J1939 · Aftertreatment - DPF
SPN 3249 Fault Code
DPF intake temperature
What does SPN 3249 mean?
Exhaust temperature entering the DPF, used to control regeneration. How urgent it is depends on the FMI after SPN 3249 - pick it below. Check first: read the sensor in live data and compare it with the DOC outlet sensor, which should be nearly the same.
- SPN 3249
- DPF intake temperature
- FMI ?
- How it failed - the number after the SPN
Can I keep running with it?
Depends on the FMI
How urgent it is depends on the FMI after SPN 3249 - pick it below.
What should I check first?
Read the sensor in live data and compare it with the DOC outlet sensor, which should be nearly the same
Then 4 more checksWhere to read it
Connect a J1939-capable scan tool to the 9-pin diagnostic port.
Which FMI shows after SPN 3249?
You'll notice: The controller may reduce regeneration or derate to protect the DPF.
Find the number shown after SPN 3249 on your display.
- 2SPN 3249 FMI 2: DPF intake temperature data is erratic, intermittent or incorrectErratic or implausibleMack MP8, Mack MP7, Volvo D13
- 4SPN 3249 FMI 4: DPF intake temperature signal voltage is below normal, or the circuit is shorted to a low sourceShorted lowMack MP8, Mack MP7, Volvo D13
- 5SPN 3249 FMI 5: Current in the DPF intake temperature circuit is below normal, or the circuit is openOpen circuitMack MP8, Mack MP7, Volvo D13
- 15SPN 3249 FMI 15: DPF intake temperature is above the normal range, least severe levelReal conditionMack MP8, Mack MP7, Volvo D13
Checks
0 of 5 done
When to stop
Repeated aftertreatment faults lead to an engine derate. Parked regenerations and dosing tests are run with the service tool; do not remove or bypass DPF or SCR parts.
How urgent SPN 3249 is depends on its FMI and whether the engine has derated. Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Causes
- Sensor failed or wiring damaged
- Intake sensor tip fouled with fuel and soot
- Connector corrosion
- Real high temperature from over-dosing
Other Aftertreatment - DPF codes
- SPN 3245DPF outlet temperature
- SPN 81DPF intake pressure
- SPN 3242DPF intake temperature sensor
- SPN 3246DPF outlet temperature sensor
- SPN 3250Diesel oxidation catalyst outlet temperature
- SPN 3251DPF differential pressure
- SPN 3471Aftertreatment hydrocarbon dosing valve
- SPN 3480Aftertreatment fuel pressure sensor
Source
Mack MP8 2010-2013 fault code list (Diesel Laptops)
This list names SPN 3249 and the FMIs above for the engines it covers. The guidance on this page is general, not taken from it.
The source covers: Mack MP7, Mack MP8, Volvo D13; same SPN on other J1939 engines.
Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
