Specification sheetIssued 20 November 2026
John Deere · dozer
John Deere 850L
John Deere 850L XLT with outside dozer (semi-U) blade and 610 mm shoes (PowerTech PSS 6090, EPA Final Tier 4 / EU Stage IV, ROPS) from Deere's 850L dozer brochure DKALDZR850. Deere's separate 850 P-Tier sheet could not be downloaded, so this 850L sheet is used.
UAEUSAGlobal
- Blade capacity
- 5.6 m³
- power
- 168 kW (225 hp)
- Operating weight
- 21,581 kg
- Blade width
- 3.266 m
3.34 m5.93 m
2.49 mDimensions
- Track gauge (XLT with outside dozer blade; 2.134 m XLT with PAT blade)
- 1.88 m
- Track length on ground
- 3.3 m
- Shoe width (XLT; 760 mm WLT, 910 mm LGP)
- 0.61 m
Weight
- Operating weight (850L XLT with outside dozer (semi-U) blade, ROPS, full fuel tank and 79 kg operator; 22,126 kg XLT with PAT blade; up to 23,299 kg for LGP)
- 21,581 kg
- Ground pressure (XLT with outside dozer blade; 49.1 kPa XLT with PAT blade)
- 47.9 kPa (6.9 psi)
- Blade weight (semi-U) (Outside dozer blade; push-beam assembly without blade 1,782 kg)
- 1,589 kg
- Ripper weight (3-shank)
- 2,155 kg
Engine
- Engine model
- John Deere PowerTech PSS 6090 (9.0 L)
- Emissions
- EPA Final Tier 4 / EU Stage IV
- Aspiration
- Turbocharged, air-to-air aftercooled
- Displacement
- 9 L
- Net power (SAE net, at 1,700 rpm; no derating up to 3,050 m)
- 168 kW (225 hp)
- Max torque (Net peak torque at 1,500 rpm)
- 1,126 Nm
- Cooling
- Variable-speed suction fan with automatic reversing; coolant rated to -37 deg C
Transmission
- Transmission
- Automatic dual-path hydrostatic (HST); each track has its own variable-displacement piston pump and motor
- Travel speed, forward (max) (Operator selectable maximum; 9.7 kph standard forward and reverse)
- 11 km/h
- Travel speed, reverse (max) (Operator selectable maximum; reverse speed ratio is operator customizable)
- 11 km/h
- Maximum drawbar pull
- 365 kN
- Steering
- Single-lever steering, speed and direction control with counter-rotation; HST steering, no steering clutches or brakes
- Final drives
- Double-reduction planetary, mounted independently of track frames and push frames
- System relief pressure (HST) (47,574 kPa)
- 470 bar
Undercarriage
- Undercarriage
- John Deere DuraTrax: sealed and lubricated links, through-hardened sealed and lubricated rollers, segmented sprockets
- Track shoes (each side)
- 45
- Track rollers (each side)
- 8
- Track pitch
- 203 mm
- Ground contact area (XLT, 610 mm shoes)
- 44,115 cm2 (6,838 in2)
Blade
- Blade capacity (Semi-U outside dozer blade, SAE; PAT blade 3.9 m3)
- 5.6 m³
- Blade cutting-edge angle (Outside dozer blade, adjustable; PAT 54.8 deg to 59.9 deg)
- 52.5 deg to 60.5 deg
Ripper
- Ripper type
- Multi-shank (3) parallelogram ripper with hydraulic pitch adjustment, ESCO tips
- Ripper maximum penetration
- 0.724 m
- Ripper maximum clearance under tip
- 0.61 m
- Ripper length, lowered (Raised position 1.525 m)
- 1.626 m
- Ripper beam width
- 2.4 m
- Ripping width
- 2.146 m
- Distance between ripper shanks
- 1.041 m
- Ripper slope angle (full raise)
- 24°
Hydraulics
- System
- Open-centre load-sense with variable-displacement piston pump
- Pump displacement
- 74 cc
- Pump flow (At unloaded high idle)
- 155 L/min
- Max pressure (System relief 24,993 kPa)
- 250 bar
- Differential pressure (1,896 kPa)
- 19 bar
Service capacities
- Fuel tank
- 439 L
- Diesel exhaust fluid tank
- 23.7 L
- Cooling system (With recovery tank)
- 39.7 L
- Engine oil, with filter
- 25 L
- Transmission
- 105 L
- Hydraulic system
- 117 L
Electrical
- Voltage
- 24 V
- Alternator
- 130 A
- Battery
- 950 CCA