J1939 · Aftertreatment - DPF
SPN 4795 Fault Code
Aftertreatment 1 diesel particulate filter missing
What does SPN 4795 mean?
A detection that the DPF appears to be absent, inferred from exhaust pressure and temperature behaviour. It is used to catch removed or deleted filters. How urgent it is depends on the FMI after SPN 4795 - pick it below. Check first: inspect the exhaust and confirm the DPF is fitted and intact.
- SPN 4795
- Aftertreatment 1 diesel particulate filter missing
- FMI ?
- How it failed - the number after the SPN
Can I keep running with it?
Depends on the FMI
How urgent it is depends on the FMI after SPN 4795 - pick it below.
What should I check first?
Inspect the exhaust and confirm the DPF is fitted and intact
Then 4 more checksWhere to read it
Connect a J1939-capable scan tool to the 9-pin diagnostic port.
Which FMI shows after SPN 4795?
You'll notice: The ECM believes the diesel particulate filter is missing or has been removed, so it logs a fault and may derate.
Find the number shown after SPN 4795 on your display.
- 31SPN 4795 FMI 31: A condition exists: the ECM is flagging a defined state rather than a circuit failureReal conditionCummins ISX15
Checks
0 of 5 done
When to stop
Repeated aftertreatment faults lead to an engine derate. Parked regenerations and dosing tests are run with the service tool; do not remove or bypass DPF or SCR parts.
How urgent SPN 4795 is depends on its FMI and whether the engine has derated. Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Causes
- Filter removed or replaced with a pipe or hollowed-out unit
- Differential pressure hoses or sensor disconnected, so no pressure drop is seen
- Pressure sensor reading wrongly from a wiring or hose fault
- Filter cracked or damaged internally, giving little pressure drop
Other Aftertreatment - DPF codes
Source
Cummins ISX15 2010-2012 fault code list (Diesel Laptops)
This list names SPN 4795 and the FMIs above for the engines it covers. The guidance on this page is general, not taken from it.
The source covers: Cummins ISX15 (2010-2012) and X15; same SPN on other J1939 engines.
Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
