EF Logo

excavatormade by HitachiUAE, Global

Hitachi ZX200-5GSpecs, weight and dimensions

Weight
19.8 t
19,800 kg
Dig depth
6.67 m
21.9 ft
Est. new price
AED 715k-880k

Quick answer

The Hitachi ZX200-5G is a 19.8-tonne excavator with an Isuzu CC-6BG1T engine rated at 125 kW (168 HP). It digs to 6.67 m, reaches 9.75 m, dumps at up to 7.18 m and works a 0.8 m³ bucket. It suits digging foundations and trenches, loading dump trucks and demolition with a breaker. People compare it with the Komatsu PC200 (21.2 t) and the Cat 320 (21.3 t).

Hitachi ZX200-5G (illustration)

How much does a Hitachi ZX200-5G weigh?

The Hitachi ZX200-5G weighs 19.8 tonnes (19,800 kg, 43,650 lb) in working order, with fuel, operator and standard attachment. That is 7% lighter than the Komatsu PC200 (21.2 t) and 7% lighter than the Cat 320 (21.3 t). It puts 44 kPa (0.45 kgf/cm2) of pressure on the ground. The figures are from Hitachi ZAXIS-5G series Southeast Asia brochure KA-EN182HMAP-Q (Hitachi Construction Machinery Asia and Pacific, 2019).

What engine is in the Hitachi ZX200-5G?

The Hitachi ZX200-5G has a Isuzu CC-6BG1T engine rated at 125 kW (168 HP) net, ISO 9249 and SAE J1349, at 2,100 rpm. It displaces 6.5 L and makes 637 Nm (470 lbf·ft) of torque. Emissions: EU Stage II / US EPA Tier 2. The fuel tank holds 400 L (105.7 US gal) and the engine takes 25 L (6.6 US gal) of oil.

How deep can a Hitachi ZX200-5G dig?

The Hitachi ZX200-5G digs to 6.67 m, reaches 9.75 m, dumps at up to 7.18 m and works a 0.8 m³ bucket. In imperial units the digging depth is 21.9 ft. The sheet notes: excluding track shoe lug. On the same row of their sheets, the Komatsu PC200 shows 6.62 m and the Cat 320 shows 6.72 m.

What are the Hitachi ZX200-5G dimensions?

The Hitachi ZX200-5G is 9.66 m (31 ft 8 in) long, 2.86 m (9 ft 5 in) wide and 2.95 m (9 ft 8 in) high. As it stands it is too big for the door of a standard shipping container. The Komatsu PC200 is 9.43 m long, 2.80 m wide and 3.04 m high.

Hitachi ZX200-5G vs Komatsu PC200: what is the difference?

The Hitachi ZX200-5G is 7% lighter than the Komatsu PC200: 19.8 t against 21.2 t. The Hitachi ZX200-5G has more power (125 kW against 103 kW), digs deeper (6.67 m against 6.62 m) and reaches further (9.92 m against 9.875 m). The Komatsu PC200 has more hydraulic flow (439 L/min against 424 L/min), turns tighter (2.75 m against 2.89 m) and is narrower to transport (2.8 m against 2.86 m).

Hitachi ZX200-5G vs Komatsu PC200, every figure

These figures are for the ZX200-5G. The ZX200-3 and ZX200-6 are not covered here and have figures of their own, so check the serial plate before using these for one.

Hitachi ZX200-5G dimensions

Hitachi ZX200-5G, side view with dimensions (illustration)2.95 m3.37 m9.66 m
Side view
Hitachi ZX200-5G, front view (illustration)2.86 m
Front view
Overall height
2.95 m
Track on ground
3.37 m
Overall length
9.66 m
Overall width
2.86 m

Illustration; figures from the maker's sheet.

How big is the Hitachi ZX200-5G?

Drawn to one scale from the maker’s dimension drawing, on one ground line.

