EF Logo

Cat D6 vs John Deere 850L

The Cat D6 is the heavier machine, at 22.1 t against 21.6 t, and the John Deere 850L has more power (168 kW against 161 kW).

The Cat D6 is ahead on: bigger bucket or body, more digging or pushing force, more hydraulic flow, lower to transport. The John Deere 850L is ahead on: more power, digs deeper, bigger fuel tank, faster, narrower to transport.

Below, every figure both makers publish sits side by side, with the Cat D6 and the John Deere 850L drawn to the same scale from their dimension drawings.

  1. Cat D6, side view

    Cat · dozer

    Cat D6

    Full specsPDF

  2. John Deere 850L, side view

    John Deere · dozer

    John Deere 850L

    Full specsPDF

  3. Add a model

At a glance

Bold is the machine ahead on each figure, with its lead.

FigureCat D6John Deere 850L
Operating weight22,130 kg21,581 kg
Net powerHigher is better161 kW168 kW+4%
Digging depthHigher is better0.502 m0.596 m+19%
Blade capacityHigher is better5.7 m³+2%5.6 m³
Maximum drawbar pullHigher is better422 kN+16%365 kN
Pump flowHigher is better204 L/min+32%155 L/min
Fuel tankHigher is better341 L439 L+29%
Travel speed, forward (max)Higher is better10.7 km/h11 km/h+3%
Width over tracksLower is better2.54 m2.489 m+2%
Overall height (to top of cab)Lower is better3.188 m+5%3.344 m

All specifications

Every figure the makers publish. Search for one, or show only those that differ.

Dimensions

Overall height (to top of cab)3.188 m3.344 mIncludes antenna base and grouser height, antenna whip removed; 3.438 m with limb risers
Track gauge1.93 m1.88 mXLT with outside dozer blade; 2.134 m XLT with PAT blade
Width over tracks2.54 m2.489 mXLT with 610 mm shoes, outside dozer blade
Blade width3.312 m6 SU blade, across end bits3.266 mSemi-U outside dozer blade; 3.571 m for WLT, 3.875 m for LGP
Blade height1.408 m6 SU blade1.422 mSemi-U outside dozer blade
Ground contact length2.964 m3.3 m
Ground clearance0.361 m0.394 mIn dirt
Shoe width0.61 mMaximum track shoe width0.61 mXLT; 760 mm WLT, 910 mm LGP

Weight

Operating weight22,130 kg21,581 kg850L XLT with outside dozer (semi-U) blade, ROPS, full fuel tank and 79 kg operator; 22,126 kg XLT with PAT blade; up to 23,299 kg for LGP

Performance

Blade capacity5.7 m³6 SU blade, ISO 9246; 6A angle blade 4.2 m³5.6 m³Semi-U outside dozer blade, SAE; PAT blade 3.9 m3
Blade lift height1.18 m1.157 mOutside dozer blade; PAT blade 1.062 m
Digging depth0.502 m0.596 mOutside dozer blade; PAT blade 0.704 m
Maximum tilt at blade corner0.564 m0.807 mUses tilt jack
Ground pressure54 kPaISO 1675447.9 kPa (6.9 psi)XLT with outside dozer blade; 49.1 kPa XLT with PAT blade
Maximum drawbar pull422 kN1.0 forward365 kN
Ground contact area3.992 m²ISO 1675444,115 cm2 (6,838 in2)XLT, 610 mm shoes

Ripper

Ripper maximum penetration0.571 m0.724 m

Engine

Engine modelCat C9.3BJohn Deere PowerTech PSS 6090 (9.0 L)
EmissionsBrazil MAR-1 / UN ECE R96 Stage IIIA (equivalent to U.S. EPA Tier 3 / EU Stage IIIA)EPA Final Tier 4 / EU Stage IV
Net power161 kW (215 hp)At 2,200 rpm, ISO 9249 / SAE J1349168 kW (225 hp)SAE net, at 1,700 rpm; no derating up to 3,050 m
Displacement9.3 L9 L

Transmission

TransmissionAutomatic, 3 forward / 3 reverse (half-step ranges)Automatic dual-path hydrostatic (HST); each track has its own variable-displacement piston pump and motor
Travel speed, forward (max)10.7 km/h3.0 forward11 km/hOperator selectable maximum; 9.7 kph standard forward and reverse
Travel speed, reverse (max)10.7 km/h3.0 reverse11 km/hOperator selectable maximum; reverse speed ratio is operator customizable

Undercarriage

UndercarriageElevated sprocket, 42 section, 8 bottom rollers (HDXL)John Deere DuraTrax: sealed and lubricated links, through-hardened sealed and lubricated rollers, segmented sprockets
Track rollers (each side)88

Hydraulics

Pump flow204 L/minImplement pump, maximum, 1,750 rpm155 L/minAt unloaded high idle
Max pressure276 barImplement relief 27 600 kPa250 barSystem relief 24,993 kPa

Service capacities

Fuel tank341 L439 L
Cooling system63 L39.7 LWith recovery tank
Engine oil, with filter24.5 LEngine crankcase25 L

Sources: Cat D6 Track-Type Tractors Technical Specifications AEXQ3981-00 (10-2024), build 20C (Aus-NZ, S Am) · John Deere 850L dozer brochure DKALDZR850 (deere.com)

Drawn to scale

Side views measured off each maker's dimension drawing, front edges and ground lined up.

0 m1 m2 m3 m4 m5 m
Cat D6John Deere 850LSame scale, front edges and ground lined up.

Cat D6 vs John Deere 850L: questions

Which is bigger, the Cat D6 or John Deere 850L?

By operating weight the Cat D6 is the biggest at 22.1 t, then the John Deere 850L at 21.6 t.

Which has more power, the Cat D6 or John Deere 850L?

The John Deere 850L: Cat D6 161 kW (215 hp), John Deere 850L 168 kW (225 hp) (net power), a 4% difference.

Which digs deeper, the Cat D6 or John Deere 850L?

The John Deere 850L: Cat D6 0.502 m, John Deere 850L 0.596 m (digging depth), a 19% difference.

Which has the bigger bucket, the Cat D6 or John Deere 850L?

The Cat D6: Cat D6 5.7 m³, John Deere 850L 5.6 m³ (blade capacity), a 2% difference.

Which has the bigger fuel tank, the Cat D6 or John Deere 850L?

The John Deere 850L: Cat D6 341 L, John Deere 850L 439 L (fuel tank), a 29% difference.

Which is narrower to transport, the Cat D6 or John Deere 850L?

The John Deere 850L: Cat D6 2.54 m, John Deere 850L 2.489 m (width over tracks), a 2% difference.

Where do these figures come from?

Each model's own published spec sheet or brochure, linked under the table. Builds differ by market and year, so confirm the figures for a particular machine with its dealer.

Can I rent or buy these machines in the UAE?

Each model's page lists the ones for hire and for sale on EquipmentsFinder now, with typical prices in AED.

More comparisons

EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.