EF Logo

Ground bearing pressure calculator for machines and crane pads

Find the pressure a tracked machine, an outrigger pad or a mat puts on the ground, and check it against what the soil can safely carry.

The formula

Pressure (kPa) = weight (t) × 9.80665 ÷ contact area (m²). Tracked area = 2 × shoe width × track length.

What it works out

Find the pressure a tracked machine or a pad puts on the ground, and compare it with what the soil can carry.

Why it matters

A heavy machine on soft ground bogs down or tips; check before it gets there.

How to use it

  1. Choose the Load Type: a tracked machine, or a point load such as an outrigger or pad.
  2. For a tracked machine enter the operating weight in tonnes, the track shoe width in mm and the track length on the ground in m.
  3. For a point load enter the load in tonnes and the pad length and width.
  4. Pick the Ground, or enter the allowable bearing from the soil report. Read the pressure in kPa, psi and kg/cm², the Safety Ratio and the Utilisation.

Quick reference

Printable chart

Excavator ground pressure by weight (600 mm shoes, 3.2 m on the ground, firm clay)

Weight (t)Pressure (kPa)Pressure (psi)Of allowable (%)
820.43 kPa2.96 psi13.62 %
1435.75 kPa5.19 psi23.84 %
2256.18 kPa8.15 psi37.46 %
3076.61 kPa11.11 psi51.08 %
40102.2 kPa14.82 psi68.1 %
50127.7 kPa18.52 psi85.13 %

Average pressure on firm clay at 150 kPa allowable. Change the inputs above for your machine and ground.

The formula

Pressure = weight ÷ contact area. Weight in kN is tonnes × 9.80665, and kPa is kN per m². A tracked machine rests on two tracks, so the area is 2 × shoe width × track length on the ground. The result is the average pressure; 1 kPa = 0.145 psi = 0.0102 kg/cm².

Average is not the peak

Pressure is rarely even along a track. It peaks under the drive sprocket or the idler and rises when the machine digs over the end of its tracks or carries a load on the boom, often to 1.5 to 2 times the average. Treat the average as the minimum check, and add a margin when the machine slews or lifts.

Allowable bearing of the ground

The typical allowable values here are 75 kPa for soft clay, 150 kPa for firm clay, 300 kPa for compacted gravel and 1,000 kPa for sound rock. They are guide figures only. Fill, a high water table or a recent excavation next to the machine can cut them sharply, so use the geotechnical report for the site. When the pressure is above the allowable, widen the shoes, lay mats, or compact and replace the top layer.

Worked examples

  • A 22 t excavator on 600 mm shoes with 3.2 m of track on the ground puts 56.18 kPa (8.15 psi, 0.5729 kg/cm²) on the ground, 37.46 % of firm clay’s allowable.
  • A 45 t machine on 800 mm shoes gives 65.67 kPa on a contact area of 6.72 m². On soft clay allowing 75 kPa, the safety ratio is 1.14.
  • A 40 t outrigger load on a 1 m × 1 m pad is 392.3 kPa on compacted gravel allowing 300 kPa, a utilisation of 130.8 %.

Frequently asked questions

How do I calculate the ground pressure of an excavator?

Convert the operating weight to kN (tonnes × 9.807) and divide by the area of both tracks on the ground. The calculator above does this.

What is a typical ground pressure for an excavator?

Most excavators and dozers on standard shoes put 40 to 100 kPa on the ground, far less than a wheeled machine or an outrigger pad.

How do I convert kPa to psi?

Multiply kPa by 0.145. Or read it straight from the calculator, which shows psi and kg/cm² as well.

What is the allowable bearing pressure of soil?

Soft clay about 75 kPa, firm clay about 150, compacted gravel about 300 and rock about 1,000 or more. The site investigation gives the real value.

What if the pressure is higher than the soil can carry?

Spread the load: wider shoes, timber or steel mats, or improved ground. Never rely on the average alone for a lifting machine.

Add this calculator to your website

Copy the code and paste it into your page. The calculator is free and works as it does here.

<iframe src="https://www.equipmentsfinder.com/embed/field-tools/ground-bearing-pressure-calculator" title="Ground bearing pressure calculator for machines and crane pads" width="100%" height="620" style="border:0;max-width:720px" loading="lazy"></iframe>
<p style="font-size:12px"><a href="https://www.equipmentsfinder.com/field-tools/ground-bearing-pressure-calculator">Ground bearing pressure calculator for machines and crane pads</a> by <a href="https://www.equipmentsfinder.com">EquipmentsFinder</a></p>
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.