EF Logo

excavatormade by CatUSA, Global

Cat 315Specs, weight and dimensions

Weight
14.7 t
14,700 kg
Dig depth
5.49 m
Est. new price
~$160k

Quick answer

The Cat 315 is a 14.7-tonne excavator with a Cat C3.6 engine rated at 80.9 kW (108 hp). It digs to 5.49 m, reaches 8.23 m, dumps at up to 6.85 m and works a 0.53 m³ bucket. It suits digging foundations and trenches, loading dump trucks and demolition with a breaker. Nearest in weight are the Hitachi ZX135US (14.2 t) and the Hyundai HW140 (13.9 t).

Cat 315 (illustration)

How much does a Cat 315 weigh?

The Cat 315 weighs 14.7 tonnes (14,700 kg, 32,400 lb) in working order, with fuel, operator and standard attachment. That is 4% heavier than the Hitachi ZX135US (14.2 t) and 6% heavier than the Hyundai HW140 (13.9 t). It puts 43.8 kPa of pressure on the ground. The figures are from Cat 315 (07H) Hydraulic Excavator Technical Specifications AEXQ4119 (Aus-NZ, Singapore; Tier 3 equivalent).

What engine is in the Cat 315?

The Cat 315 has a Cat C3.6 engine rated at 80.9 kW (108 hp) net, ISO 9249, at 2,200 rpm. It displaces 3.6 L (220 in³). Emissions: Emits equivalent to U.S. EPA Tier 3. The fuel tank holds 187 L (49 gal) and the engine takes 8 L (2 gal) of oil.

Cat fault codes

How deep can a Cat 315 dig?

The Cat 315 digs to 5.49 m, reaches 8.23 m, dumps at up to 6.85 m and works a 0.53 m³ bucket. In imperial units the digging depth is 18'0". On the same row of their sheets, the Hitachi ZX135US shows 5.98 m and the Hyundai HW140 shows 4.85 m.

What are the Cat 315 dimensions?

The Cat 315 is 7.45 m (24 ft 5 in) long, 2.49 m (8 ft 2 in) wide and 2.81 m (9 ft 3 in) high. As it stands it is too big for the door of a standard shipping container. The Hitachi ZX135US is 7.39 m long, 2.59 m wide and 2.79 m high.

Cat 315 vs Hitachi ZX135US: what is the difference?

The Cat 315 is 4% heavier than the Hitachi ZX135US: 14.7 t against 14.2 t. The Cat 315 has more power (80.9 kW against 74.9 kW), takes a bigger bucket (0.53 m³ against 0.5 m³) and has more hydraulic flow (276 L/min against 210 L/min). The Hitachi ZX135US digs deeper (5.98 m against 5.49 m), reaches further (8.72 m against 8.23 m) and dumps higher (7.22 m against 6.85 m).

Cat 315 dimensions

Cat 315, side view with dimensions (illustration)2.81 m3.04 m7.45 m
Side view
Cat 315, front view (illustration)2.49 m
Front view
Overall height
2.81 m
Track on ground
3.04 m
Overall length
7.45 m
Overall width
2.49 m

Illustration; figures from the maker's sheet.

How big is the Cat 315?

Drawn to one scale from the maker’s dimension drawing, on one ground line.

Cat 315 drawn to scale beside a person and a pickup truck. The Cat 315 is 7.45 m long - about 1.4 pickup trucks - and 2.81 m tall, 1.6 times a person's height.Cat 3157.45 × 2.81 mPerson1.75 m tallPickup truck5.3 × 1.8 m
The Cat 315 is 7.45 m long - about 1.4 pickup trucks - and 2.81 m tall, 1.6 times a person's height.

Cat 315 specifications

Every figure is the maker's, with the document and page it came from. Sheet last updated 3 November 2026.

