EF Logo

Cummins · Aftertreatment - SPN 3362 FMI 31

Cummins Fault Code 1682

DEF dosing unit input lines - condition exists

What does Cummins code 1682 mean?

The ECM sees a problem with the DEF supply or return lines going to the dosing unit, such as a leak, a blockage or a swapped line. The DEF cannot be dosed in the correct quantity. Urgency: check soon - the machine may derate or limit a function. Check first: look over all DEF lines for leaks, crystals and kinks from the tank to the dosing unit.

FaultCheck1682Cummins · Aftertreatment - SPN 3362 FMI 31

Can I keep running with it?

Check soon

The machine may derate or limit a function. Find the cause before the next shift.

What should I check first?

Look over all DEF lines for leaks, crystals and kinks from the tank to the dosing unit

Then 4 more checks
Plug the service tool in hereDiagnosticport, 9-pin

Where to read it

Connect INSITE or another J1939-capable scan tool to the 9-pin diagnostic port.

Checks

0 of 5 done

Causes

  • DEF supply or return line kinked, plugged or swapped at the dosing unit
  • DEF line leaking or frozen
  • DEF pump or filter plugged with crystals
  • Wrong line connector fitted after service work

How it failed

You'll notice: A DEF or SCR warning and possibly a power derate.

OtherRead from how the source describes the code

The source does not say how this one failed.

Meter test
Read the code with the service tool and note which other codes are active with it.
Good result
Codes that appear together usually share one cause - start with the wiring they share.

When to stop

Repeated aftertreatment faults lead to an engine derate. Parked regenerations and dosing tests are run with the service tool; do not remove or bypass DPF or SCR parts.

Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Same part, other failures: DEF dosing unit, valves and heater

Show the other 21 codes
All 30 DEF dosing unit, valves and heater codes on one page

Source

Cummins ISX15 (2013-2018) Fault Codes List (Diesel Repair)

This source lists 1682 and its meaning. The guidance on this page is general, not taken from it.

The source covers: Cummins ISX15/X15/ISB6.7/B6.7/L9 engines (J1939 SPN 3362, FMI 31); same code list used in trucks, buses and machines with these engines.

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.