Hitachi ZX200-5G drawn to scale beside a person and a pickup truck. The Hitachi ZX200-5G is 9.66 m long - about 1.8 pickup trucks - and 2.95 m tall, 1.7 times a person's height.Hitachi ZX200-5G9.66 × 2.95 mPerson1.75 m tallPickup truck5.3 × 1.8 m
The Hitachi ZX200-5G is 9.66 m long - about 1.8 pickup trucks - and 2.95 m tall, 1.7 times a person's height.

Hitachi ZX200-5G specifications

Every figure is the maker's, with the document and page it came from. Sheet last updated 17 November 2026.

77 figures in 7 groups, each with its source

Dimensions

Dimensions, part 1 of 2
FigureValue (metric)Source
Track length on ground3.37 mSprocket centre to idler centre; 3.66 m on ZX210LC-5G; Hitachi prints this as the distance between tumblers[1] p.22
Track length4.17 m4.47 m on ZX210LC-5G[1] p.22
Ground clearance, counterweight1.03 mExcluding track shoe lug[1] p.22
Tail swing radius2.89 m[1] p.22
Rear-end length2.89 m[1] p.22
Overall width of upperstructure2.71 m[1] p.22
Overall height (to top of cab)2.95 m[1] p.22
Overall height of upperstructure3.01 m[1] p.22
Dimensions, part 2 of 2
FigureValue (metric)Source
Ground clearance (minimum)0.45 mExcluding track shoe lug[1] p.22
Track gauge2.2 m2.39 m on ZX210LC-5G[1] p.22
Shoe width0.6 mTriple grouser shoe[1] p.22
Undercarriage width2.8 m2.99 m on ZX210LC-5G[1] p.22
Overall width2.86 mWith 600 mm shoes; 2.91 m with 700 mm and 3.00 m with 800 mm shoes (basic machine, p.20)[1] p.22
Track height with triple grouser shoes0.92 mExcluding track shoe lug[1] p.22
Overall length9.66 mTransport length with 2.91 m arm[1] p.22
Overall height (to top of boom)2.94 mTransport height with 2.91 m arm[1] p.22

Working range

Working range
FigureValue (metric)Source
Max digging depth, 2.5 m flat bottom6.49 m[1] p.22
Min dumping height2.65 m[1] p.22
Min swing radius3.18 m[1] p.22

Weight

Weight, part 1 of 2
FigureValue (metric)Source
Operating weight19,800 kg600 mm triple-grouser shoes, 5.68 m boom, 2.91 m arm, 0.80 m3 bucket; the ZX210LC-5G is 20,400 kg[1] p.19
Operating weight, 700 mm shoes20,200 kg[1] p.19
Operating weight, 800 mm shoes20,500 kg[1] p.19
Ground pressure44 kPa (0.45 kgf/cm2)600 mm shoes; 39 kPa (0.40) with 700 mm and 34 kPa (0.35) with 800 mm shoes[1] p.19
Basic machine weight15,400 kg600 mm shoes; excluding front attachment, fuel, hydraulic oil and coolant, including counterweight[1] p.20
Weight, part 2 of 2
FigureValue (metric)Source
Counterweight4,200 kg[1] p.20
Boom weight2,180 kgWith boom and arm cylinder[1] p.20
Arm weight920 kg2.91 m arm, with bucket cylinder[1] p.20
Bucket weight660 kg0.80 m3 bucket[1] p.20

