EF Logo

excavatormade by LiebherrGlobal

Liebherr R 9300Specs, weight and dimensions

Weight
252 t
252,000 kg
Dig depth
8.3 m
27 ft 2 in
Bucket
16.5 m³
21.58 yd3

Quick answer

The Liebherr R 9300 is a 252-tonne excavator with a Cummins QSK38 engine rated at 1,007 kW (1,350 hp). It digs to 8.3 m, reaches 15.6 m, dumps at up to 9.9 m and works a 16.5 m³ bucket. It suits digging foundations and trenches, loading dump trucks and demolition with a breaker. Nearest in weight are the Cat 395 (94.1 t) and the Cat 390F (86.8 t).

Liebherr R 9300 (illustration)

How much does a Liebherr R 9300 weigh?

The Liebherr R 9300 weighs 252 tonnes (252,000 kg, 278 US tons) in working order, with fuel, operator and standard attachment. That is 168% heavier than the Cat 395 (94.1 t) and 190% heavier than the Cat 390F (86.8 t). It puts 2.10 kg/cm2 with 850 mm pads (ISO 16754) of pressure on the ground.

What engine is in the Liebherr R 9300?

The Liebherr R 9300 is offered with Cummins QSK38, 12-cylinder V (US EPA Tier 4f / EU Stage V). The sheet's power figure is 1,007 kW (1,350 hp) gross (SAE J1995 at 1,800 rpm). It displaces 37.8 L (2,307 in3). Emissions: US EPA Tier 4f / EU Stage V (or fuel-consumption-optimised setting).

Cummins fault codes

How deep can a Liebherr R 9300 dig?

The Liebherr R 9300 digs to 8.3 m, reaches 15.6 m, dumps at up to 9.9 m and works a 16.5 m³ bucket. In imperial units the digging depth is 27 ft 2 in. The sheet notes: mono boom 9.00 m, stick 4.00 m. On the same row of their sheets, the Cat 395 shows 7.19 m and the Cat 390F shows 7.16 m.

What are the Liebherr R 9300 dimensions?

The Liebherr R 9300 is 17.40 m (57 ft 1 in) long, 7.59 m (24 ft 11 in) wide and 7.36 m (24 ft 2 in) high. As it stands it is too big for the door of a standard shipping container. The Cat 395 is 13.98 m long, 4.45 m wide and 3.67 m high.

Liebherr R 9300 vs Cat 395: what is the difference?

The Liebherr R 9300 is 168% heavier than the Cat 395: 252 t against 94.1 t. The Liebherr R 9300 has more gross power (1,007 kW against 405 kW), digs deeper (8.3 m against 7.19 m) and reaches further (15.6 m against 12.26 m). Both sets of figures are the makers’ own, for the builds on our sheets.

Liebherr R 9300 dimensions

Liebherr R 9300, side view with dimensions (illustration)7.36 m6.2 m17.4 m
Side view
Liebherr R 9300, front view (illustration)7.59 m
Front view
Overall height
7.36 m
Track on ground
6.2 m
Overall length
17.4 m
Overall width
7.59 m

Illustration; figures from the maker's sheet.

How big is the Liebherr R 9300?

Drawn to one scale from the maker’s dimension drawing, on one ground line.

Liebherr R 9300 drawn to scale beside a person, a pickup truck and a 40 ft container. The Liebherr R 9300 is 17.4 m long - about 1.4 forty-foot containers - and 7.36 m tall, 4.2 times a person's height.Liebherr R 930017.4 × 7.36 mPerson1.75 m tallPickup truck5.3 × 1.8 m40 ft container12.19 × 2.59 m
The Liebherr R 9300 is 17.4 m long - about 1.4 forty-foot containers - and 7.36 m tall, 4.2 times a person's height.

Liebherr R 9300 specifications

Every figure is the maker's, with the document and page it came from. Sheet last updated 17 November 2026.

47 figures in 6 groups, each with its source

Dimensions

Dimensions, part 1 of 2
FigureValue (metric)Source
Overall length17.4 mBackhoe configuration, transport[1] p.26
Overall height (to top of boom)7.45 m[1] p.26
Overall height (to top of cab)7.36 m[1] p.26
Overall width7.59 m[1] p.26
Swing centre to rear end6.014 m[1] p.26
Tail swing radius6.014 mSame figure as swing centre to rear end (D)[1] p.26
Swing centre to front of upperstructure2.26 m[1] p.26
Height to top of counterweight4.64 m[1] p.26
Ground clearance, counterweight2.38 m[1] p.26
Dimensions, part 2 of 2
FigureValue (metric)Source
Ground clearance, upperstructure2.222 m[1] p.26
Ground clearance (minimum)0.894 m[1] p.26
Tumbler distance6.203 m[1] p.26
Track length8.06 m[1] p.26
Length, undercarriage front to counterweight rear10.044 m[1] p.26
Track gauge5 m[1] p.26
Shoe width0.85 m[1] p.26
Operator's eye level6.316 m[1] p.26

