EF Logo

Hitachi ZX200-5G vs Komatsu PC200

The Komatsu PC200 is the heavier machine, at 21.2 t against 19.8 t, and the Hitachi ZX200-5G has more power (125 kW against 103 kW).

The Hitachi ZX200-5G is ahead on: more power, digs deeper, reaches further, dumps higher, more digging or pushing force, lower to transport. The Komatsu PC200 is ahead on: more hydraulic flow, turns tighter, narrower to transport.

Below, every figure both makers publish sits side by side, with the Hitachi ZX200-5G and the Komatsu PC200 drawn to the same scale from their dimension drawings.

  1. Hitachi ZX200-5G, side view

    Hitachi · excavator

    Hitachi ZX200-5G

    Full specsPDF

  2. Komatsu PC200, side view

    Komatsu · excavator

    Komatsu PC200

    Full specsPDF

  3. Add a model

At a glance

Bold is the machine ahead on each figure, with its lead.

FigureHitachi ZX200-5GKomatsu PC200
Operating weight19,800 kg21,200 kg
Net powerHigher is better125 kW+21%103 kW
Max digging depthHigher is better6.67 m+1%6.62 m
Max digging reachHigher is better9.92 m9.875 m
Max dumping heightHigher is better7.18 m+1%7.11 m
Bucket digging forceHigher is better158 kN+14%138 kN
Pump flowHigher is better424 L/min439 L/min+4%
Tail swing radiusLower is better2.89 m2.75 m+5%
Overall widthLower is better2.86 m2.8 m+2%
Overall height (to top of cab)Lower is better2.95 m+3%3.04 m
Overall length9.66 m9.425 m

All specifications

Every figure the makers publish. Search for one, or show only those that differ.

Dimensions

Ground contact length3.37 mSprocket centre to idler centre; 3.66 m on ZX210LC-5G; Hitachi prints this as the distance between tumblers3.275 m
Track length4.17 m4.47 m on ZX210LC-5G4.07 m
Ground clearance, counterweight1.03 mExcluding track shoe lug1.085 m
Tail swing radius2.89 m2.75 m
Overall height (to top of cab)2.95 m3.04 m
Ground clearance (minimum)0.45 mExcluding track shoe lug0.44 m
Track gauge2.2 m2.39 m on ZX210LC-5G2.2 m
Shoe width0.6 mTriple grouser shoe0.6 m
Overall width2.86 mWith 600 mm shoes; 2.91 m with 700 mm and 3.00 m with 800 mm shoes (basic machine, p.20)2.8 m
Overall length9.66 mTransport length with 2.91 m arm9.425 m
Overall height (to top of boom)2.94 mTransport height with 2.91 m arm2.97 m

Working range

Min front swing radius3.18 m3.04 m

Weight

Operating weight19,800 kg600 mm triple-grouser shoes, 5.68 m boom, 2.91 m arm, 0.80 m3 bucket; the ZX210LC-5G is 20,400 kg21,200 kg
Ground pressure44 kPa (0.45 kgf/cm2)600 mm shoes; 39 kPa (0.40) with 700 mm and 34 kPa (0.35) with 800 mm shoes0.50 kg/cm2PC200-8M0, 600 mm shoes

Performance

Bucket capacity0.8 m³ISO heaped; bucket width 1,030 mm without and 1,140 mm with side cutters, 5 teeth (p.21)0.8 m³
Bucket digging force158 kNISO, at power boost; 16,200 kgf138 kNSAE rating, at power max; 14,100 kg
Arm digging force114 kNArm crowd force, ISO, at power boost; 11,600 kgf101 kN
Swing speed13.5 rpm12.4 min-1
Top speed5.5 km/hLow 3.5 km/h; automatic High-Low transmission5.5 km/hMid 4.1 km/h, Low 3.0 km/h (Auto-Shift)
Travel speed (low)3.5 km/h3 km/h
Max drawbar pull203 kN20,700 kgf; Hitachi prints this as maximum traction force178 kN18,200 kg
Gradeability35°70%, continuous35°70%
Max digging reach9.92 m9.875 m
Max reach at ground level9.75 m9.7 m
Max digging depth6.67 mExcluding track shoe lug6.62 m
Max digging height10.04 mHitachi's 'max. cutting height'10 m
Max dumping height7.18 m7.11 m
Max vertical wall digging depth5.99 m5.98 m