Performance

Performance, part 1 of 2
FigureValue (metric)Source
Bucket capacity0.8 m³ISO heaped; bucket width 1,030 mm without and 1,140 mm with side cutters, 5 teeth (p.21)[1] p.1
Bucket digging force158 kNISO, at power boost; 16,200 kgf[1] p.21
Bucket digging force (SAE PCSA)141 kNSAE PCSA, at power boost; 14,400 kgf[1] p.21
Arm digging force114 kNArm crowd force, ISO, at power boost; 11,600 kgf[1] p.21
Arm digging force (SAE PCSA)110 kNArm crowd force, SAE PCSA, at power boost; 11,200 kgf[1] p.21
Swing speed13.5 rpm[1] p.18
Max swing torque68,000 Nm6,900 kgfm[1] p.18
Travel speed (high)5.5 km/hLow 3.5 km/h; automatic High-Low transmission[1] p.18
Travel speed (low)3.5 km/h[1] p.18
Performance, part 2 of 2
FigureValue (metric)Source
Max drawbar pull203 kN20,700 kgf; Hitachi prints this as maximum traction force[1] p.18
Gradeability35°70%, continuous[1] p.18
Max digging reach9.92 m[1] p.22
Max reach at ground level9.75 m[1] p.22
Max digging depth6.67 mExcluding track shoe lug[1] p.22
Max digging height10.04 mHitachi's 'max. cutting height'[1] p.22
Max dumping height7.18 m[1] p.22
Max vertical wall digging depth5.99 m[1] p.22

Engine

Engine, part 1 of 2
FigureValue (metric)Source
Engine modelIsuzu CC-6BG1T[1] p.18
Type4-cycle water-cooled, direct injection[1] p.18
AspirationTurbocharged, intercooled[1] p.18
EmissionsEU Stage II / US EPA Tier 2[1] p.6
Cylinders6[1] p.18
Bore105 mm[1] p.18
Engine, part 2 of 2
FigureValue (metric)Source
Stroke125 mm[1] p.18
Displacement6.5 L[1] p.18
Net power125 kW (168 HP)ISO 9249 and SAE J1349, at 2,100 rpm[1] p.18
Max torque637 Nm65 kgfm at 1,800 rpm[1] p.18
Batteries2 x 12 V / 88 Ah[1] p.18

Hydraulics

Hydraulics, part 1 of 2
FigureValue (metric)Source
Main pumps2 variable-displacement axial piston pumps[1] p.18
Pump flow424 L/minMaximum, 2 x 212 L/min[1] p.18
Pilot pump1 gear pump, 33.6 L/min[1] p.18
Max pressure34.3 MPa (350 kgf/cm2)Implement relief valve setting; 38.0 MPa (388 kgf/cm2) with power boost[1] p.18
Max pressure, swing34.3 MPa (350 kgf/cm2)Relief valve setting[1] p.18
Max pressure, travel34.3 MPa (350 kgf/cm2)Relief valve setting[1] p.18
Pilot circuit pressure3.9 MPa (40 kgf/cm2)[1] p.18
Hydraulics, part 2 of 2
FigureValue (metric)Source
Power boost pressure38.0 MPa (388 kgf/cm2)[1] p.18
Travel motors2 variable-displacement swash plate piston motors[1] p.18
Swing motor1 swash plate piston motor[1] p.18
Boom cylinders2 - bore 120 mm, rod 85 mm[1] p.18
Arm cylinder1 - bore 135 mm, rod 95 mm[1] p.18
Bucket cylinder1 - bore 115 mm, rod 80 mm[1] p.18

Undercarriage

Undercarriage, part 1 of 2
FigureValue (metric)Source
Upper rollers (each side)2[1] p.18
Lower rollers (each side)78 on ZX210LC-5G[1] p.18
Track shoes (each side)4649 on ZX210LC-5G[1] p.18
Track guards1[1] p.18
Undercarriage, part 2 of 2
FigureValue (metric)Source
Standard shoes600 mm triple grouser700 and 800 mm triple-grouser shoes are options[1] p.27
Track adjusterHydraulic (grease) with shock-absorbing recoil springs[1] p.18
Parking brakeSpring-set, hydraulic-released disc type[1] p.18
Swing parking brakeSpring-set, hydraulic-released disc type[1] p.18

Build: Hitachi ZX200-5G (standard undercarriage, 5.68 m boom, 2.91 m arm, 600 mm triple-grouser shoes, 0.80 m3 ISO heaped bucket, 4,200 kg counterweight) from Hitachi Construction Machinery Asia and Pacific's ZAXIS-5G Southeast Asia brochure KA-EN182HMAP-Q (June 2019). Hitachi's UAE site lists the ZX200-5G; the long-undercarriage ZX210LC-5G figures are not used.

