EF Logo

JLG · Hydraulic

JLG Fault Code 2‑8

Hydraulic filter bypassed

What does JLG code 2-8 mean?

The return filter or charge pump filter bypass switch has tripped, meaning the filter is clogged or the oil is too cold. Not reported during the 2-second power-up. Urgency: check soon - the machine may derate or limit a function. Check first: note whether Help says RETURN FILTER BYPASSED or CHARGE PUMP FILTER BYPASSED.

FaultCheck2-8JLG · Hydraulic

Can I keep running with it?

Check soon

The machine may derate or limit a function. Find the cause before the next shift.

What should I check first?

Note whether Help says RETURN FILTER BYPASSED or CHARGE PUMP FILTER BYPASSED

Then 3 more checks
Code shows hereFAULT2-8

Where this code shows

Turn the key on and watch the fault lamp or platform display.

Checks

0 of 4 done

Causes

  • Return filter element clogged
  • Charge pump filter clogged
  • Cold hydraulic oil causing a temporary restriction
  • Bypass switch wiring open or shorted

How it failed

You'll notice: A bypass warning shows and the lamp flashes 2-8.

Real conditionRead from how the source describes the code

The sensor reading is valid but outside the allowed range - the problem may be real.

allowed rangetime
The reading against the band the controller allows.
Meter test
Check the real value with a separate gauge or thermometer before blaming the sensor.
Good result
If the gauge agrees with the display, fix the machine, not the sensor.

When to stop

Lower attachments to the ground and relieve hydraulic pressure before loosening any fitting. Never feel for a leak with your hand - oil under pressure can inject through skin.

Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Source

JLG 600S/600SJ/660SJ/600A/AJ Service and Maintenance Manual 3120840, section 6 (Tables 6-3, 6-5)

This source lists 2-8 and its meaning. The guidance on this page is general, not taken from it.

The source covers: JLG boom lifts with the JLG Control System (600S, 600SJ, 660SJ, 600A/AJ, 450A, 510A, 400S, 1200/1350SJP families).

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.