EF Logo

excavatormade by CatUAE, USA, Global

Cat 390FSpecs, weight and dimensions

Weight
86.8 t
86,840 kg
Dig depth
7.16 m
Est. new price
~$955k

Quick answer

The Cat 390F is an 86.8-tonne excavator with a Cat C18 ACERT engine rated at 391 kW (524 hp / 532 PS). It digs to 7.16 m, reaches 12.23 m, dumps at up to 7.99 m and works a 6 m³ bucket. It suits digging foundations and trenches, loading dump trucks and demolition with a breaker. Its rivals include the Cat 395 (94.1 t) and the SANY SY500H (54.5 t).

Cat 390F (illustration)

How much does a Cat 390F weigh?

The Cat 390F weighs 86.8 tonnes (86,840 kg, 198,070 lb) in working order, with fuel, operator and standard attachment. That is 8% lighter than the Cat 395 (94.1 t) and 59% heavier than the SANY SY500H (54.5 t). The figures are from Cat 390F L Hydraulic Excavator flyer AEXQ1913 (AME, CIS, APD, AmS; 2016).

What engine is in the Cat 390F?

The Cat 390F has a Cat C18 ACERT engine rated at 391 kW (524 hp / 532 PS) net, SAE J1349 / ISO 9249. It displaces 18.1 L (1,104.5 in³). Emissions: U.S. EPA Tier 2 / EU Stage II equivalent or Tier 3 / Stage IIIA equivalent. The fuel tank holds 1,240 L (328 gal) and the engine takes 60 L (16 gal) of oil.

Cat fault codes

How deep can a Cat 390F dig?

The Cat 390F digs to 7.16 m, reaches 12.23 m, dumps at up to 7.99 m and works a 6 m³ bucket. In imperial units the digging depth is 23'6". On the same row of their sheets, the Cat 395 shows 7.19 m and the SANY SY500H shows 8.255 m.

What are the Cat 390F dimensions?

The Cat 390F is 13.69 m (44 ft 11 in) long, 4.41 m (14 ft 6 in) wide and 3.65 m (12 ft) high. As it stands it is too big for the door of a standard shipping container. The Cat 395 is 13.98 m long, 4.45 m wide and 3.67 m high.

Cat 390F vs Cat 395: what is the difference?

The Cat 390F is 8% lighter than the Cat 395: 86.8 t against 94.1 t. The Cat 390F dumps higher (7.99 m against 7.96 m), carries more fuel (1,240 L against 1,220 L) and turns tighter (4.7 m against 4.84 m). The Cat 395 has more power (404 kW against 391 kW), digs deeper (7.19 m against 7.16 m) and reaches further (12.26 m against 12.23 m).

Cat 390F dimensions

Cat 390F, side view with dimensions (illustration)3.65 m5.12 m13.7 m
Side view
Cat 390F, front view (illustration)4.41 m
Front view
Overall height
3.65 m
Track on ground
5.12 m
Overall length
13.7 m
Overall width
4.41 m

Illustration; figures from the maker's sheet.

How big is the Cat 390F?

Drawn to one scale from the maker’s dimension drawing, on one ground line.

Cat 390F drawn to scale beside a person, a pickup truck and a 40 ft container. The Cat 390F is 13.69 m long - about 1.1 forty-foot containers - and 3.65 m tall, 2.1 times a person's height.Cat 390F13.69 × 3.65 mPerson1.75 m tallPickup truck5.3 × 1.8 m40 ft container12.19 × 2.59 m
The Cat 390F is 13.69 m long - about 1.1 forty-foot containers - and 3.65 m tall, 2.1 times a person's height.

Cat 390F specifications

Figures are the maker's unless marked: est. is our estimate, and any figure from another site names it. Each links to where it came from. Sheet last updated 3 November 2026.

