EF Logo

Cat D6 vs Komatsu D65EX-18

The Cat D6 is the heavier machine, at 22.1 t against 21.3 t, and the Komatsu D65EX-18 has more power (162 kW against 161 kW).

The Cat D6 is ahead on: digs deeper, bigger bucket or body. The Komatsu D65EX-18 is ahead on: more power, more hydraulic flow, bigger fuel tank, faster, narrower to transport, lower to transport.

Below, every figure both makers publish sits side by side, with the Cat D6 and the Komatsu D65EX-18 drawn to the same scale from their dimension drawings.

  1. Cat D6, side view

    Cat · dozer

    Cat D6

    Full specsPDF

  2. Komatsu D65EX-18, side view

    Komatsu · dozer

    Komatsu D65EX-18

    Full specsPDF

  3. Add a model

At a glance

Bold is the machine ahead on each figure, with its lead.

FigureCat D6Komatsu D65EX-18
Operating weight22,130 kg21,270 kg
Net powerHigher is better161 kW162 kW+1%
Digging depthHigher is better0.502 m0.5 m
Blade capacityHigher is better5.7 m³+2%5.61 m³
Pump flowHigher is better204 L/min248 L/min+22%
Fuel tankHigher is better341 L415 L+22%
Travel speed, forward (max)Higher is better10.7 km/h11.3 km/h+6%
Width over tracksLower is better2.54 m2.49 m+2%
Overall height (to top of cab)Lower is better3.188 m3.16 m+1%

All specifications

Every figure the makers publish. Search for one, or show only those that differ.

Dimensions

Overall length (with blade)5.436 mLength of machine, 6 SU blade straight5.49 mSIGMADOZER; 5.68 m with straight tilt blade (PX), 5.79 m with power angle tilt blade
Overall length (base machine)4.73 mLength of machine without blade4.065 mKomatsu letters this dimension H without a name; named here from where its dimension line starts (front of track) and ends (rear of machine)
Overall height (to top of cab)3.188 m3.16 mROPS cab; 3.35 m if Komatsu sweeps are installed
Track gauge1.93 m1.88 mD65EX with outside-mounted blade; 2.05 m on the WX and PX
Width over tracks2.54 m2.49 mTrack gauge plus shoe width (1.88 m + 0.61 m)
Blade width3.312 m6 SU blade, across end bits3.41 mSIGMADOZER; 3.47 m Semi-U, 3.97 m PX straight tilt
Blade height1.408 m6 SU blade1.425 mSIGMADOZER; 1.10 m PX straight tilt
Ground contact length2.964 m2.97 m3.275 m on the D65PX
Ground clearance0.361 m0.415 m
Shoe width0.61 mMaximum track shoe width0.61 mD65EX with outside-mounted blade; 760 mm WX, 915 mm PX
Grouser height0.065 mModerate service0.065 m

Weight

Operating weight22,130 kg21,270 kgD65EX-18 with SIGMADOZER, ROPS cab, standard track, lubricants, coolant, full fuel tank and operator; 22,830 kg D65PX straight tilt, 22,960 kg D65WX
Shipping weight19,178 kg10% fuel18,780 kgTractor with blade lift cylinders, ROPS cab, standard track, lubricants and coolant

Performance

Blade capacity5.7 m³6 SU blade, ISO 9246; 6A angle blade 4.2 m³5.61 m³SIGMADOZER, SAE J1265
Blade lift height1.18 m1.135 mMaximum lift above ground
Digging depth0.502 m0.5 mMaximum drop below ground
Maximum tilt at blade corner0.564 m0.87 m
Ground pressure54 kPaISO 1675450.0 kPa (0.51 kgf/cm2, 7.25 psi)ISO 16754, with SIGMADOZER, ROPS cab, full fluids and operator; 44.1 kPa for the tractor alone on 610 mm shoes
Ground contact area3.992 m²ISO 1675440,910 cm2 (6,341 in2)ISO 16754, 610 mm shoes

Ripper

Ripper maximum penetration0.571 m0.59 mMulti-shank ripper, maximum digging depth (D65EX/WX)

