Komatsu D65EX-18
Show imperial
EquipmentsFinder

Specification sheetIssued 20 November 2026

Komatsu · dozer

Komatsu D65EX-18

Komatsu D65EX-18 with SIGMADOZER blade (SAA6D114E-6, U.S. EPA Tier 4 Final, ROPS cab, 610 mm shoes) from Komatsu America's D65EX/PX/WX-18 brochure AESS868-03 (06/18, serial 90997 and up, dealer-hosted). D65PX-18 and D65WX-18 figures appear in the notes. Ripper and sound rows come from the Komatsu Europe EU Stage V sheet EENSS20095.

UAEUSAGlobal

Blade capacity
5.61 m³
power
162 kW (217 hp)
Operating weight
21,270 kg
Blade width
3.41 m
Komatsu D65EX-18, side view with dimensions (illustration)3.16 m5.49 m
Komatsu D65EX-18, front view (illustration)2.49 m

Dimensions

Width over tracks (Track gauge plus shoe width (1.88 m + 0.61 m))
2.49 m
Blade width (SIGMADOZER; 3.47 m Semi-U, 3.97 m PX straight tilt)
3.41 m
Blade height (SIGMADOZER; 1.10 m PX straight tilt)
1.425 m
Ground clearance
0.415 m

Weight

Operating weight (D65EX-18 with SIGMADOZER, ROPS cab, standard track, lubricants, coolant, full fuel tank and operator; 22,830 kg D65PX straight tilt, 22,960 kg D65WX)
21,270 kg
Shipping weight (Tractor with blade lift cylinders, ROPS cab, standard track, lubricants and coolant)
18,780 kg
Ground pressure (ISO 16754, with SIGMADOZER, ROPS cab, full fluids and operator; 44.1 kPa for the tractor alone on 610 mm shoes)
50.0 kPa (0.51 kgf/cm2, 7.25 psi)
Blade weight (SIGMADOZER)
2,390 kg

Engine

Engine model
Komatsu SAA6D114E-6
Type
4-cycle, water-cooled, direct injection
Aspiration (KDPF and SCR (DEF) after-treatment)
Variable geometry turbocharged, air-to-air aftercooled, cooled EGR
Emissions (EU Stage V on the European D65EX-18)
U.S. EPA Tier 4 Final
Cylinders
6
Bore x stroke
114 x 144.5 mm
Displacement
8.9 L
Gross power (SAE J1995, at 1,950 rpm)
164 kW (220 hp)
Net power (ISO 9249 / SAE J1349, at 1,950 rpm)
162 kW (217 hp)
Rated engine speed
1,950 rpm
Governor
All-speed and mid-range, electronic
Fan drive
Variable-speed hydraulic, reversible
Lubrication
Gear pump, force lubrication, full-flow filter

Transmission

Transmission (Electronically controlled, hydraulically actuated, force-lubricated; automatic or manual shift modes)
TORQFLOW: 3-element, 1-stage, 2-phase torque converter with lockup clutch; planetary multi-disc power shift, 3 forward / 3 reverse (plus 3rd low)
Travel speed, forward (max) (3rd gear)
11.3 km/h
Travel speed, reverse (max) (3rd gear)
13.6 km/h
Travel speed, 1st forward (Reverse 4.5 kph)
3.7 km/h
Travel speed, 2nd forward (Reverse 6.7 kph)
5.6 km/h
Travel speed, 3rd low forward (Reverse 8.7 kph)
7.3 km/h
Steering (Wet multi-disc pedal-controlled service brakes, spring-actuated and hydraulically released)
Hydrostatic steering system (HSS), PCCS lever; counter-rotation turns
Min turning radius (D65EX-18 with SIGMADOZER; 2.0 m with PAT, 2.2 m D65PX, 2.1 m D65WX)
1.9 m
Final drives
Double-reduction planetary, bolt-on segmented sprocket teeth, triple-labyrinth seals

Undercarriage

Undercarriage (Parallel Link Undercarriage System (PLUS), lubricated rotating bushings)
Oscillating equalizer bar and pivot shaft; monocoque track roller frame; lubricated rollers and idlers
Track shoes (each side) (45 on the D65PX)
42
Track rollers (each side) (8 on the D65PX)
7
Shoe type (610 mm standard on the SIGMADOZER machine; 560 mm with PAT)
Moderate service, PLUS
Ground contact area (ISO 16754, 610 mm shoes)
40,910 cm2 (6,341 in2)

Blade

Blade capacity (SIGMADOZER, SAE J1265)
5.61 m³
Blade lift height (Maximum lift above ground)
1.135 m
Digging depth (Maximum drop below ground)
0.5 m
Maximum tilt at blade corner
0.87 m
Blade pitch angle (SIGMADOZER and straight tilt; 52 deg to 58 deg on PAT)
39 deg to 53 deg

Ripper

Ripper type
Hydraulically controlled parallelogram multi-shank ripper, 3 shanks
Ripper weight (3-shank) (Including hydraulic control unit)
1,920 kg
Ripper lift cylinder
1 - bore 125 mm
Ripper maximum penetration (Multi-shank ripper, maximum digging depth (D65EX/WX))
0.59 m

Hydraulics

System (Spool valves mounted beside the hydraulic tank)
Closed-centre load sensing system (CLSS)
Pump type
Piston-type variable displacement
Pump flow (At rated engine speed)
248 L/min
Max pressure (Relief valve setting 27.9 MPa (285 kgf/cm2))
279 bar
Blade lift cylinders (90 mm on the power angle tilt dozer)
2 - bore 85 mm
Blade tilt cylinder (130 mm on the power angle tilt dozer)
1 - bore 125 mm
Blade angle cylinders (Power angle tilt dozer only)
2 - bore 110 mm

Service capacities

Fuel tank
415 L
Diesel exhaust fluid tank
23.5 L
Cooling system
49 L
Engine oil
30.5 L
Transmission, bevel gear and steering system (Including torque converter)
48 L
Final drives (each) (D65EX-18 without PAT; 22 L with PAT, PX and WX)
16.5 L
Hydraulic system (Refill; add 7 L for the multi-shank ripper)
62 L

Sound

Operator sound pressure level (ISO 6396, EU Stage V machine; the US sheet lists 75 dB operator ear noise for the ROPS cab)
78 dB(A)
Exterior sound power level (2000/14/EC Stage II, EU Stage V machine)
108 dB(A)