EF Logo

Cat D6 vs Cat D7

The Cat D7 is the heavier machine, at 30.7 t against 22.1 t, and the Cat D7 has more power (197 kW against 161 kW).

The Cat D6 is ahead on: narrower to transport, lower to transport. The Cat D7 is ahead on: more power, digs deeper, bigger bucket or body, more digging or pushing force, more hydraulic flow, bigger fuel tank, faster.

Below, every figure both makers publish sits side by side, with the Cat D6 and the Cat D7 drawn to the same scale from their dimension drawings.

  1. Cat D6, side view

    Cat · dozer

    Cat D6

    Full specsPDF

  2. Cat D7, side view

    Cat · dozer

    Cat D7

    Full specsPDF

  3. Add a model

At a glance

Bold is the machine ahead on each figure, with its lead.

FigureCat D6Cat D7
Operating weight22,130 kg30,731 kg
Net powerHigher is better161 kW197 kW+22%
Digging depthHigher is better0.502 m0.58 m+16%
Blade capacityHigher is better5.7 m³7.42 m³+30%
Maximum drawbar pullHigher is better422 kN659 kN+56%
Pump flowHigher is better204 L/min220 L/min+8%
Fuel tankHigher is better341 L465 L+36%
Travel speed, forward (max)Higher is better10.7 km/h11.4 km/h+7%
Width over tracksLower is better2.54 m+9%2.79 m
Overall height (to top of cab)Lower is better3.188 m+7%3.43 m

All specifications

Every figure the makers publish. Search for one, or show only those that differ.

Dimensions

Overall length (with blade)5.436 mLength of machine, 6 SU blade straight5.79 mSU blade, no ripper; U blade 6.03 m
Overall length (base machine)4.73 mLength of machine without blade4.66 mLength of basic tractor
Overall height (to top of cab)3.188 m3.43 m
Track gauge1.93 m1.98 mStandard; LGP 2.24 m
Width over tracks2.54 m2.79 mWidth of tractor without trunnions; LGP 3.15 m
Blade width3.312 m6 SU blade, across end bits3.64 mSU blade, across end bits; U 3926 mm
Blade height1.408 m6 SU blade1.56 mSU and U blade
Ground contact length2.964 m3.02 mLGP 3.24 m
Ground clearance0.361 m0.442 m
Shoe width0.61 mMaximum track shoe width0.61 mStandard; LGP 915 mm
Grouser height0.065 mModerate service0.082 mExtreme service; LGP (moderate service) 74 mm

Weight

Operating weight22,130 kg30,731 kgSU blade, multi-shank ripper, ROPS/FOPS cab, full fuel tank, 75 kg operator
Shipping weight19,178 kg10% fuel27,018 kg10% fuel, with ripper

Performance

Blade capacity5.7 m³6 SU blade, ISO 9246; 6A angle blade 4.2 m³7.42 m³SU blade, ISO 9246; U 8.59 m³
Blade lift height1.18 m1.21 mBlade in neutral tilt
Digging depth0.502 m0.58 mBlade in neutral tilt
Maximum tilt at blade corner0.564 m0.5 mSU blade; U 565 mm
Ground pressure54 kPaISO 1675474.2 kPaISO 16754; LGP 44.5 kPa
Maximum drawbar pull422 kN1.0 forward659 kN1.0 forward
Ground contact area3.992 m²ISO 167544.06 m²ISO 16754; LGP 6.51 m²

Ripper

Ripper maximum penetration0.571 m0.644 m

Engine

Engine modelCat C9.3BCat C9.3B
EmissionsBrazil MAR-1 / UN ECE R96 Stage IIIA (equivalent to U.S. EPA Tier 3 / EU Stage IIIA)U.S. EPA Tier 4 Final / EU Stage V / Japan 2014 / Korea Tier 5 / China Nonroad Stage IV
Net power161 kW (215 hp)At 2,200 rpm, ISO 9249 / SAE J1349197 kW (265 hp)At 2,200 rpm, ISO 9249 / SAE J1349 (268 mhp)
Gross power190 kW (255 hp)SAE J1995:2014 (ISO 14396: 187 kW)233 kW (312 hp)SAE J1995:2014
Displacement9.3 L9.3 L

Transmission

TransmissionAutomatic, 3 forward / 3 reverse (half-step ranges)Fully automatic, 4-speed
Travel speed, forward (max)10.7 km/h3.0 forward11.4 km/h3.0 forward
Travel speed, reverse (max)10.7 km/h3.0 reverse11.4 km/h3.0 reverse

Undercarriage

UndercarriageElevated sprocket, 42 section, 8 bottom rollers (HDXL)41 sections, 8 bottom rollers (LGP: 43 sections, 9 bottom rollers)
Track rollers (each side)88LGP 9

Hydraulics

Pump flow204 L/minImplement pump, maximum, 1,750 rpm220 L/minImplement pump, at 1,900 rpm and 6895 kPa
Max pressure276 barImplement relief 27 600 kPa240 barImplement (lift, tilt and ripper cylinders)

Service capacities

Fuel tank341 L465 L
Cooling system63 L62 L
Engine oil, with filter24.5 LEngine crankcase28 LEngine crankcase
Power train oil148 L187 L
Final drives (each)18.2 L13 L

Service intervals

Coolant12,000 hours12,000 hoursCat ELC (or 6 years)

Sources: Cat D6 Track-Type Tractors Technical Specifications AEXQ3981-00 (10-2024), build 20C (Aus-NZ, S Am) · Cat D7 Track-Type Tractor Technical Specifications AEXQ3734-00 (08-2024), build 17B (Aus-NZ, Chile, China, Europe, Japan, N Am, S Korea, Turkey)

Drawn to scale

Side views measured off each maker's dimension drawing, front edges and ground lined up.

0 m1 m2 m3 m4 m5 m6 m7 m
Cat D6Cat D7Same scale, front edges and ground lined up.

Cat D6 vs Cat D7: questions

Which is bigger, the Cat D6 or Cat D7?

By operating weight the Cat D7 is the biggest at 30.7 t, then the Cat D6 at 22.1 t.

Which has more power, the Cat D6 or Cat D7?

The Cat D7: Cat D6 161 kW (215 hp), Cat D7 197 kW (265 hp) (net power), a 22% difference.

Which digs deeper, the Cat D6 or Cat D7?

The Cat D7: Cat D6 0.502 m, Cat D7 0.58 m (digging depth), a 16% difference.

Which has the bigger bucket, the Cat D6 or Cat D7?

The Cat D7: Cat D6 5.7 m³, Cat D7 7.42 m³ (blade capacity), a 30% difference.

Which has the bigger fuel tank, the Cat D6 or Cat D7?

The Cat D7: Cat D6 341 L, Cat D7 465 L (fuel tank), a 36% difference.

Which is narrower to transport, the Cat D6 or Cat D7?

The Cat D6: Cat D6 2.54 m, Cat D7 2.79 m (width over tracks), a 9% difference.

Where do these figures come from?

Each model's own published spec sheet or brochure, linked under the table. Builds differ by market and year, so confirm the figures for a particular machine with its dealer.

Can I rent or buy these machines in the UAE?

Each model's page lists the ones for hire and for sale on EquipmentsFinder now, with typical prices in AED.

More comparisons

EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.