Performance

Performance, part 1 of 2
FigureValue (metric)Source
Max digging depth8.3 mMono boom 9.00 m, stick 4.00 m[1] p.27
Max reach at ground level15.6 m[1] p.27
Max dumping height9.9 m[1] p.27
Max digging height14.9 mMax teeth height[1] p.27
Bucket capacity16.5 m³[1] p.27
Performance, part 2 of 2
FigureValue (metric)Source
Max digging force (ISO 6015)810 kN[1] p.27
Max breakout force (ISO 6015)885 kN[1] p.27
Swing speed0-4.0 rpm[1] p.24
Travel speed (high)2.4 km/hTravel speed 0-2.4 km/h[1] p.25
Ground pressure2.10 kg/cm2 with 850 mm pads (ISO 16754)[1] p.27

Weight

Weight
FigureValue (metric)Source
Operating weight252,000 kg[1] p.27

Engine

Engine, part 1 of 2
FigureValue (metric)Source
Engine modelCummins QSK38, 12-cylinder V (US EPA Tier 4f / EU Stage V)[1] p.24
Bore159 mm[1] p.24
Stroke159 mm[1] p.24
EmissionsUS EPA Tier 4f / EU Stage V (or fuel-consumption-optimised setting)[1] p.24
Gross power1,007 kW (1,350 hp)SAE J1995 at 1,800 rpm[1] p.24
Engine, part 2 of 2
FigureValue (metric)Source
Displacement37.8 L[1] p.24
Electric drive motor (option)850 kW (1,139 hp)[1] p.24
Batteries4 x 180 Ah / 12 V (24 V system)[1] p.24
Alternator24 V / 260 A[1] p.24

Hydraulics

Hydraulics, part 1 of 2
FigureValue (metric)Source
Pump flow2,048 L/min[1] p.24
Swing pump flow640 L/min1 reversible swashplate pump, closed-loop swing circuit[1] p.24
Max pressure350 bar[1] p.24
Hydraulics, part 2 of 2
FigureValue (metric)Source
Max pressure, swing350 bar[1] p.24
Max pressure, travel350 barAttachment and travel share the same four pumps and 350 bar circuit[1] p.24

Undercarriage

Undercarriage, part 1 of 2
FigureValue (metric)Source
Track rollers (each side)8[1] p.25
Carrier rollers (each side)2[1] p.25
Track componentsBMP 350, maintenance-free, forged double grouser pad[1] p.25
Undercarriage, part 2 of 2
FigureValue (metric)Source
Track adjusterHydraulic and grease tensioner[1] p.25
Travel drive1 axial piston motor and 1 planetary reduction gear per side frame; hydraulically actuated multi-disc parking brake[1] p.25

Build: Liebherr R 9300 G8 (Generation 8) 250 t mining excavator, diesel Cummins QSK38 version in backhoe configuration, from Liebherr's own R 9300 G8 brochure (assets-cdn.liebherr.com); dimension letters are from the backhoe drawing on p.26. Liebherr's electric-drive version (R 9300 G8-E, 850 kW motor) shares this brochure and platform; its figures are not given separately, so only the motor rating is listed.

  1. [1]Liebherr Brochure R 9300 G8 (Mining excavator R 9300), technical data pp.24-27
  2. [2]Liebherr R 9300 G8 product page (Liebherr Canada)

Liebherr R 9300 service

What each system holds and when Liebherr says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.

Loading the 3D machine...

Drag to turn · scroll to zoom · built from the maker's drawing; markers show where each system is

  1. The Cummins QSK38 is a 38-litre engine; check the oil and coolant daily at the service flap.

Confirm fluid grades in your machine's operator's manual: they vary by build year and climate.

Service capacities

Fuel tank
4,500 L1,189 gal
DEF tank
665 L176 gal
Hydraulic tank
1,800 L475 gal
Hydraulic system, with tank
3,400 L900 gal
Central grease container, attachment and swing ring bearing
340 L90 gal
Central grease container, swing ring teeth
20 L5.3 gal

Liebherr R 9300 against its rivals

The excavators nearest in weight from other makers, figure by figure, each shown at the same scale.

Liebherr R 9300, Cat 395, Cat 390F, Cat 374: specifications side by side
FigureLiebherr R 9300this pageCat 395 specsCat 390F specsCat 374 specs
Operating weight252,000 kg94,100 kg86,840 kg74,000 kg
Gross power1,007 kW (1,350 hp)405 kW (543 hp)405 kW (543 hp / 551 PS)359 kW (481 hp)
Max digging depth8.3 m7.19 m7.16 m7.66 m
Max reach at ground level15.6 m12.26 m12.23 m11.47 m
Max dumping height9.9 m7.96 m7.99 m7.05 m
Bucket capacity16.5 m³6.5 m³6 m³4.4 m³
Bucket digging forcenot on its sheet497 kN470 kN405 kN
Pump flow2,048 L/min1,064 L/min952 L/min896 L/min
Fuel tank4,500 L1,220 L1,240 L920 L
Every figureFull sheet

Underlined: the figure that leads its row. Weight has no better way, so it is never marked. All figures are the makers' own.