57 figures in 6 groups, each with its source

Dimensions

Dimensions, part 1 of 2
FigureValue (metric)Source
Overall height (to top of cab)2.81 m[1] p.5
Overall height (to top of boom)2.9 m[1] p.5
Handrail height2.86 m[1] p.5
Top of OPG height2.96 m[1] p.5
Overall length7.45 m[1] p.5
Overall length (with blade)8.02 m[1] p.5
Upperframe width2.48 m[1] p.5
Tail swing radius1.57 m3.83 t counterweight[1] p.5
Dimensions, part 2 of 2
FigureValue (metric)Source
Ground clearance, counterweight0.88 m[1] p.5
Ground clearance (minimum)0.44 m[1] p.5
Track length on ground3.04 mLength to centre of rollers[1] p.5
Track length3.75 mOverall track length[1] p.5
Track gauge1.99 m[1] p.5
Overall width2.49 mTrack/undercarriage width with 500 mm shoes[1] p.5
Overall width (600 mm shoes)2.59 m[1] p.5
Shoe width0.5 m[1] p.2

Performance

Performance, part 1 of 2
FigureValue (metric)Source
Max digging depth5.49 m[1] p.6
Max reach at ground level8.23 m[1] p.6
Max digging height9.33 m[1] p.6
Max dumping height6.85 m[1] p.6
Min loading height2.53 m[1] p.6
Max depth cut for 2,440 mm level bottom5.28 m[1] p.6
Max vertical wall digging depth4.74 m[1] p.6
Min working equipment radius1.99 m[1] p.6
Performance, part 2 of 2
FigureValue (metric)Source
Bucket capacity0.53 m³GD (general duty) bucket[1] p.6
Bucket digging force98 kN[1] p.6
Arm digging force67 kN[1] p.6
Swing speed12.0 rpm[1] p.2
Max swing torque35 kN·m[1] p.2
Travel speed (high)5.6 km/hMaximum travel speed[1] p.2
Max drawbar pull129 kN[1] p.2
Gradeability35°/70%[1] p.2

Weight

Weight
FigureValue (metric)Source
Operating weight14,700 kg[1] p.2
Counterweight3,830 kg[1] p.4
Ground pressure43.8 kPa500 mm triple grouser shoes, R2.5 stick, 0.53 m³ GD bucket (14,700 kg)[1] p.3

Engine

Engine, part 1 of 2
FigureValue (metric)Source
Engine modelCat C3.6[1] p.2
EmissionsEmits equivalent to U.S. EPA Tier 3[1] p.2
Cylinders4Inline; from Cat's C3.6 industrial engine page[4]
Net power80.9 kW (108 hp)ISO 9249, at 2,200 rpm[1] p.2
Net power (DIN)110 hp (metric)ISO 9249 (DIN)[1] p.2
Gross power82 kW (110 hp)ISO 14396[1] p.2
Engine, part 2 of 2
FigureValue (metric)Source
Gross power (DIN)111 hp (metric)ISO 14396 (DIN)[1] p.2
Bore98 mm[1] p.2
Stroke120 mm[1] p.2
Displacement3.6 L[1] p.2
Biodiesel capabilityUp to B20[1] p.2
Altitude capabilityNo derating required below 3000 m[1] p.2

Hydraulics

Hydraulics, part 1 of 2
FigureValue (metric)Source
Pump flow276 L/minMain system, maximum flow, implement[1] p.2
Max pressure35 000 kPaEquipment, normal[1] p.2
Max pressure, travel35 000 kPa[1] p.2
Max pressure, swing26 000 kPa[1] p.2
Hydraulics, part 2 of 2
FigureValue (metric)Source
Boom cylinders2 - bore 105 mm x stroke 1,023 mmTwo boom cylinders per the sheet's component weights (p.4)[1] p.2
Arm cylinderbore 115 mm x stroke 1,147 mm[1] p.2
Bucket cylinderbore 95 mm x stroke 939 mm[1] p.2

Undercarriage

Undercarriage
FigureValue (metric)Source
Track shoes (each side)46[1] p.2
Track rollers (each side)7[1] p.2
Carrier rollers (each side)2[1] p.2

Build: Cat 315 (next generation, build 07H), Tier 3-equivalent C3.6 build from Cat's Aus-NZ/Singapore Technical Specifications AEXQ4119 (no Gulf/Al-Bahar 315 brochure exists); long undercarriage, 4.65 m reach boom, R2.5 stick, GD 0.53 m³ bucket, 500 mm shoes.

