EF Logo

excavatormade by CatUAE, Global

Cat M318Specs, weight and dimensions

Weight
19.2 t
19,200 kg
Dig depth
6.29 m
Est. new price
~AED 665k

Quick answer

The Cat M318 is a 19.2-tonne excavator with a Cat C4.4 Unity engine rated at 102.9 kW (138 hp). It digs to 6.29 m, reaches 9.61 m, dumps at up to 7.62 m and works a 0.8 m³ bucket. It suits digging foundations and trenches, loading dump trucks and demolition with a breaker. Its rivals include the Hyundai R170W-9 (17.3 t) and the Hitachi ZX200-5G (19.8 t).

Cat M318 (illustration)

How much does a Cat M318 weigh?

The Cat M318 weighs 19.2 tonnes (19,200 kg, 42,330 lb) in working order, with fuel, operator and standard attachment. That is 11% heavier than the Hyundai R170W-9 (17.3 t) and 3% lighter than the Hitachi ZX200-5G (19.8 t). The figures are from Cat M318 (07E) Wheel Excavator, Technical Specifications (Africa-Middle East, N Am).

What engine is in the Cat M318?

The Cat M318 has a Cat C4.4 Unity engine rated at 102.9 kW (138 hp) net, ISO 9249, rated speed 2,000 rpm; 140 hp (metric). It displaces 4.4 L (268.5 in3). Emissions: Equivalent to U.S. EPA Tier 3 and EU Stage IIIA. The fuel tank holds 350 L (92.5 gal) and the engine takes 13 L (3.4 gal) of oil.

Cat fault codes

How deep can a Cat M318 dig?

The Cat M318 digs to 6.29 m, reaches 9.61 m, dumps at up to 7.62 m and works a 0.8 m³ bucket. In imperial units the digging depth is 20' 8". The sheet notes: 5.89 m with the 2,500 mm stick. On the same row of their sheets, the Hyundai R170W-9 shows 5.42 m and the Hitachi ZX200-5G shows 6.67 m.

What are the Cat M318 dimensions?

The Cat M318 is 8.69 m (28 ft 6 in) long, 2.54 m (8 ft 4 in) wide and 3.20 m (10 ft 6 in) high. As it stands it is too big for the door of a standard shipping container. The Hyundai R170W-9 is 8.65 m long, 2.50 m wide and 3.19 m high.

Cat M318 vs Hyundai R170W-9: what is the difference?

The Cat M318 is 11% heavier than the Hyundai R170W-9: 19.2 t against 17.3 t. The Cat M318 digs deeper (6.29 m against 5.42 m), reaches further (9.77 m against 8.69 m) and dumps higher (7.62 m against 6.35 m). Both sets of figures are the makers’ own, for the builds on our sheets.

These figures are for the next-generation M318. The M318D and M318F are not covered here and have figures of their own, so check the serial plate before using these for one.

Cat M318 dimensions

Cat M318, side view with dimensions (illustration)3.2 m8.69 m
Side view
Cat M318, front view (illustration)2.54 m
Front view
Overall height
3.2 m
Overall length
8.69 m
Overall width
2.54 m

Illustration; figures from the maker's sheet.

How big is the Cat M318?

Drawn to one scale from the maker’s dimension drawing, on one ground line.

Cat M318 drawn to scale beside a person and a pickup truck. The Cat M318 is 8.69 m long - about 1.6 pickup trucks - and 3.2 m tall, 1.8 times a person's height.Cat M3188.69 × 3.2 mPerson1.75 m tallPickup truck5.3 × 1.8 m
The Cat M318 is 8.69 m long - about 1.6 pickup trucks - and 3.2 m tall, 1.8 times a person's height.

Cat M318 specifications

Every figure is the maker's, with the document and page it came from. Sheet last updated 17 November 2026.

