EF Logo

Cat · Power supply

Cat Fault Code CID 168 FMI 00

Electrical system voltage high

What does Cat code CID 168 FMI 00 mean?

The engine ECM measured battery voltage above 32 V on the 24 V system. On the 924H the manual points straight at the charging system, because a runaway alternator raises the whole system voltage. Urgency: stop now - shut down and fix before working on. Check first: connect Cat ET, start the engine and confirm 168-0 is active, not just logged.

FaultStopCID 168FMI 00Cat · Power supply
CID 168
Which component is at fault
FMI 00
Data above normal, most severe

Can I keep running with it?

Stop now

Shut down and fix before working on. Running on risks damage or the machine locks out.

What should I check first?

Connect Cat ET, start the engine and confirm 168-0 is active, not just logged.

Then 4 more checks
Code shows hereFAULTCID 168FMI 00

Where this code shows

Turn the key on and check the cluster or monitor for a warning lamp.

Checks

0 of 5 done

Causes

  • Alternator regulator running away and overcharging
  • Alternator output cable or plug fault
  • Engine ECM misreading the supply (rare)

How it failed

You'll notice: Warning lamp on the cluster and possibly a high system voltage event with it.

Real conditionRead from FMI 0: data above normal, most severe

The sensor reading is valid but outside the allowed range - the problem may be real.

allowed rangetime
The reading against the band the controller allows.
Meter test
Check the real value with a separate gauge or thermometer before blaming the sensor.
Good result
If the gauge agrees with the display, fix the machine, not the sensor.

When to stop

Most sensor and wiring faults can be traced with a multimeter and the wiring diagram. Disconnect the battery before unplugging controllers; if the controller itself is suspect or needs programming, that needs the dealer’s service tool.

Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Same part, other failures: System voltage, key switch and starting

Source

TM 5-3805-298-23-1 Field Maintenance Manual, 924H Wheel Loader, troubleshooting tables (CID 168 FMI 00)

This source lists CID 168 FMI 00 and its meaning. The guidance on this page is general, not taken from it.

The source covers: Cat 924H wheel loader with C6.6 engine (engine ECM), per the 924H field maintenance manual; the same CID-FMI scheme is used on other Cat machines with C-series ECMs.

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.