  1. [1]Cat 315 (07H) Hydraulic Excavator Technical Specifications AEXQ4119 (Aus-NZ, Singapore; Tier 3 equivalent)
  2. [2]WesTrac (Cat dealer, Australia) 315 - Tier 3 product page - links the sheet above
  3. [3]Cat 315 Technical Specifications (Europe/ANZ, Stage V build; Zeppelin copy) - used only for measuring the dimension drawing
  4. [4]Cat C3.6 industrial diesel engine page (cat.com) - cylinder layout

Cat 315 service

What each system holds and when Cat says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.

Loading the 3D machine...

Drag to turn · scroll to zoom · built from the maker's drawing; markers show where each system is

  1. Engine oil
    8 L

    Fluid: Cat DEO-ULS SAE 15W-40 (Cat grade for -10 to 50 °C) (Cat 320, 323 Excavator Operation and Maintenance Manual M0068104-12 - Cat's next-generation excavator fluids table (no 315 manual was found online))

    No 315 operator's manual was found online, so the guide gives no change intervals: take them from the machine's own Operation and Maintenance Manual. Filter and ground-level dipstick are behind the right side access door; filler and upper dipstick under the engine service door on top.

    Oil carries soot and heat out of the C3.6; dust and summer heat age it fast, so change it on the hour, not late.

Confirm fluid grades in your machine's operator's manual: they vary by build year and climate.

Service capacities

Fuel tank
187 L49 gal
Cooling system
15 L4 gal
Engine oil
8 L2 gal
Final drive (each)
3 L1 gal
Hydraulic system, with tank
85 L22.5 gal
Hydraulic tank
72 L19 gal

Cat 315 against its rivals

The excavators nearest in weight from other makers, figure by figure, each shown at the same scale.

Cat 315, Hitachi ZX135US, Hyundai HW140, Hyundai R170W-9: specifications side by side
FigureCat 315this pageHitachi ZX135US specsHyundai HW140 specsHyundai R170W-9 specs
Operating weight14,700 kg14,200 kg13,880 kg17,300 kg
Net power80.9 kW (108 hp)74.9 kW (100 hp)111 kW (149 HP)114 kW (153 HP)
Max torquenot on its sheet375 Nm672 Nm733 Nm
Max digging depth5.49 m5.98 m4.85 m5.42 m
Max reach at ground level8.23 m8.72 m7.7 m8.48 m
Max dumping height6.85 m7.22 m6.04 m6.35 m
Bucket capacity0.53 m³0.5 m³0.58 m³0.76 m³
Bucket digging force98 kN104 kN102 kN124 kN
Pump flow276 L/min210 L/minnot on its sheetnot on its sheet
Every figureFull sheet

Underlined: the figure that leads its row. Weight has no better way, so it is never marked. All figures are the makers' own.

  • Pick the Cat 315 if you need more hydraulic flow (276 L/min).
  • Pick the Hitachi ZX135US if you need a deeper dig (5.98 m), longer reach (8.72 m) and a higher dump (7.22 m).
  • Pick the Hyundai HW140 if the lightest machine matters: at 13.9 t it weighs the least of the 4, and it leads no other figure here.
  • Pick the Hyundai R170W-9 if you need more power (114 kW), more torque (733 Nm) and a bigger bucket (0.76 m³).

Cat 315 prices and listings in the UAE

Asking prices on EquipmentsFinder, in AED, refreshed daily.