83 figures in 7 groups, each with its source

Dimensions

Dimensions, part 1 of 2
FigureValue (metric)Source
Overall height3.35 mShipping height without operator protective guards (highest point between boom and cab); 3.36 m with guards[1] p.5
Overall length8.69 mShipping length, 2,900 mm stick; 8.42 m with the 2,500 mm stick[1] p.5
Support point3.34 mDimension 3 on Cat drawing; 3.52 m with the 2,500 mm stick[1] p.5
Tail swing radius2.35 m[1] p.5
Ground clearance, counterweight1.3 m[1] p.5
Overall height (to top of cab)3.2 mNo operator protective guards; 3.32 m with guards, 3.42 m with roof wiper guard[1] p.5
Linkage height in shipping position3.35 mGround to top of hydraulic lines; 3.22 m with the 2,500 mm stick[1] p.5
Width with outriggers fully down3.65 m3.82 m with outriggers on the ground[1] p.5
Overall width of upperstructure2.54 m[1] p.5
Steering wheel to linkage in roading position2.89 m2.87 m with the 2,500 mm stick[1] p.5
Height in roading position3.98 m2.89 m with the 2,500 mm stick[1] p.5
Dimensions, part 2 of 2
FigureValue (metric)Source
Overall length of undercarriage5.05 mRear blade / front outrigger undercarriage[1] p.7
Wheelbase2.7 m[1] p.7
Swing centre to rear axle1.25 m[1] p.7
Swing centre to front axle1.45 m[1] p.7
Front axle to front outrigger (mid)0.875 m[1] p.7
Rear axle to blade (end)1.2 m[1] p.7
Max outrigger depth below ground0.12 m[1] p.7
Outrigger clearance0.325 m[1] p.7
Blade clearance (parallel)0.495 m[1] p.7
Ground clearance (minimum)0.36 mAxle clearance; lowest step clearance 0.42 m[1] p.7
Overall width2.54 mWith outriggers up or blade[1] p.5

Performance

Performance, part 1 of 2
FigureValue (metric)Source
Max digging height10.58 mPrinted as maximum cutting height; 10.26 m with the 2,500 mm stick[1] p.8
Max dumping height7.62 mPrinted as maximum loading height; 7.30 m with the 2,500 mm stick[1] p.8
Max digging depth6.29 m5.89 m with the 2,500 mm stick[1] p.8
Max vertical wall digging depth4.98 m4.60 m with the 2,500 mm stick[1] p.8
Max depth cut for 2,440 mm level bottom6.19 m5.79 m with the 2,500 mm stick[1] p.8
Max digging reach9.77 m9.39 m with the 2,500 mm stick[1] p.8
Max reach at ground level9.61 m9.21 m with the 2,500 mm stick[1] p.8
Min loading height2.59 m2.97 m with the 2,500 mm stick[1] p.8
Min front swing radius3.03 m2.90 m with the 2,500 mm stick[1] p.8
Bucket capacity0.8 m³General-duty bucket used for the working ranges; bucket tip radius 1,378 mm (pin-on), 1,484 mm (quick coupler)[1] p.8
Bucket digging force119 kNISO, heavy lift on, general-duty pin-on bucket[1] p.8
Performance, part 2 of 2
FigureValue (metric)Source
Arm digging force67 kNISO, 2,900 mm stick; 75 kN (16,861 lbf) with the 2,500 mm stick[1] p.8
Swing speed9.4 rpmMaximum; CE-marked machines may be set lower[1] p.2
Max swing torque44,000 Nm[1] p.2
Top speed35 km/hSecond gear, forward and reverse[1] p.2
Travel speed, 1st10 km/h[1] p.2
Creeper speed, 1st gear5.5 km/h[1] p.2
Creeper speed, 2nd gear15 km/h[1] p.2
Max drawbar pull104 kN[1] p.2
Gradeability60%At 19,000 kg[1] p.2
Sound level, cab70 dB(A)ISO 6396:2008, operator internal[1] p.4
Sound power level, external102 dB(A)ISO 6395:2008[1] p.4

