatsu GD655-7, the Cat 160 and the Cat 140. Each has a side-by-side comparison on EquipmentsFinder.

Is the Cat 14 sold in the UAE?

Yes. The Cat 14 is sold in the UAE and other markets worldwide; builds can differ by market, so check emissions and options with the dealer.

What is a Cat 14 used for?

A motor grader: a long machine with an adjustable blade between its axles, used to cut and level ground to an exact grade. Typical jobs: levelling road bases, cutting slopes and ditches, spreading and grading material, maintaining unpaved roads.

Embed this spec card

The Cat 14's key figures as a small card for your own page. Copy the code and paste it where the card should go; the card stays up to date with the sheet here.

<iframe src="https://www.equipmentsfinder.com/embed/models/cat-14m" title="Cat 14 specs" width="100%" height="480" style="border:0;max-width:480px" loading="lazy"></iframe>
<p style="font-size:12px"><a href="https://www.equipmentsfinder.com/models/cat-14m">Cat 14 specs</a> by <a href="https://www.equipmentsfinder.com">EquipmentsFinder</a></p>

Calculators and other cards to embed are in the embed kit.

Need a Cat 14 on site?

Post the job: where, when and for how long. Suppliers with a machine contact you directly. Free to post.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.