52 figures in 7 groups, each with its source

Dimensions

Dimensions, part 1 of 2
FigureValue (metric)Source
Overall height (to top of boom)4.89 m[1] p.2
Overall height (to top of cab)3.65 mCab height[1] p.2
Handrail height3.83 m[3] p.20
Overall length13.69 m[1] p.2
Tail swing radius4.7 m[1] p.2
Track length on ground5.12 m[1] p.2
Track length6.358 m[1] p.2
Dimensions, part 2 of 2
FigureValue (metric)Source
Ground clearance (minimum)0.9 m[1] p.2
Track gauge2.75 m[1] p.2
Track gauge, extended3.51 m[3] p.20
Overall width4.41 m[1] p.2
Overall width, 650 mm shoes4.16 m[1] p.2
Ground clearance, counterweight1.64 m[1] p.2
Shoe width0.65 mShoes of the operating-weight configuration[1] p.2

Performance

Performance, part 1 of 2
FigureValue (metric)Source
Max digging depth7.16 m[1] p.2
Max reach at ground level12.23 m[1] p.2
Max digging height12.36 m[1] p.2
Max dumping height7.99 m[1] p.2
Min loading height3.68 m[1] p.2
Max depth cut for 2,440 mm level bottom7.02 m[1] p.2
Max vertical wall digging depth4.53 m[1] p.2
Performance, part 2 of 2
FigureValue (metric)Source
Bucket capacity6 m³[1] p.2
Bucket digging force470 kN[3] p.21
Arm digging force356 kN[3] p.21
Swing speed6.2 rpm[1] p.2
Max swing torque260 kN·m[1] p.2
Travel speed (high)4.5 km/hMaximum travel speed[1] p.2
Max drawbar pull590 kN[1] p.2

Weight

Weight
FigureValue (metric)Source
Operating weight86,840 kg[1] p.2

Engine

Engine, part 1 of 2
FigureValue (metric)Source
Engine modelCat C18 ACERT[1] p.2
Cylinders6Inline; from Cat's C18 industrial engine spec sheet (same C18 block)[4]
EmissionsU.S. EPA Tier 2 / EU Stage II equivalent or Tier 3 / Stage IIIA equivalent[1] p.2
Gross power405 kW (543 hp / 551 PS)ISO 14396[1] p.2
Engine, part 2 of 2
FigureValue (metric)Source
Net power391 kW (524 hp / 532 PS)SAE J1349 / ISO 9249[1] p.2
Bore145 mm[1] p.2
Stroke183 mm[1] p.2
Displacement18.1 L[1] p.2

Hydraulics

Hydraulics, part 1 of 2
FigureValue (metric)Source
Pump flow952 L/minMain system, maximum flow (total)[1] p.2
Max flow, travel1,064 L/min[1] p.2
Max pressure35 000 kPaEquipment[1] p.2
Max pressure, travel35 000 kPa[1] p.2
Max pressure, swing35 000 kPa[1] p.2
Hydraulics, part 2 of 2
FigureValue (metric)Source
Pilot system max flow67 L/min[1] p.2
Pilot system max pressure4 400 kPa[1] p.2
Boom cylinders2 - bore 210 mm x stroke 1,967 mmTwo boom cylinders per the sheet's component weights (p.22); from the EU Stage IV Czech edition (Zeppelin); same 390F L machine[3] p.19
Arm cylinderbore 220 mm x stroke 2,262 mmfrom the EU Stage IV Czech edition (Zeppelin); same 390F L machine[3] p.19
Bucket cylinderbore 220 mm x stroke 1,586 mmJC linkage (M2.92 JC stick); from the EU Stage IV Czech edition (Zeppelin); same 390F L machine[3] p.19

Undercarriage

Undercarriage
FigureValue (metric)Source
Track shoes (each side)51from the EU Stage IV Czech edition (Zeppelin); same 390F L machine[3] p.19
Track rollers (each side)9from the EU Stage IV Czech edition (Zeppelin); same 390F L machine[3] p.19
Carrier rollers (each side)3from the EU Stage IV Czech edition (Zeppelin); same 390F L machine[3] p.19

Sound

Sound
FigureValue (metric)Source
Operator sound level74 dB(A)SAE J1166 / ISO 6396[1] p.2
Exterior sound level109 dB(A)ISO 6395[1] p.2

Build: Cat 390F L - the 390-class model Al-Bahar sells in the UAE/GCC (Cat C18 ACERT, U.S. EPA Tier 2 / EU Stage II or Tier 3 / Stage IIIA equivalent, AME build); figures from Cat's 2016 flyer AEXQ1913 for the 7.25 m Mass boom, M2.92 stick and 6.0 m³ bucket.