Weight

Weight, part 1 of 2
FigureValue (metric)Source
Operating weight19,200 kgVAB with blade and outriggers, medium stick, 4,200 kg counterweight, full fuel tank, operator, 610 kg bucket and dual pneumatic tyres. Front and rear outriggers 19,400 kg; one-piece boom 18,800 kg with blade and outriggers, 19,000 kg with front and rear outriggers. Range 18,800 to 19,730 kg[1] p.2
Counterweight4,200 kg[1] p.3
Undercarriage weight6,000 kgRear blade / front outrigger, incl. axles, standard tyres and steps; front blade / rear outrigger 5,965 kg; front and rear outriggers 6,200 kg[1] p.3
Weight, part 2 of 2
FigureValue (metric)Source
Boom weight2,200 kgVAB 5,205 mm incl. VA and stick cylinder, pins and lines; one-piece boom 5,100 mm 1,810 kg[1] p.3
Arm weight860 kg2,900 mm stick incl. cylinder, bucket linkage and pins; 2,500 mm stick 810 kg[1] p.3
Bucket weight610 kgCW general-duty 1,200 mm, 0.91 m3; pin-on 650 kg. Quick coupler CW30 220 kg, pin grabber 300 kg[1] p.3

Engine

Engine, part 1 of 2
FigureValue (metric)Source
Engine modelCat C4.4 Unity[1] p.2
EmissionsEquivalent to U.S. EPA Tier 3 and EU Stage IIIA[1] p.2
Cylinders4[1] p.2
Displacement4.4 L[1] p.2
Gross power108 kW (145 hp)ISO 14396; 147 hp (metric)[1] p.2
Engine, part 2 of 2
FigureValue (metric)Source
Net power102.9 kW (138 hp)ISO 9249, rated speed 2,000 rpm; 140 hp (metric)[1] p.2
Bore105 mm[1] p.2
Stroke127 mm[1] p.2
Biodiesel capabilityUp to B20[1] p.2

Hydraulics

Hydraulics, part 1 of 2
FigureValue (metric)Source
Pump flow254 L/minImplement circuit, maximum[1] p.3
Max pressure350 barImplement circuit, normal (35,000 kPa)[1] p.3
Max pressure, equipment (lift mode)370 barHeavy lift (37,000 kPa)[1] p.3
Max pressure, travel350 bar[1] p.3
Max pressure, swing350 bar[1] p.3
Max pressure, auxiliary (high)350 barMedium pressure auxiliary circuit 170 bar (2,466 psi)[1] p.3
Travel circuit flow235 L/min[1] p.3
Hydraulics, part 2 of 2
FigureValue (metric)Source
Auxiliary flow (high pressure)250 L/minMedium-pressure auxiliary circuit 55 lpm[1] p.3
Swing circuit flow98 L/min[1] p.3
Boom cylinder (VA boom)120 mm bore, 916 mm strokeTwo cylinders on the VA boom; one-piece boom 120 mm bore, 893 mm stroke[1] p.3
VA adjust cylinder140 mm bore, 743 mm stroke[1] p.3
Stick cylinder120 mm bore, 1,147 mm stroke[1] p.3
Bucket cylinder100 mm bore, 1,055 mm stroke[1] p.3

Undercarriage

Undercarriage, part 1 of 2
FigureValue (metric)Source
Tyres10.00-20 dual pneumaticOptional 11.00-20 dual pneumatic[1] p.3
Max steering angle35°[1] p.2
Oscillation axle angle9°Plus and minus 8.5 degrees[1] p.2
Undercarriage, part 2 of 2
FigureValue (metric)Source
Min turning radius, outside of tyre6.6 m7.9 m with plastic fender[1] p.2
Min turning radius, end of VA boom7.1 m8.4 m with the one-piece boom[1] p.2

Blade

Blade, part 1 of 2
FigureValue (metric)Source
Blade typeParallel[1] p.4
Blade width2.54 m[1] p.4
Blade roll-over height0.57 m[1] p.4
Blade, part 2 of 2
FigureValue (metric)Source
Blade total height0.61 m[1] p.4
Max blade depth below ground0.13 m[1] p.4
Max blade raising height above ground0.495 m[1] p.4

Build: Cat M318 wheeled excavator (next generation, 07E), figures from Cat's Technical Specifications for Africa-Middle East (C4.4 Unity engine, Tier 3 / Stage IIIA-equivalent), for the variable adjustable boom (VAB) 5,205 mm, 2,900 mm stick, 10.00-20 dual tyres and rear blade with front outriggers. It replaces the M318F; the M318D and M318F are earlier generations.