  1. [1]Hitachi ZAXIS-5G series Southeast Asia brochure KA-EN182HMAP-Q (Hitachi Construction Machinery Asia and Pacific, 2019)
  2. [2]Hitachi Construction Machinery, ZX200-5G product page, UAE (model listing only, no figures taken)

Hitachi ZX200-5G service

What each system holds and when Hitachi says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.

Service capacities

Fuel tank
400 L105.7 US gal
Cooling system
23 L6.1 US gal
Engine oil
25 L6.6 US gal
Swing drive
6.2 L1.6 US gal
Final drive (each)
6.8 L1.8 US gal
Hydraulic system, with tank
240 L63.4 US gal
Hydraulic tank
135 L35.7 US gal

Hitachi ZX200-5G against its rivals

The excavators nearest in weight from other makers, figure by figure, each shown at the same scale.

Hitachi ZX200-5G, Komatsu PC200, Cat 320, Cat M318: specifications side by side
FigureHitachi ZX200-5Gthis pageKomatsu PC200 specsCat 320 specsCat M318 specs
Operating weight19,800 kg21,200 kg21,300 kg19,200 kg
Net power125 kW (168 HP)103 kW (138 HP)117 kW (157 hp)102.9 kW (138 hp)
Max digging depth6.67 m6.62 m6.72 m6.29 m
Max digging reach9.92 m9.875 mnot on its sheet9.77 m
Max dumping height7.18 m7.11 m6.49 m7.62 m
Bucket capacity0.8 m³0.8 m³1.19 m³0.8 m³
Bucket digging force158 kN138 kN150 kN119 kN
Pump flow424 L/min439 L/min429 L/min254 L/min
Fuel tank400 L400 L345 L350 L
Every figureFull sheetHitachi ZX200-5G vs Komatsu PC200Hitachi ZX200-5G vs Cat 320

Underlined: the figure that leads its row. Weight has no better way, so it is never marked. All figures are the makers' own.

  • Pick the Hitachi ZX200-5G if you need more power (125 kW), longer reach (9.92 m) and more digging force (158 kN).
  • Pick the Komatsu PC200 if you need more hydraulic flow (439 L/min).
  • Pick the Cat 320 if you need a deeper dig (6.72 m) and a bigger bucket (1.19 m³).
  • Pick the Cat M318 if you need a higher dump (7.62 m).

Hitachi ZX200-5G prices and listings in the UAE

Asking prices on EquipmentsFinder, in AED, refreshed daily.

A new Hitachi ZX200-5G costs about AED 715,000 to AED 880,000, base machine before options, freight and tax - an estimate from published estimates, checked November 2026. Sources: equipbook.ai.

Hitachi ZX200-5G on EquipmentsFinder in the UAE now: none for rent, 1 listed for sale. Too few carry a price to give a Hitachi ZX200-5G range, so the figure below is for all excavators.

See all 1

Typical asking price, usedmedian of 24

AED 85,000

No priced Hitachi ZX200-5G for sale yet: this is all excavators

Low AED 32,000High AED 285,000

Who is asking for excavators in the UAE

Contractors posted 48 requests for excavators on the EquipmentsFinder Inquiry Board in the last 12 months. Most were for Dubai (28), Abu Dhabi (11) and Fujairah (3). Requests name a kind of machine, not a model, so this counts every excavator, the Hitachi ZX200-5G among them.

Requests, last 12 months
48
For Dubai
28
For Abu Dhabi
11
  • 20 Ton Wheel Excavator Required For Purchase19 November 2026
  • 20 ton Tracked excavator pre-fitted with hydraulic vibratory roller Required For RentAbu Dhabi / 17 November 2026
  • 85 Ton Excavator with 26m Boom Required For RentDubai / 16 November 2026

Open excavator requests on the Inquiry BoardPost a request for a Hitachi ZX200-5G

Does a Hitachi ZX200-5G fit in a shipping container?

The machine as it stands on the sheet. Your haulier or forwarder confirms the load.