  1. [1]Cat 390F L Hydraulic Excavator flyer AEXQ1913 (AME, CIS, APD, AmS; 2016)
  2. [2]Al-Bahar (Cat dealer, UAE) product page for the 390F - links the flyer above
  3. [3]Cat 390F L Hydraulic Excavator specifications, Czech edition (EU Stage IV, 2014), Zeppelin dealer copy - used for the dimension-drawing and working-range numbers, handrail height, extended gauge and digging forces
  4. [4]Cat C18 (<560 kW) industrial diesel engine spec sheet LEHH0595-00 (Zeppelin copy) - cylinder count

Cat 390F service

What each system holds and when Cat says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.

Loading the 3D machine...

Drag to turn · scroll to zoom · built from the maker's drawing; markers show where each system is

  1. Engine oil
    60 L

    Fluid: Cat DEO-ULS or Cat DEO SAE 15W-40 (-10 to 50 °C) (Cat Machine Fluids Recommendations SEBU6250-30)

    The C18 runs near full load loading trucks all shift; overdue oil shows up as bearing and liner wear on an engine that is expensive to rebuild.

Confirm fluid grades in your machine's operator's manual: they vary by build year and climate.

Service capacities

Fuel tank
1,240 L328 gal
Cooling system
74 L20 gal
Engine oil
60 L16 gal
Swing drive (each)
19 L5.0 gal
Final drive (each)
21 L5.5 gal
Hydraulic system, with tank
997 L263 gal
Hydraulic tank
813 L215 gal

Service intervals

Hydraulic oil
6,000 hours
Coolant
12,000 hours

Cat 390F against its rivals

The excavators nearest in weight from other makers, figure by figure, each shown at the same scale.

Cat 390F, Cat 395, SANY SY500H, Hitachi ZX490LCH: specifications side by side
FigureCat 390Fthis pageCat 395 specsSANY SY500H specsHitachi ZX490LCH specs
Operating weight86,840 kg94,100 kg54,500 kg49,400 kg
Gross power405 kW (543 hp / 551 PS)405 kW (543 hp)298 kW (400 hp)270 kW (362 hp)
Max digging depth7.16 m7.19 m8.255 m7.77 m
Max reach at ground level12.23 m12.26 m12.537 m11.84 m
Max dumping height7.99 m7.96 m7.843 m7.65 m
Bucket capacity6 m³6.5 m³2.38 m³1.9 m³
Bucket digging force470 kN497 kN275 kN296 kN
Pump flow952 L/min1,064 L/min720 L/min800 L/min
Fuel tank1,240 L1,220 L680 L675 L
Every figureFull sheet

Underlined: the figure that leads its row. Weight has no better way, so it is never marked. All figures are the makers' own.

  • Pick the Cat 390F if you need more gross power (405 kW), a higher dump (7.99 m) and a bigger fuel tank (1,240 L).
  • Pick the Cat 395 if you need a bigger bucket (6.5 m³), more digging force (497 kN) and more hydraulic flow (1,064 L/min).
  • Pick the SANY SY500H if you need a deeper dig (8.255 m) and longer reach (12.537 m).
  • Pick the Hitachi ZX490LCH if the lightest machine matters: at 49.4 t it weighs the least of the 4, and it leads no other figure here.

Cat 390F prices and listings in the UAE

Asking prices on EquipmentsFinder, in AED, refreshed daily.

A new Cat 390F costs about $950,000 to $960,000 (USD), base machine before options, freight and tax - an estimate from published estimates, checked November 2026. Sources: equipbook.ai.

Cat 390F on EquipmentsFinder in the UAE now: none for rent, 1 listed for sale. Too few carry a price to give a Cat 390F range, so the figure below is for all excavators.

See all 1

Typical asking price, usedmedian of 24

AED 85,000

No priced Cat 390F for sale yet: this is all excavators

Low AED 32,000High AED 285,000

Who is asking for excavators in the UAE

Contractors posted 48 requests for excavators on the EquipmentsFinder Inquiry Board in the last 12 months. Most were for Dubai (28), Abu Dhabi (11) and Fujairah (3). Requests name a kind of machine, not a model, so this counts every excavator, the Cat 390F among them.