  1. [1]Cat M318 (07E) Wheel Excavator, Technical Specifications (Africa-Middle East, N Am)
  2. [2]Cat M318 product page (cat.com, Europe)

Cat M318 service

What each system holds and when Cat says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.

Service capacities

Fuel tank
350 L92.5 gal
Cooling system
23 L6.1 gal
Engine oil
13 L3.4 gal
Hydraulic tank
122 L32.2 gal
Hydraulic system, with tank
260 L68.7 gal
Axle oil, rear
14 L4 gal
Axle oil, front
10.5 L2.8 gal
Final drive (each)
2.5 L0.7 gal
Powershift transmission
2.5 L0.7 gal

Cat M318 against its rivals

The excavators nearest in weight from other makers, figure by figure, each shown at the same scale.

Cat M318, Hyundai R170W-9, Hitachi ZX200-5G, Komatsu PC210: specifications side by side
FigureCat M318this pageHyundai R170W-9 specsHitachi ZX200-5G specsKomatsu PC210 specs
Operating weight19,200 kg17,300 kg19,800 kg20,500 kg
Gross power108 kW (145 hp)122 kW (163 HP)not on its sheet123 kW (165 HP)
Max torquenot on its sheet733 Nm637 Nmnot on its sheet
Max digging depth6.29 m5.42 m6.67 m6.515 m
Max digging reach9.77 m8.69 m9.92 m9.86 m
Max dumping height7.62 m6.35 m7.18 m7.16 m
Bucket capacity0.8 m³0.76 m³0.8 m³1 m³
Bucket digging force119 kN124 kN158 kN149 kN
Pump flow254 L/minnot on its sheet424 L/min475 L/min
Every figureFull sheet

Underlined: the figure that leads its row. Weight has no better way, so it is never marked. All figures are the makers' own.

  • Pick the Cat M318 if you need a higher dump (7.62 m).
  • Pick the Hyundai R170W-9 if you need more torque (733 Nm).
  • Pick the Hitachi ZX200-5G if you need a deeper dig (6.67 m), longer reach (9.92 m) and more digging force (158 kN).
  • Pick the Komatsu PC210 if you need more gross power (123 kW), a bigger bucket (1 m³) and more hydraulic flow (475 L/min).

Cat M318 prices and listings in the UAE

Asking prices on EquipmentsFinder, in AED, refreshed daily.

A new Cat M318 costs about AED 625,000 to AED 700,000, base machine before options, freight and tax - an estimate from nearly new units for sale, checked November 2026. Sources: mylittlesalesman.com, mylittlesalesman.com.

Cat M318 on EquipmentsFinder in the UAE now: 2 listed for rent, 1 listed for sale. Too few carry a price to give a Cat M318 range, so the figure below is for all excavators.

See all 2

Typical hire, per daymedian of 28

AED 1,225 /day

No priced Cat M318 for hire yet: this is all excavators

Low AED 800High AED 1,800

Who is asking for excavators in the UAE

Contractors posted 48 requests for excavators on the EquipmentsFinder Inquiry Board in the last 12 months. Most were for Dubai (28), Abu Dhabi (11) and Fujairah (3). Requests name a kind of machine, not a model, so this counts every excavator, the Cat M318 among them.

Requests, last 12 months
48
For Dubai
28
For Abu Dhabi
11
  • 20 Ton Wheel Excavator Required For Purchase19 November 2026
  • 20 ton Tracked excavator pre-fitted with hydraulic vibratory roller Required For RentAbu Dhabi / 17 November 2026
  • 85 Ton Excavator with 26m Boom Required For RentDubai / 16 November 2026

Open excavator requests on the Inquiry BoardPost a request for a Cat M318

Does a Cat M318 fit in a shipping container?

