Specification sheetIssued 20 November 2026
Komatsu · dozer
Komatsu D65EX-18
Komatsu D65EX-18 with SIGMADOZER blade (SAA6D114E-6, U.S. EPA Tier 4 Final, ROPS cab, 610 mm shoes) from Komatsu America's D65EX/PX/WX-18 brochure AESS868-03 (06/18, serial 90997 and up, dealer-hosted). D65PX-18 and D65WX-18 figures appear in the notes. Ripper and sound rows come from the Komatsu Europe EU Stage V sheet EENSS20095.
UAEUSAGlobal
- Blade capacity
- 7.34 yd3
- power
- 217 hp
- Operating weight
- 46,892 lb
- Blade width
- 11'2"
10.4 ft18 ft
8.2 ftDimensions
- Width over tracks (Track gauge plus shoe width (1.88 m + 0.61 m))
- 8'2"
- Blade width (SIGMADOZER; 3.47 m Semi-U, 3.97 m PX straight tilt)
- 11'2"
- Blade height (SIGMADOZER; 1.10 m PX straight tilt)
- 4'8"
- Ground clearance
- 16"
Weight
- Operating weight (D65EX-18 with SIGMADOZER, ROPS cab, standard track, lubricants, coolant, full fuel tank and operator; 22,830 kg D65PX straight tilt, 22,960 kg D65WX)
- 46,892 lb
- Shipping weight (Tractor with blade lift cylinders, ROPS cab, standard track, lubricants and coolant)
- 41,403 lb
- Ground pressure (ISO 16754, with SIGMADOZER, ROPS cab, full fluids and operator; 44.1 kPa for the tractor alone on 610 mm shoes)
- 50.0 kPa (0.51 kgf/cm2, 7.25 psi)
- Blade weight (SIGMADOZER)
- 5,260 lb
Engine
- Engine model
- Komatsu SAA6D114E-6
- Type
- 4-cycle, water-cooled, direct injection
- Aspiration (KDPF and SCR (DEF) after-treatment)
- Variable geometry turbocharged, air-to-air aftercooled, cooled EGR
- Emissions (EU Stage V on the European D65EX-18)
- U.S. EPA Tier 4 Final
- Cylinders
- 6
- Bore x stroke
- 114 x 144.5 mm
- Displacement
- 540 in3
- Gross power (SAE J1995, at 1,950 rpm)
- 220 hp
- Net power (ISO 9249 / SAE J1349, at 1,950 rpm)
- 217 hp
- Rated engine speed
- 1,950 rpm
- Governor
- All-speed and mid-range, electronic
- Fan drive
- Variable-speed hydraulic, reversible
- Lubrication
- Gear pump, force lubrication, full-flow filter
Transmission
- Transmission (Electronically controlled, hydraulically actuated, force-lubricated; automatic or manual shift modes)
- TORQFLOW: 3-element, 1-stage, 2-phase torque converter with lockup clutch; planetary multi-disc power shift, 3 forward / 3 reverse (plus 3rd low)
- Travel speed, forward (max) (3rd gear)
- 7.0 mph
- Travel speed, reverse (max) (3rd gear)
- 8.5 mph
- Travel speed, 1st forward (Reverse 4.5 kph)
- 2.3 mph
- Travel speed, 2nd forward (Reverse 6.7 kph)
- 3.5 mph
- Travel speed, 3rd low forward (Reverse 8.7 kph)
- 4.5 mph
- Steering (Wet multi-disc pedal-controlled service brakes, spring-actuated and hydraulically released)
- Hydrostatic steering system (HSS), PCCS lever; counter-rotation turns
- Min turning radius (D65EX-18 with SIGMADOZER; 2.0 m with PAT, 2.2 m D65PX, 2.1 m D65WX)
- 6'3"
- Final drives
- Double-reduction planetary, bolt-on segmented sprocket teeth, triple-labyrinth seals
Undercarriage
- Undercarriage (Parallel Link Undercarriage System (PLUS), lubricated rotating bushings)
- Oscillating equalizer bar and pivot shaft; monocoque track roller frame; lubricated rollers and idlers
- Track shoes (each side) (45 on the D65PX)
- 42
- Track rollers (each side) (8 on the D65PX)
- 7
- Shoe type (610 mm standard on the SIGMADOZER machine; 560 mm with PAT)
- Moderate service, PLUS
- Ground contact area (ISO 16754, 610 mm shoes)
- 40,910 cm2 (6,341 in2)
Blade
- Blade capacity (SIGMADOZER, SAE J1265)
- 7.34 yd3
- Blade lift height (Maximum lift above ground)
- 3'9"
- Digging depth (Maximum drop below ground)
- 1'8"
- Maximum tilt at blade corner
- 2'10"
- Blade pitch angle (SIGMADOZER and straight tilt; 52 deg to 58 deg on PAT)
- 39 deg to 53 deg
Ripper
- Ripper type
- Hydraulically controlled parallelogram multi-shank ripper, 3 shanks
- Ripper weight (3-shank) (Including hydraulic control unit)
- 4,233 lb
- Ripper lift cylinder
- 1 - bore 125 mm
- Ripper maximum penetration (Multi-shank ripper, maximum digging depth (D65EX/WX))
- 1'11"
Hydraulics
- System (Spool valves mounted beside the hydraulic tank)
- Closed-centre load sensing system (CLSS)
- Pump type
- Piston-type variable displacement
- Pump flow (At rated engine speed)
- 65.5 gal/min
- Max pressure (Relief valve setting 27.9 MPa (285 kgf/cm2))
- 4,050 psi
- Blade lift cylinders (90 mm on the power angle tilt dozer)
- 2 - bore 85 mm
- Blade tilt cylinder (130 mm on the power angle tilt dozer)
- 1 - bore 125 mm
- Blade angle cylinders (Power angle tilt dozer only)
- 2 - bore 110 mm
Service capacities
- Fuel tank
- 109.6 gal
- Diesel exhaust fluid tank
- 6.2 gal
- Cooling system
- 12.9 gal
- Engine oil
- 8.1 gal
- Transmission, bevel gear and steering system (Including torque converter)
- 12.7 gal
- Final drives (each) (D65EX-18 without PAT; 22 L with PAT, PX and WX)
- 4.4 gal
- Hydraulic system (Refill; add 7 L for the multi-shank ripper)
- 16.4 gal
Sound
- Operator sound pressure level (ISO 6396, EU Stage V machine; the US sheet lists 75 dB operator ear noise for the ROPS cab)
- 78 dB(A)
- Exterior sound power level (2000/14/EC Stage II, EU Stage V machine)
- 108 dB(A)