The formula
Size = the larger of the depth need and the output need, capped by access.
What it works out
The excavator weight class a job needs.
Why it matters
Hire a machine that reaches deep enough, digs fast enough and fits on site.
How to use it
- Enter the Deepest Dig in meters: the depth of the trench, pit or basement, measured from where the machine stands.
- Enter the Soil to Dig per Day in cubic meters, the volume you need to excavate in one working day.
- Enter the Narrowest Access in meters: the smallest gate, passage or trench the machine must get through.
- Read the Size for Depth and Size for Output, then the Recommended Size, which is the larger of the two limited by access.
- Check the Typical Bucket and Typical Dig Depth, then look for that class in the rental listings.
Quick reference
Printable chartExcavator size chart by dig depth
| Deepest dig (m) | Excavator size (t) | Typical bucket (m³) | Max dig depth (m) |
|---|---|---|---|
| 2 | 1.7 t | 0.04 m³ | 2.2 m |
| 3 | 3.5 t | 0.1 m³ | 3.1 m |
| 4 | 8 t | 0.3 m³ | 4.4 m |
| 5 | 14 t | 0.6 m³ | 5.6 m |
| 6 | 20 t | 1 m³ | 6.6 m |
| 7 | 30 t | 1.4 m³ | 7.3 m |
| 8 | 50 t | 2.6 m³ | 8.3 m |
Sized for depth with no access limit and a small daily volume. Each row shows the smallest class that reaches that depth, with its typical bucket and maximum dig depth.
How the size is chosen
The calculator compares nine weight classes: 1.7, 3.5, 6, 8, 14, 20, 30, 40 and 50 tonnes. The Size for Depth is the smallest class whose typical maximum dig depth reaches your depth. The Size for Output is the smallest class whose typical daily output covers your soil volume. The Recommended Size is the larger of the two, but never bigger than the access allows: under 1.2 m wide the cap is a 1.7 t mini excavator, under 1.8 m it is 3.5 t, and under 2.4 m it is 8 t.
What changes the result
The figures are mid-range values from manufacturers’ spec sheets, so a specific model can dig a little deeper or shallower. Soil type matters too: hard clay, rock and caliche slow the machine and may need a larger class or a breaker. Truck availability and haul distance also limit output, however big the excavator is. If the access cap is smaller than the size needed for depth or output, the answer is a smaller machine working longer, or more than one machine.
Choosing on UAE sites
Villa foundations and service trenches are often done with 3.5 to 8 tonne machines, while road, drainage and basement work in Dubai and Abu Dhabi usually uses 14 to 30 tonnes. Check the reach on the supplier’s spec sheet for the exact model, ask whether the quote includes the operator, and plan for the low-bed that delivers larger machines. This is a sizing guide only; the supplier should confirm the machine for your site.
Worked examples
- A 4 m deep trench with 150 m³ of soil a day and a wide gate needs a 8 t class for depth and 8 t for output, so the recommendation is 8 t, with a typical bucket of 0.3 m³.
- A 2.5 m service trench through a 1.5 m gap: the depth and output call for 3.5 t, with a typical dig depth of 3.1 m.
- A 6 m deep basement dig with 800 m³ a day suggests 30 t, since output asks for 30 t and depth only 20 t.
- A 5 m dig through a 2 m access would call for 14 t or more on its own, but the access limits the recommendation to 8 t.
Frequently asked questions
What size excavator do I need?
It depends on the deepest dig, the soil you must move each day and the access to the site. Enter those three in the calculator above and read the Recommended Size.
What size excavator is needed to dig 4 meters deep?
The calculator’s chart puts a 4 m dig in the 8 tonne class, which has a typical maximum dig depth of 4.4 m. Check your exact model’s spec sheet.
What are the common excavator sizes and weights?
This tool uses 1.7, 3.5, 6, 8, 14, 20, 30, 40 and 50 tonne classes, from mini excavators to large mass-excavation machines. The chart above shows the bucket and dig depth that go with each class.
How big a bucket does a 20 tonne excavator have?
In this tool a 20 tonne excavator has a typical bucket of 1.0 m³. Buckets vary with the model and the material being dug.
Can a bigger excavator always do the job faster?
Not if the site is tight or trucks cannot keep up. Narrow access limits the size you can bring in, and haulage often limits output before the excavator does.
Add this calculator to your website
Copy the code and paste it into your page. The calculator is free and works as it does here.
<iframe src="https://www.equipmentsfinder.com/embed/field-tools/excavator-size-calculator" title="Excavator size calculator" width="100%" height="620" style="border:0;max-width:720px" loading="lazy"></iframe> <p style="font-size:12px"><a href="https://www.equipmentsfinder.com/field-tools/excavator-size-calculator">Excavator size calculator</a> by <a href="https://www.equipmentsfinder.com">EquipmentsFinder</a></p>