A new Cat 315 costs about $160,000 (USD), base machine before options, freight and tax - an estimate from published estimates, checked November 2026. Sources: equipbook.ai.

Typical hire, per daymedian of 28

AED 1,225 /day

No priced Cat 315 for hire yet: this is all excavators

Low AED 800High AED 1,800

No Cat 315 for rent listed right now.

Request a Cat 315

Does a Cat 315 fit in a shipping container?

The machine as it stands on the sheet. Your haulier or forwarder confirms the load.

No. As it stands on the sheet the Cat 315 is 2.49 m wide against a 2.34 m door opening and 2.81 m high against a 2.28 m door of a standard container, so it ships on a flat rack, by RoRo or as break-bulk unless it is stripped down.

Length
7.45 m
Width
2.49 m
Height
2.81 m
Weight
14.7 t

Container figures: door opening 2.34 m wide by 2.28 m high, 5.9 m inside a 20 ft box and 12.03 m inside a 40 ft one (Hapag-Lloyd container specification). A size check only: payload is on each container's plate. Trailer class and road permits depend on the haulier and the route, so they are not given here.

Tools for a Cat 315

For the people who run one: codes, charts and calculators that fit an excavator.

Same class: 13 ton excavators

13 ton excavators with an operating weight of 10 to 17 t, lightest first. The Cat 315 is 6 of 6; every figure is the maker's.

  1. 1Cat 31010.4 t
  2. 2Cat 31211.6 t
  3. 3Hyundai HW14013.9 t
  4. 4Cat 31313.9 t
  5. 5Hitachi ZX135US14.2 t
  6. 6Cat 315This page14.7 t

Popular Cat excavator models

Cat 315 fault codes and serial number

All Cat fault codesFind the year from a Cat serial number

More Cat 315 questions

How much horsepower does the Cat 315 have?

108 hp (80.9 kW) net, ISO 9249, at 2,200 rpm.

What size bucket does a Cat 315 take?

0.53 m³ (0.69 yd³) is the bucket the maker quotes its figures with; other sizes fit.

How far can a Cat 315 reach?

Its maximum reach at ground level is 8.23 m (27'0").

How tall is a Cat 315?

2.81 m (9 ft 3 in) overall.

How wide is a Cat 315?

2.49 m (8 ft 2 in) overall.

How high can a Cat 315 dig?

Its maximum digging height is 9.33 m (30'7").

What is the tail swing radius of a Cat 315?

1.57 m (5'2"), 3.83 t counterweight.

What is the hydraulic flow of a Cat 315?

276 L/min (73 gal/min), main system, maximum flow, implement.

What are the Cat 315's main competitors?

The machines nearest it in size are the Hitachi ZX135US, the Cat 313 and the Hyundai HW140. Each has a side-by-side comparison on EquipmentsFinder.

Is the Cat 315 sold in the UAE?

Not new through a Gulf dealer: it is sold in the USA and other markets worldwide. Used and imported machines do come up on EquipmentsFinder.

What is a Cat 315 used for?

A crawler excavator: a digging arm and bucket on a cab that turns all the way round, on tracks for grip and stability. Typical jobs: digging foundations and trenches, loading dump trucks, demolition with a breaker, lifting pipes into trenches.

Embed this spec card

The Cat 315's key figures as a small card for your own page. Copy the code and paste it where the card should go; the card stays up to date with the sheet here.

<iframe src="https://www.equipmentsfinder.com/embed/models/cat-315" title="Cat 315 specs" width="100%" height="480" style="border:0;max-width:480px" loading="lazy"></iframe>
<p style="font-size:12px"><a href="https://www.equipmentsfinder.com/models/cat-315">Cat 315 specs</a> by <a href="https://www.equipmentsfinder.com">EquipmentsFinder</a></p>

Calculators and other cards to embed are in the embed kit.

Need a Cat 315 on site?

Post the job: where, when and for how long. Suppliers with a machine contact you directly. Free to post.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.