Requests, last 12 months
48
For Dubai
28
For Abu Dhabi
11
  • 20 Ton Wheel Excavator Required For Purchase19 November 2026
  • 20 ton Tracked excavator pre-fitted with hydraulic vibratory roller Required For RentAbu Dhabi / 17 November 2026
  • 85 Ton Excavator with 26m Boom Required For RentDubai / 16 November 2026

Open excavator requests on the Inquiry BoardPost a request for a Cat 390F

Does a Cat 390F fit in a shipping container?

The machine as it stands on the sheet. Your haulier or forwarder confirms the load.

No. As it stands on the sheet the Cat 390F is 4.41 m wide against a 2.34 m door opening, 3.65 m high against a 2.28 m door and 13.69 m long against 12.03 m inside of a standard container, so it ships on a flat rack, by RoRo or as break-bulk unless it is stripped down.

Length
13.69 m
Width
4.41 m
Height
3.65 m
Weight
86.8 t

Container figures: door opening 2.34 m wide by 2.28 m high, 5.9 m inside a 20 ft box and 12.03 m inside a 40 ft one (Hapag-Lloyd container specification). A size check only: payload is on each container's plate. Trailer class and road permits depend on the haulier and the route, so they are not given here.

Tools for a Cat 390F

For the people who run one: codes, charts and calculators that fit an excavator.

Same class: 50 ton and larger excavators

50 ton and larger excavators with an operating weight of 45 t and up, lightest first. The Cat 390F is 8 of 10; every figure is the maker's.

  1. 2Cat 34948.1 t
  2. 3Volvo EC48048.5 t
  3. 4Hitachi ZX490LCH49.4 t
  4. 5Cat 35249.9 t
  5. 6SANY SY500H54.5 t
  6. 7Cat 37474 t
  7. 8Cat 390FThis page86.8 t
  8. 9Cat 39594.1 t
  9. 10Liebherr R 9300252 t

Showing 2 to 10 of 10, the machines nearest the Cat 390F by operating weight.

Popular Cat excavator models

Cat 390F fault codes and serial number

All Cat fault codesFind the year from a Cat serial number

More Cat 390F questions

How much horsepower does the Cat 390F have?

524 hp (391 kW) net, SAE J1349 / ISO 9249.

What size bucket does a Cat 390F take?

6 m³ (7.84 yd³) is the bucket the maker quotes its figures with; other sizes fit.

How far can a Cat 390F reach?

Its maximum reach at ground level is 12.23 m (40'1").

How tall is a Cat 390F?

3.65 m (12 ft) overall.

How wide is a Cat 390F?

4.41 m (14 ft 6 in) overall.

How high can a Cat 390F dig?

Its maximum digging height is 12.36 m (40'7").

What is the tail swing radius of a Cat 390F?

4.7 m (15'5").

What is the hydraulic flow of a Cat 390F?

952 L/min (251 gal/min), main system, maximum flow (total).

What are the Cat 390F's main competitors?

The machines nearest it in size are the Cat 395, the Cat 374 and the SANY SY500H. Each has a side-by-side comparison on EquipmentsFinder.

Is the Cat 390F sold in the UAE?

Yes. The Cat 390F is sold in the UAE, the USA and other markets worldwide; builds can differ by market, so check emissions and options with the dealer.

What is a Cat 390F used for?

A crawler excavator: a digging arm and bucket on a cab that turns all the way round, on tracks for grip and stability. Typical jobs: digging foundations and trenches, loading dump trucks, demolition with a breaker, lifting pipes into trenches.

Embed this spec card

The Cat 390F's key figures as a small card for your own page. Copy the code and paste it where the card should go; the card stays up to date with the sheet here.

<iframe src="https://www.equipmentsfinder.com/embed/models/cat-390" title="Cat 390F specs" width="100%" height="480" style="border:0;max-width:480px" loading="lazy"></iframe>
<p style="font-size:12px"><a href="https://www.equipmentsfinder.com/models/cat-390">Cat 390F specs</a> by <a href="https://www.equipmentsfinder.com">EquipmentsFinder</a></p>

Calculators and other cards to embed are in the embed kit.

Need a Cat 390F on site?

Post the job: where, when and for how long. Suppliers with a machine contact you directly. Free to post.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.