  • Pick the Liebherr R 9300 if you need more gross power (1,007 kW), a deeper dig (8.3 m) and longer reach (15.6 m).
  • Pick the Cat 395 if you need more digging force (497 kN).
  • Pick the Cat 374 if the lightest machine matters: at 74 t it weighs the least of the 4, and it leads no other figure here.

Liebherr R 9300 prices and listings in the UAE

Asking prices on EquipmentsFinder, in AED, refreshed daily.

Typical hire, per daymedian of 28

AED 1,225 /day

No priced Liebherr R 9300 for hire yet: this is all excavators

Low AED 800High AED 1,800

No Liebherr R 9300 for rent listed right now.

Request a Liebherr R 9300

Does a Liebherr R 9300 fit in a shipping container?

The machine as it stands on the sheet. Your haulier or forwarder confirms the load.

No. As it stands on the sheet the Liebherr R 9300 is 7.59 m wide against a 2.34 m door opening, 7.36 m high against a 2.28 m door and 17.40 m long against 12.03 m inside of a standard container, so it ships on a flat rack, by RoRo or as break-bulk unless it is stripped down.

Length
17.4 m
Width
7.59 m
Height
7.36 m
Weight
252 t

Container figures: door opening 2.34 m wide by 2.28 m high, 5.9 m inside a 20 ft box and 12.03 m inside a 40 ft one (Hapag-Lloyd container specification). A size check only: payload is on each container's plate. Trailer class and road permits depend on the haulier and the route, so they are not given here.

Tools for a Liebherr R 9300

For the people who run one: codes, charts and calculators that fit an excavator.

Same class: 50 ton and larger excavators

50 ton and larger excavators with an operating weight of 45 t and up, lightest first. The Liebherr R 9300 is 10 of 10; every figure is the maker's.

  1. 2Cat 34948.1 t
  2. 3Volvo EC48048.5 t
  3. 4Hitachi ZX490LCH49.4 t
  4. 5Cat 35249.9 t
  5. 6SANY SY500H54.5 t
  6. 7Cat 37474 t
  7. 8Cat 390F86.8 t
  8. 9Cat 39594.1 t
  9. 10Liebherr R 9300This page252 t

Showing 2 to 10 of 10, the machines nearest the Liebherr R 9300 by operating weight.

More Liebherr R 9300 questions

What size bucket does a Liebherr R 9300 take?

16.5 m³ (21.58 yd3) is the bucket the maker quotes its figures with; other sizes fit.

How far can a Liebherr R 9300 reach?

Its maximum reach at ground level is 15.6 m (51 ft 2 in).

How tall is a Liebherr R 9300?

7.36 m (24 ft 2 in) overall.

How wide is a Liebherr R 9300?

7.59 m (24 ft 11 in) overall.

How high can a Liebherr R 9300 dig?

Its maximum digging height is 14.9 m (48 ft 9 in), max teeth height.

What is the tail swing radius of a Liebherr R 9300?

6.014 m (19.7 ft).

What is the hydraulic flow of a Liebherr R 9300?

2,048 L/min (4 x 135 gpm).

How fast does a Liebherr R 9300 go?

Its top speed is 2.4 km/h (1.5 mph), travel speed 0-2.4 km/h.

What are the Liebherr R 9300's main competitors?

The machines nearest it in size are the Cat 395, the Cat 390F and the Cat 374. Each has a side-by-side comparison on EquipmentsFinder.

Is the Liebherr R 9300 sold in the UAE?

Not new through a Gulf dealer: it is sold in other markets worldwide. Used and imported machines do come up on EquipmentsFinder.

What is a Liebherr R 9300 used for?

A crawler excavator: a digging arm and bucket on a cab that turns all the way round, on tracks for grip and stability. Typical jobs: digging foundations and trenches, loading dump trucks, demolition with a breaker, lifting pipes into trenches.

Embed this spec card

The Liebherr R 9300's key figures as a small card for your own page. Copy the code and paste it where the card should go; the card stays up to date with the sheet here.

<iframe src="https://www.equipmentsfinder.com/embed/models/liebherr-r9300" title="Liebherr R 9300 specs" width="100%" height="480" style="border:0;max-width:480px" loading="lazy"></iframe>
<p style="font-size:12px"><a href="https://www.equipmentsfinder.com/models/liebherr-r9300">Liebherr R 9300 specs</a> by <a href="https://www.equipmentsfinder.com">EquipmentsFinder</a></p>

Calculators and other cards to embed are in the embed kit.

Need a Liebherr R 9300 on site?

Post the job: where, when and for how long. Suppliers with a machine contact you directly. Free to post.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.