Cat D7
Show imperial
EquipmentsFinder

Specification sheetIssued 20 November 2026

Cat · dozer

Cat D7

Cat D7 (current generation, C9.3B, fully automatic 4-speed), standard SU/U tractor with SU blade and multi-shank ripper, from the global Technical Specifications AEXQ3734-00 (08-2024), build 17B. It replaces the D7E and the D7R / D7R Series 2.

UAEGlobal

Blade capacity
7.42 m³
power
197 kW (265 hp)
Operating weight
30,731 kg
Blade width
3.64 m
Cat D7, side view with dimensions (illustration)3.43 m5.79 m
Cat D7, front view (illustration)2.79 m

Dimensions

Height (to top of cab)
3.43 m
Height (to top of guardrail)
3.32 m
Ground clearance
0.442 m
Grouser height (Extreme service; LGP (moderate service) 74 mm)
0.082 m
Drawbar (add to basic tractor)
0.276 m
Multi-shank ripper (add to basic tractor)
1.57 m
Winch (add to basic tractor)
0.75 m

Weight

Operating weight (SU blade, multi-shank ripper, ROPS/FOPS cab, full fuel tank, 75 kg operator)
30,731 kg
Operating weight (LGP) (LGP blade, drawbar)
29,589 kg
Shipping weight (10% fuel, with ripper)
27,018 kg
Shipping weight (LGP) (10% fuel, with drawbar)
25,876 kg
Blade weight (SU, with push arms) (U blade 3570 kg)
3,340 kg

Performance

Blade capacity (SU blade, ISO 9246; U 8.59 m³)
7.42 m³
10Blade lift height (Blade in neutral tilt)
1.21 m
9Digging depth (Blade in neutral tilt)
0.58 m
11Maximum tilt at blade corner (SU blade; U 565 mm)
0.5 m
Maximum tilt angle (SU and U blade)
9°
Blade pitch adjustment (Plus/minus)
3°
Ground pressure (ISO 16754; LGP 44.5 kPa)
74.2 kPa
Ground contact area (ISO 16754; LGP 6.51 m²)
4.06 m²
Maximum drawbar pull (1.0 forward)
659 kN
Drawbar pull, 1.5 forward
491 kN
Drawbar pull, 2.0 forward
366 kN
Drawbar pull, 3.0 forward
206 kN

Ripper

Ripper type
Multi-shank, adjustable parallelogram, 3 pockets
Ripper maximum penetration
0.644 m
Ripper maximum penetration force
100 kN
Ripper maximum pryout force (Measured with one shank)
187 kN
Ripper maximum clearance, raised (Shank tip)
0.805 m
Ripper carriage width
2.211 m
Ripper weight (one shank) (Three shanks 3611 kg)
3,307 kg

Engine

Engine model
Cat C9.3B
Emissions
U.S. EPA Tier 4 Final / EU Stage V / Japan 2014 / Korea Tier 5 / China Nonroad Stage IV
Net power (At 2,200 rpm, ISO 9249 / SAE J1349 (268 mhp))
197 kW (265 hp)
Gross power (SAE J1995:2014)
233 kW (312 hp)
Engine power (ISO 14396) (At 1,400 rpm (313 mhp))
230 kW (309 hp)
Displacement
9.3 L
Bore
115 mm
Stroke
149 mm
Altitude without derating (Automatic derating above this altitude)
3,261 m

Transmission

Transmission
Fully automatic, 4-speed
Travel speed, forward (max) (3.0 forward)
11.4 km/h
Travel speed, reverse (max) (3.0 reverse)
11.4 km/h
Travel speed, 1.0 forward
3.5 km/h
Travel speed, 1.5 forward
4.8 km/h
Travel speed, 2.0 forward
6.4 km/h
Travel speed, 2.5 forward
9 km/h
Travel speed, 1.0 reverse
3.5 km/h
Travel speed, 2.0 reverse
6.3 km/h

Undercarriage

Undercarriage
41 sections, 8 bottom rollers (LGP: 43 sections, 9 bottom rollers)
Track rollers (each side) (LGP 9)
8

Hydraulics

Pump type
Piston-type, variable displacement
Pump flow (Implement pump, at 1,900 rpm and 6895 kPa)
220 L/min
Steering pump flow (At 2,364 rpm pump speed and 30 000 kPa)
267 L/min
Max pressure (Implement (lift, tilt and ripper cylinders))
240 bar
Steering pressure
380 bar
Bulldozer relief valve setting
325 bar
Winch pressure
310 bar
Tilt cylinder flow, rod end
132 L/min
Tilt cylinder flow, head end
170 L/min

Winch

Winch model
PA110
Winch weight (With mounting bracket and standard wire rope)
2,046 kg
Winch drum width
0.33 m
Winch cable length (Recommended 29 mm cable; 78 m of 32 mm optional)
55 m

Service capacities

Fuel tank
465 L
Diesel exhaust fluid tank
44 L
Cooling system
62 L
Engine oil, with filter (Engine crankcase)
28 L
Power train oil
187 L
Final drives (each)
13 L
Roller frames (each) (Minimum; maximum 96 L (25.4 gal))
85 L
Pivot shaft compartment
21 L
Hydraulic system
144 L

Sound

Operator sound pressure level (ISO 6396:2008, cab doors and windows closed)
77 dB(A)
Exterior sound pressure level (ISO 6395:2008)
112 dB(A)

Service intervals

Coolant (Cat ELC (or 6 years))
12,000 hours