Engine

Engine modelIsuzu CC-6BG1TKomatsu SAA6D107E-1
EmissionsEU Stage II / US EPA Tier 2EPA Tier 3 and EU Stage 3A emissions equivalent
Cylinders66
Bore105 mm107 mm
Stroke125 mm124 mm
Displacement6.5 L6.7 L
Net power125 kW (168 HP)ISO 9249 and SAE J1349, at 2,100 rpm103 kW (138 HP)ISO 9249 / SAE J1349, at 2000 min-1

Hydraulics

Pump flow424 L/minMaximum, 2 x 212 L/min439 L/min
Max pressure34.3 MPa (350 kgf/cm2)Implement relief valve setting; 38.0 MPa (388 kgf/cm2) with power boost37.3 MPa (380 kg/cm2)
Max pressure, swing34.3 MPa (350 kgf/cm2)Relief valve setting28.9 MPa (295 kg/cm2)Relief valve setting
Max pressure, travel34.3 MPa (350 kgf/cm2)Relief valve setting373 bar37.3 MPa (380 kg/cm2)
Pilot circuit pressure3.9 MPa (40 kgf/cm2)3.2 MPa (33 kg/cm2)
Boom cylinders2 - bore 120 mm, rod 85 mm2 - bore 120 mm, stroke 1,334 mm, rod 85 mm
Arm cylinder1 - bore 135 mm, rod 95 mm1 - bore 135 mm, stroke 1,490 mm, rod 95 mm
Bucket cylinder1 - bore 115 mm, rod 80 mm1 - bore 115 mm, stroke 1,120 mm, rod 80 mm

Undercarriage

Carrier rollers (each side)22
Track rollers (each side)78 on ZX210LC-5G7
Track shoes (each side)4649 on ZX210LC-5G45

Service capacities

Fuel tank400 L400 L
Cooling system23 LEngine coolant20.4 LCoolant, PC200/LC-8M0
Engine oil, with filter25 L23.1 LRefill capacity ("Engine")
Swing drive6.2 LSwing device6.5 L
Final drive (each)6.8 LTravel device, each side3.6 L
Hydraulic tank135 L135 L

Sources: Hitachi ZAXIS-5G series Southeast Asia brochure KA-EN182HMAP-Q (Hitachi Construction Machinery Asia and Pacific, 2019) · Komatsu PC200/LC-8M0, PC220/LC-8M0 brochure ZESS003200-01 (Komatsu Australia, 2015)

Drawn to scale

Side views measured off each maker's dimension drawing, front edges and ground lined up.

0 m1 m2 m3 m4 m5 m6 m7 m8 m9 m
Hitachi ZX200-5GKomatsu PC200Same scale, front edges and ground lined up.

Hitachi ZX200-5G vs Komatsu PC200: questions

Which is bigger, the Hitachi ZX200-5G or Komatsu PC200?

By operating weight the Komatsu PC200 is the biggest at 21.2 t, then the Hitachi ZX200-5G at 19.8 t.

Which has more power, the Hitachi ZX200-5G or Komatsu PC200?

The Hitachi ZX200-5G: Hitachi ZX200-5G 125 kW (168 HP), Komatsu PC200 103 kW (138 HP) (net power), a 21% difference.

Which digs deeper, the Hitachi ZX200-5G or Komatsu PC200?

The Hitachi ZX200-5G: Hitachi ZX200-5G 6.67 m, Komatsu PC200 6.62 m (max digging depth), a 1% difference.

Which reaches further, the Hitachi ZX200-5G or Komatsu PC200?

The Hitachi ZX200-5G: Hitachi ZX200-5G 9.92 m, Komatsu PC200 9.875 m (max digging reach), a 0% difference.

Which turns tighter, the Hitachi ZX200-5G or Komatsu PC200?

The Komatsu PC200: Hitachi ZX200-5G 2.89 m, Komatsu PC200 2.75 m (tail swing radius), a 5% difference.

Which is narrower to transport, the Hitachi ZX200-5G or Komatsu PC200?

The Komatsu PC200: Hitachi ZX200-5G 2.86 m, Komatsu PC200 2.8 m (overall width), a 2% difference.

Where do these figures come from?

Each model's own published spec sheet or brochure, linked under the table. Builds differ by market and year, so confirm the figures for a particular machine with its dealer.

Can I rent or buy these machines in the UAE?

Each model's page lists the ones for hire and for sale on EquipmentsFinder now, with typical prices in AED.

More comparisons

EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.