No. As it stands on the sheet the Hitachi ZX200-5G is 2.86 m wide against a 2.34 m door opening and 2.95 m high against a 2.28 m door of a standard container, so it ships on a flat rack, by RoRo or as break-bulk unless it is stripped down.

Length
9.66 m
Width
2.86 m
Height
2.95 m
Weight
19.8 t

Container figures: door opening 2.34 m wide by 2.28 m high, 5.9 m inside a 20 ft box and 12.03 m inside a 40 ft one (Hapag-Lloyd container specification). A size check only: payload is on each container's plate. Trailer class and road permits depend on the haulier and the route, so they are not given here.

Tools for a Hitachi ZX200-5G

For the people who run one: codes, charts and calculators that fit an excavator.

Same class: 20 ton excavators

20 ton excavators with an operating weight of 17 to 25 t, lightest first. The Hitachi ZX200-5G is 3 of 17; every figure is the maker's.

  1. 1Hyundai R170W-917.3 t
  2. 2Cat M31819.2 t
  3. 3Hitachi ZX200-5GThis page19.8 t
  4. 4Komatsu PC21020.5 t
  5. 5Volvo EC21020.8 t
  6. 6Kobelco SK200-1020.8 t
  7. 7Komatsu PC20021.2 t
  8. 8Hyundai HX220S21.3 t
  9. 9Cat 32021.3 t

Showing 1 to 9 of 17, the machines nearest the Hitachi ZX200-5G by operating weight.

Popular Hitachi excavator models

More Hitachi ZX200-5G questions

How much horsepower does the Hitachi ZX200-5G have?

168 hp (125 kW) net, ISO 9249 and SAE J1349, at 2,100 rpm.

What size bucket does a Hitachi ZX200-5G take?

0.8 m³ (1.05 yd³) is the bucket the maker quotes its figures with; other sizes fit.

How far can a Hitachi ZX200-5G reach?

Its maximum reach at ground level is 9.75 m (32 ft).

How tall is a Hitachi ZX200-5G?

2.95 m (9 ft 8 in) overall.

How wide is a Hitachi ZX200-5G?

2.86 m (9 ft 5 in) overall.

How high can a Hitachi ZX200-5G dig?

Its maximum digging height is 10.04 m (32.9 ft), hitachi's 'max. cutting height'.

How much torque does a Hitachi ZX200-5G have?

637 Nm (470 lbf·ft), 65 kgfm at 1,800 rpm.

What is the tail swing radius of a Hitachi ZX200-5G?

2.89 m (9.5 ft).

What are the Hitachi ZX200-5G's main competitors?

The machines nearest it in size are the Cat M318, the Komatsu PC210 and the Volvo EC210. Each has a side-by-side comparison on EquipmentsFinder.

Is the Hitachi ZX200-5G sold in the UAE?

Yes. The Hitachi ZX200-5G is sold in the UAE and other markets worldwide; builds can differ by market, so check emissions and options with the dealer.

What is a Hitachi ZX200-5G used for?

A crawler excavator: a digging arm and bucket on a cab that turns all the way round, on tracks for grip and stability. Typical jobs: digging foundations and trenches, loading dump trucks, demolition with a breaker, lifting pipes into trenches.

Embed this spec card

The Hitachi ZX200-5G's key figures as a small card for your own page. Copy the code and paste it where the card should go; the card stays up to date with the sheet here.

<iframe src="https://www.equipmentsfinder.com/embed/models/hitachi-zx200" title="Hitachi ZX200-5G specs" width="100%" height="480" style="border:0;max-width:480px" loading="lazy"></iframe>
<p style="font-size:12px"><a href="https://www.equipmentsfinder.com/models/hitachi-zx200">Hitachi ZX200-5G specs</a> by <a href="https://www.equipmentsfinder.com">EquipmentsFinder</a></p>

Calculators and other cards to embed are in the embed kit.

Need a Hitachi ZX200-5G on site?

Post the job: where, when and for how long. Suppliers with a machine contact you directly. Free to post.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.