Engine

Engine modelCat C9.3BKomatsu SAA6D114E-6
EmissionsBrazil MAR-1 / UN ECE R96 Stage IIIA (equivalent to U.S. EPA Tier 3 / EU Stage IIIA)U.S. EPA Tier 4 FinalEU Stage V on the European D65EX-18
Net power161 kW (215 hp)At 2,200 rpm, ISO 9249 / SAE J1349162 kW (217 hp)ISO 9249 / SAE J1349, at 1,950 rpm
Gross power190 kW (255 hp)SAE J1995:2014 (ISO 14396: 187 kW)164 kW (220 hp)SAE J1995, at 1,950 rpm
Displacement9.3 L8.9 L

Transmission

TransmissionAutomatic, 3 forward / 3 reverse (half-step ranges)TORQFLOW: 3-element, 1-stage, 2-phase torque converter with lockup clutch; planetary multi-disc power shift, 3 forward / 3 reverse (plus 3rd low)Electronically controlled, hydraulically actuated, force-lubricated; automatic or manual shift modes
Travel speed, forward (max)10.7 km/h3.0 forward11.3 km/h3rd gear
Travel speed, reverse (max)10.7 km/h3.0 reverse13.6 km/h3rd gear

Undercarriage

UndercarriageElevated sprocket, 42 section, 8 bottom rollers (HDXL)Oscillating equalizer bar and pivot shaft; monocoque track roller frame; lubricated rollers and idlersParallel Link Undercarriage System (PLUS), lubricated rotating bushings
Track rollers (each side)878 on the D65PX

Hydraulics

Pump flow204 L/minImplement pump, maximum, 1,750 rpm248 L/minAt rated engine speed
Max pressure276 barImplement relief 27 600 kPa279 barRelief valve setting 27.9 MPa (285 kgf/cm2)

Service capacities

Fuel tank341 L415 L
Cooling system63 L49 L
Engine oil, with filter24.5 LEngine crankcase30.5 L
Final drives (each)18.2 L16.5 LD65EX-18 without PAT; 22 L with PAT, PX and WX

Sources: Cat D6 Track-Type Tractors Technical Specifications AEXQ3981-00 (10-2024), build 20C (Aus-NZ, S Am) · Komatsu America D65EX/PX/WX-18 brochure AESS868-03 (hosted by SMS Equipment)

Drawn to scale

Side views measured off each maker's dimension drawing, front edges and ground lined up.

0 m1 m2 m3 m4 m5 m
Cat D6Komatsu D65EX-18Same scale, front edges and ground lined up.

Cat D6 vs Komatsu D65EX-18: questions

Which is bigger, the Cat D6 or Komatsu D65EX-18?

By operating weight the Cat D6 is the biggest at 22.1 t, then the Komatsu D65EX-18 at 21.3 t.

Which has more power, the Cat D6 or Komatsu D65EX-18?

The Komatsu D65EX-18: Cat D6 161 kW (215 hp), Komatsu D65EX-18 162 kW (217 hp) (net power), a 1% difference.

Which digs deeper, the Cat D6 or Komatsu D65EX-18?

The Cat D6: Cat D6 0.502 m, Komatsu D65EX-18 0.5 m (digging depth), a 0% difference.

Which has the bigger bucket, the Cat D6 or Komatsu D65EX-18?

The Cat D6: Cat D6 5.7 m³, Komatsu D65EX-18 5.61 m³ (blade capacity), a 2% difference.

Which has the bigger fuel tank, the Cat D6 or Komatsu D65EX-18?

The Komatsu D65EX-18: Cat D6 341 L, Komatsu D65EX-18 415 L (fuel tank), a 22% difference.

Which is narrower to transport, the Cat D6 or Komatsu D65EX-18?

The Komatsu D65EX-18: Cat D6 2.54 m, Komatsu D65EX-18 2.49 m (width over tracks), a 2% difference.

Where do these figures come from?

Each model's own published spec sheet or brochure, linked under the table. Builds differ by market and year, so confirm the figures for a particular machine with its dealer.

Can I rent or buy these machines in the UAE?

Each model's page lists the ones for hire and for sale on EquipmentsFinder now, with typical prices in AED.

More comparisons

EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.