The machine as it stands on the sheet. Your haulier or forwarder confirms the load.

No. As it stands on the sheet the Cat M318 is 2.54 m wide against a 2.34 m door opening and 3.20 m high against a 2.28 m door of a standard container, so it ships on a flat rack, by RoRo or as break-bulk unless it is stripped down.

Length
8.69 m
Width
2.54 m
Height
3.2 m
Weight
19.2 t

Container figures: door opening 2.34 m wide by 2.28 m high, 5.9 m inside a 20 ft box and 12.03 m inside a 40 ft one (Hapag-Lloyd container specification). A size check only: payload is on each container's plate. Trailer class and road permits depend on the haulier and the route, so they are not given here.

Tools for a Cat M318

For the people who run one: codes, charts and calculators that fit an excavator.

Same class: 20 ton excavators

20 ton excavators with an operating weight of 17 to 25 t, lightest first. The Cat M318 is 2 of 17; every figure is the maker's.

  1. 1Hyundai R170W-917.3 t
  2. 2Cat M318This page19.2 t
  3. 3Hitachi ZX200-5G19.8 t
  4. 4Komatsu PC21020.5 t
  5. 5Volvo EC21020.8 t
  6. 6Kobelco SK200-1020.8 t
  7. 7Komatsu PC20021.2 t
  8. 8Hyundai HX220S21.3 t
  9. 9Cat 32021.3 t

Showing 1 to 9 of 17, the machines nearest the Cat M318 by operating weight.

Popular Cat excavator models

Cat M318 fault codes and serial number

All Cat fault codesFind the year from a Cat serial number

More Cat M318 questions

How much horsepower does the Cat M318 have?

138 hp (102.9 kW) net, ISO 9249, rated speed 2,000 rpm; 140 hp (metric).

What size bucket does a Cat M318 take?

0.8 m³ (1.05 yd3) is the bucket the maker quotes its figures with; other sizes fit.

How far can a Cat M318 reach?

Its maximum reach at ground level is 9.61 m (31' 6"), 9.21 m with the 2,500 mm stick.

How tall is a Cat M318?

3.20 m (10 ft 6 in) overall.

How wide is a Cat M318?

2.54 m (8 ft 4 in) overall.

How high can a Cat M318 dig?

Its maximum digging height is 10.58 m (34' 9").

What is the tail swing radius of a Cat M318?

2.35 m (7' 9").

What is the hydraulic flow of a Cat M318?

254 L/min (67 gal/min), implement circuit, maximum.

What are the Cat M318's main competitors?

The machines nearest it in size are the Hitachi ZX200-5G, the Komatsu PC210 and the Volvo EC210. Each has a side-by-side comparison on EquipmentsFinder.

Is the Cat M318 sold in the UAE?

Yes. The Cat M318 is sold in the UAE and other markets worldwide; builds can differ by market, so check emissions and options with the dealer.

What is a Cat M318 used for?

A crawler excavator: a digging arm and bucket on a cab that turns all the way round, on tracks for grip and stability. Typical jobs: digging foundations and trenches, loading dump trucks, demolition with a breaker, lifting pipes into trenches.

Embed this spec card

The Cat M318's key figures as a small card for your own page. Copy the code and paste it where the card should go; the card stays up to date with the sheet here.

<iframe src="https://www.equipmentsfinder.com/embed/models/cat-m318" title="Cat M318 specs" width="100%" height="480" style="border:0;max-width:480px" loading="lazy"></iframe>
<p style="font-size:12px"><a href="https://www.equipmentsfinder.com/models/cat-m318">Cat M318 specs</a> by <a href="https://www.equipmentsfinder.com">EquipmentsFinder</a></p>

Calculators and other cards to embed are in the embed kit.

Need a Cat M318 on site?

Post the job: where, when and for how long. Suppliers with a machine contact you directly. Free to post.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.